Simulation Recipes

From CASA Guides
Revision as of 14:33, 16 December 2009 by Rindebet (talk | contribs) (Nearby edge-on spiral)

Massively Under Construction

(i.e. don't believe what you see here yet, or ask me when it doesn't make sense :)


Nearby edge-on spiral

Roughly modeled after NGC891

  • model data: Milky Way 13CO from the Galactic Ring Survey on the 14m FCRAO
  • units: K - first convert to flux surface brightness

[math]\frac{Jy}{Sr} = \frac{4\times 10^{23} k T}{\pi D^2 \Omega}[/math], where [math]\Omega[/math] is the beam solid angle. At 110GHz the factor is [math]2x10^8[/math]

now we need to decide if this model data will work at the desired pixel scale

  • the GRS resolution of 40" at ~10kpc is 0.04" at 10Mpc, so we should be able to do a simulation of observing at ~0.1-0.2". Beamsummary.png indicates that for ALMA at 100GHz, configuration 20 is appropriate.
  • if we intend to set cell=0.04arcsec in simdata, then the cube needs to be multiplied by

[math]2x10^8 * (.04/206265)^2 = 7.9x10^{-6}[/math] to obtain Jy/pixel. The cube peaks at ~3K, so we can perform the simulation with inbright=2.3e-5

will we be dominated by the noise in the input model?

  • input noise ~150mK or S/N~20, so at our scaled intensity, a few mJy/bm. The exposure time calculator says that ALMA will achieve 1.3mJy/bm in an hour, so we should set this up as a half hour snapshot.