Sunspot Band6 Feathering for CASA 6.5.4
Last checked on CASA Version 6.5.4
Overview
This guide features CARTA, the “Cube Analysis and Rendering Tool for Astronomy,” which is the new NRAO visualization tool for images and cubes. The CASA viewer (imview) has not been maintained for a few years and will be removed from future versions of CASA. We strongly recommend using CARTA, as it provides a much more efficient, stable, and feature rich user experience. A comparison of the CASA viewer and CARTA, as well as instructions on how to use CARTA at NRAO, is provided in the CARTA section of the CASA docs.
This portion of the Sunspot Band6 guide covers the combination process between the synthesized solar image and the full-sun image obtained with the TP array. It is the final step after: 1) calibrating the IF visibility data; 2) imaging the IF data; 3) calibrating and imaging the single-dish data. If you wish, you may skip parts 1 and 2, download the calibrated data package, Sunspot_Band6_CalibratedData.tgz, and complete part 3.
If you completed parts 1 and 2, we assume that you are working in the directory Sunspot_Band6_UncalibratedData. If you skip parts 1 and 2, and use the provided calibrated data, we assume that the working directory is Sunspot_Band6_CalibratedData.
Prepare the Single-Dish Data for Combination
List the Image Header
We start by defining names for our images.
# In CASA
int_base = 'AR12470_B6AllSpw_I' # basename of the interferometric image
sd_img_base = 'uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3' # basename of the single dish image
out_base = 'AR12470_B6AllSpw_I_Feather' # basename of the combined products
Now let's examine the single dish image header with imhead and mode='list'.
# In CASA
imhead(imagename=sd_img_base+'.rescl', mode='list')
Output are the supported keywords and their values in the format hdkey: hdvalue.
General --
-- imtype: Intensity
-- object: Sun
-- equinox: J2000
-- date-obs: 2015/12/18/20:12:21.416250
-- observer: lknee
-- projection: SIN
-- restfreq: [248000000000.1]
-- reffreqtype: LSRK
-- telescope: ALMA
-- beammajor: 26.722411arcsec
-- beamminor: 26.722411arcsec
-- beampa: 0deg
-- bunit: K
-- masks: [mask0]
-- shape: [800, 800, 1, 1]
-- datamin: 83.8561
-- datamax: 7369.92
-- minpos: 17:44:43.874 -23.04.42.909 I 2.4799e+11Hz
-- minpixpos: [244, 770, 0, 0]
-- maxpos: 17:43:24.017 -23.17.12.723 I 2.4799e+11Hz
-- maxpixpos: [611, 520, 0, 0]
axes --
-- ctype1: Right Ascension
-- ctype2: Declination
-- ctype3: Stokes
-- ctype4: Frequency
crpix --
-- crpix1: 400.0
-- crpix2: 400.0
-- crpix3: 0.0
-- crpix4: 0.0
crval --
-- crval1: 266.02.29.400deg.min.sec
-- crval2: - 23.23.13.143deg.min.sec
-- crval3: ['I']
-- crval4: 247990336130.1Hz
cdelt --
-- cdelt1: - 0.00.03.000deg.min.sec
-- cdelt2: 0.00.03.000deg.min.sec
-- cdelt3: 1
-- cdelt4: 1999922065.6Hz
units --
-- cunit1: rad
-- cunit2: rad
-- cunit3:
-- cunit4: Hz
Convert the Brightness Unit
The unit of the full-sun map is Kelvin. On the other hand, the unit of the synthesized image is Jy/beam. We retrieve frequency and beam size information with imhead, then convert the brightness values from K to Jy/beam with immath. This will produce a new image with the scaled values.
# In CASA
# derive a scaling factor based on frequency and beam size
crval4S= imhead(sd_img_base+'.rescl', mode='get', hdkey='crval4')
freqSD = crval4S['value']
sbema = imhead(sd_img_base+'.rescl', mode='get', hdkey='beammajor')
sbemi = imhead(sd_img_base+'.rescl', mode='get', hdkey='beamminor')
sbmajor = sbema['value']
sbminor = sbemi['value']
convKJb = str(13.6 * (300./(freqSD/1.e9))**2. * (1./sbmajor)*(1./sbminor))
# create a new image with scaled values
import os
os.system(f'rm -rf {sd_img_base}.jyb.im')
immath(imagename=sd_img_base+'.rescl', expr='IM0/'+convKJb, outfile=sd_img_base+'.jyb.im')
Next, change the brightness unit of the new image from K to Jy/beam using imhead and mode='put':
imhead(imagename=sd_img_base+'.jyb.im', mode='put', hdkey='bunit', hdvalue='Jy/beam')
Obtain the RA/Dec Coordinate of the Sun Center at the Reference Time
Before starting the combination process in CASA, we need to know the RA/Dec coordinate of the sun center at the reference time, which is used during the interferometric observation, because the observing time of the TP-array is not exactly the same. The Sun was moving on the RA/Dec coordinate frame during the gap between these observations. We need to shift the coordinate of the full-sun image based on the coordinate of the sun center at the reference time. The reference time of the observation is:
19:49:00UT, December 18 2015.
