IRAS16293Band9
Science target overview
description of what the iras source is.
ALMA data description
This release of ALMA data is for observations taken in the Band 9 (602-720 GHz) using the FDM (Frequency Division Mode) setup. The observations target the CO 6-5 spectral line at a frequency of 691.473 GHz using four spectral windows of 1.875 GHz (813 km/s) wide with 3840 channels each. The channel width is 0.488 MHz (0.2 km/s), and because the observations use Hanning smoothing, the actual spectral resolution, and so the velocity resolution, is twice the channel spacing.
The data were taken during April 16 and 17, 2012. Four datasets are presented here with three of them having post-transit observations of the target source, while the other one has pre-transit. Each dataset lasts for 2.3 hours, including calibrations. The names of the datasets are
- uid___A002_X3d4118_X39b
- uid___A002_X3d55cb_X575
- uid___A002_X3d55cb_Xb50
- uid___A002_X3d55cb_X90c
The array was used in the corresponding Early Science Cycle 0 extended configuration. The expected angular resolution at the frequency of the CO (6-5) line is about 0.2 arcsec.
Download the data
To download all the data, follow one of the next links:
The links provide you with the option to download the following gzipped tar files:
IRAS16293_Band9_UnCalibratedMSandTablesForReduction - The file contains the raw data files in ALMA Science Data Model (ASDM) format already converted into CASA Measurement Sets (MS) using importasdm inside CASA. The tables that are needed to calibrate the data are also provided.
IRAS16293_Band9_CalibratedData - The fully-calibrated u-v data, ready for imaging.
IRAS16293_Band9_ReferenceImages - The final continuum and spectral line images.
Depending on how you want to proceed to work with the IRAS16293 data, download the file that corresponds.
NOTE: CASA 3.3 is required to follow this guide. For more information on obtaining the latest version of CASA, see http://casa.nrao.edu.
IRAS16293 data tutorials
This tutorial has been split into two parts - calibration and imaging:
1) IRAS16293 Band9 - Calibration : This section of the tutorial steps you through inspection and calibration of the basic visibility (u-v) data. To complete this part, you will need the data in the first directory: IRAS16293_Band9_UnCalibratedMSandTablesForReduction.
2) IRAS16293 Band9 - Imaging : This part of the tutorial focuses on constructing images from the fully calibrated visibility data. If you wish to skip calibration and proceed directly to this part of the tutorial, you will need the fully-calibrated visibility data in the IRAS16293_Band9_CalibratedData directory.
We also provide the final continuum and spectral line images in the IRAS16293_Band9_ReferenceImages directory.
How to Use A CASA Guide
For tips on using CASA and ways CASA can be run, see EVLA_Spectral_Line_Calibration_IRC+10216#How_to_Use_This_casaguide page.
To learn how to extract executable Python scripts from the tutorial, see Extracting_scripts_from_these_tutorials.
Within the guides:
# In CASA
Regions of this color are CASA commands (or definitions) that need to be cut and
pasted in sequence. Wait until one command is finished before pasting another.
Tabs matter in python, make sure that commands that span more than one line and
"for" loops keep their spacing. Sometimes (especially "for" loops) you may need to
explicitly hit enter twice to get the command going.
Information in this color shows excerpts from the CASA Logger output
This color shows you background information about the data or other types of reference material
Last checked on CASA Version 3.0.0 (r9860).
