From CASA Guides
Revision as of 10:19, 2 November 2012 by Jcrossle
The python utility is called simutil.py, and is located in a scripts directory of your installation.
CASA <> execfile(".../simutil.py") CASA <> util=simutil() CASA <> util<TAB>
- Returns the average of directions as a string, and relative offsets
- simutil.calc_pointings(spacing, imsize, cell, direction=None, relmargin=0.5)
- If direction is a list, simply returns direction and the number of pointings in it. Otherwise, returns a hexagonally packed list of pointings separated by spacing and fitting inside an image specified by direction, imsize and cell, and the number of pointings. The hexagonal packing starts with a horizontal row centered on direction, and the other rows alternate being horizontally offset by a half spacing. All of the pointings will be within a rectangle relmargin * spacing smaller than the image on all sides.
- simutil.ephemeris(date, direction=None, telescope=None)
- calculate the elevation of a source on a date, in a direction, seen from a telescope
- simutil.irtf2loc(x, y, z, cx, cy, cz)
- convert ITRF earth-centered xyz coordinates to offsets in the local tangent plane offsets from the center of the array cx,cy,cx
- simutil.locxyz2itrf(latitude, longitude, locx=0.0, locy=0.0, locz=0.0)
- Returns the nominal ITRF (X, Y, Z) coordinates (m) for a point at "local" (x, y, z) (m) measured at geodetic latitude lat and longitude longitude (degrees). The ITRF frame used is not the official ITRF, just a right handed Cartesian system with X going through 0 latitude and 0 longitude, and Z going through the north pole. The "local" (x, y, z) are measured relative to the closest point to (lat, longitude) on the WGS84 reference ellipsoid, with z normal to the ellipsoid and y pointing north.
- simutil.long2xyz(long, lat, elevation, datum)
- convert geodetic longitude latitude, and elevation (relative to the geoid of specified datum) to earth-centered x,y,z
- simutil.xyz2long(x, y, z, datum)
- convert earth-centered x,y,z to geodetic latitude and longitude
- simutil.utm2xyz(easting, northing, elevation, zone, datum, nors)
- convert UTM coordinates to x,y,z earth-centered
- simutil.utm2long(east, north, zone, datum, nors)
- convert universal transverse meractor coordinates to geodetic longitude/latitude (see help simutil.utm2long for more details
- read an antenna configuration file (and perform necessary geodetic conversions)
- simutil.noisetemp(telescope=None, freq=None, diam=None, epsilon=None)
- look up receiver temperature, antenna efficiencies, etc for known telescopes
- simutil.plotants(x, y, z, d, name)
- a prettier plotants than CASA native, including antenna diameter and pad name (e.g. for compact arrays, the antennas will be plotted with actual sizes to scale)
- simutil.statim(image, plot=True, incell=None)
- plot image and return and overplot statistics
For more detailed examples, find the python script for the simdata task, which is a file called task_simdata.py in your distribution.