We obtain the RA/Dec coordinate of the sun center estimated from JPL's HORIZONS system:
RA: 266.01898 degree
Dec: -23.38648 degrees.
Change the Coordinate
RA/Dec are shown in the image header as ctype1/ctype2, which correspond to crval1/crval2. We shift the coordinate based on the RA/Dec coordinate obtained in the previous section by using mode='put' as follows.
# In CASA
import numpy as np
sun_ra = str(266.01898 * np.pi/180.)
sun_dec = str(-23.38648 * np.pi/180.)
imhead(imagename=sd_img_base+'.jyb.im', mode='put', hdkey='crval1', hdvalue=sun_ra)
imhead(imagename=sd_img_base+'.jyb.im', mode='put', hdkey='crval2', hdvalue=sun_dec)
The result of the process is shown in Figure 1. The look of the image has not changed, but the coordinates and units are now changed to match the synthesized image.
Regrid and Trim
Now we re-grid with and trim the full-sun image with imregrid and imsubimage to match the size of the synthesized image.
# In CASA
os.system(f'rm -rf {sd_img_base}.jyb.regrid')
imregrid(imagename=sd_img_base+'.jyb.im', template=int_base+'.image', axes=[0,1], output=sd_img_base+'.jyb.regrid')
os.system(f'rm -rf {sd_img_base}.jyb.regrid.subim')
imsubimage(imagename=sd_img_base+'.jyb.regrid', outfile=sd_img_base+'.jyb.regrid.subim', box='100,100,400,400')
Finally, we multiply the trimmed single-dish image by a trimmed version of the primary beam response of the synthesized image:
# In CASA
os.system(f'rm -rf {int_base}.pb.subim')
imsubimage(imagename=int_base+'.pb', outfile=int_base+'.pb.subim', box='100,100,400,400')
os.system(f'rm -rf {sd_img_base}.jyb.regrid.subim.depb')
immath(imagename=[sd_img_base+'.jyb.regrid.subim',int_base+'.pb.subim'], expr='IM0*IM1', outfile=sd_img_base+'.jyb.regrid.subim.depb', imagemd=sd_img_base+'.jyb.regrid.subim')
Prepare the Synthesized Image for Combination
To fit the map area to that of the trimmed single-dish image, we do the trimming for the synthesized image.
# In CASA
imsubimage(imagename=int_base+'.image', outfile=int_base+'.image.subim', box='100,100,400,400')
Combination and Primary Beam Correction
The combining of the maps can be done using 'feathering' task, as the same as the non-solar data.
# In CASA
feather(imagename=out_base+'.image', highres=int_base+'.image.subim',lowres=sd_img_base+'.jyb.regrid.subim.depb')
CAUTION: In this tutorial and the packages of the solar SV data released on 2017/01/18, we use the default parameters of the task, as shown above. As a result, the averaged brightness temperature of the combined image is always larger a few % than the temperature brightness at the same position in the single-dish map, although the values have to be the same basically. It means that you need to tune the “sdfactor" parameter of the task for obtaining consistent images, before using combined images for your science. The detail of the parameter is described in Section 5.6 of “CASA User Reference & Cookbook Release 4.7.0”[1].
After the feathering process, we do the primary beam correction, as follows.
# In CASA
impbcor(imagename=out_base+'.image', pbimage=int_base+'.flux.subim', outfile=out_base+'.pbcor', mode='divide')
To convert the unit from Jy/beam to Kelvin, we use the following commands.
# In CASA
crval4I= imhead(int_base+'.image', mode='get',hdkey='crval4')
freq = crval4I['value']
fbema = imhead(out_base+'.image', mode='get',hdkey='beammajor')
fbemi = imhead(out_base+'.image', mode='get',hdkey='beamminor')
fbmajor = fbema['value']
fbminor = fbemi['value']
convKJb2 = str(13.6 * (300./(freq/1.e9))**2. * (1./fbmajor)*(1./fbminor))
immath(imagename=out_base+'.pbcor',expr='IM0*'+convKJb2, outfile= out_base+'_K.pbcor')
imhead(imagename=out_base+'_K.pbcor', mode='put', hdkey='bunit', hdvalue='K')
Finally, we create the FITS file of the combined and primary corrected map.
# In CASA
exportfits(imagename=out_base+'_K.pbcor', fitsimage=out_base+'_K.fits')
The result of the combining is shown in Figure 4.
Caution: The single-dish images and feathering images in the solar SV data packages (ex. Sunspot_Band6_ReferenceImages.tgz) were not applied the re-scaling to the single-dish data (see Sunspot_Band6_SingleDish_for_CASA_6.5.4#Calibration_.28re-scaling.29_after_Imaging). Please do not use the reference image for your science.
