Simulation Guide for New Users (CASA 3.4): Difference between revisions

From CASA Guides
Jump to navigationJump to search
 
(5 intermediate revisions by one other user not shown)
Line 163: Line 163:
==Using simanalyze==
==Using simanalyze==


Now that simobserve has created a simulated set of visibility measurements, we are ready to image the visibilities and analyze the result.  The task simanalyze has been created to easily perform the imaging and subsequent generation of useful analysis plots and figures.  We begin by resetting the simanalyze inputs to their default values.
Now that simobserve has created a simulated set of visibility measurements, we are ready to image the visibilities and analyze the result.  The task '''simanalyze''' has been created to easily perform the imaging and subsequent generation of useful analysis plots and figures.  We begin by resetting the simanalyze inputs to their default values.


<source lang="python">
<source lang="python">
Line 174: Line 174:
===Image===
===Image===


We want to make a deconvolved output image, but we don't want to spend too much time optimizing the cleaning.  So, all we need to do is make sure the "image" parameter is set to True (which it is by default) and leave all of its sub-parameters at their default values.  Other [http://casaguides.nrao.edu/index.php?title=Main_Page data reduction guides] describe the process of imaging in greater detail.
We want to make a deconvolved output image, but we don't want to spend too much time optimizing the cleaning.  So, all we need to do is make sure the '''image''' parameter is set to True (which it is by default) and leave all of its sub-parameters at their default values.  Other [http://casaguides.nrao.edu/index.php?title=Main_Page data reduction guides] describe the process of imaging in greater detail.


Note that simanalyze is slightly picky about the image size. It does not like the default image size (set equal to the FITS image size) of 251. Set it to 252, which will make simanalyze happy.
Note that simanalyze is slightly picky about the image size. It does not like the default image size (set equal to the FITS image size) of 251. Set it to 252, which will make simanalyze happy.
Line 189: Line 189:
===Analyze===
===Analyze===


To specify how simanalyze displays the imaged data, set the parameter "analyze" to True and then pick your favorite output formats.  If the <tt>graphics</tt> parameter is set to 'screen' or 'both', up to six output formats will be displayed in the CASA plotter.  More than six outputs can be written to disk (<tt>graphics = 'file'</tt> or <tt>'both'</tt>), but only six can be displayed in the plotter.  In this example we will look at,
To specify how simanalyze displays the imaged data, set the parameter '''analyze''' to True and then pick your favorite output formats.  If the '''graphics''' parameter is set to <tt>'screen'</tt> or <tt>'both'</tt>, up to six output formats will be displayed in the CASA plotter.  More than six outputs can be written to disk ('''graphics''' = <tt>'file'</tt> or <tt>'both'</tt>), but only six can be displayed in the plotter.  In this example we will look at,


# the uv coverage in the 2 hour observation,
# the uv coverage in the 2 hour observation,
# the synthesized beam (point spread function),
# the synthesized ("dirty") beam (point spread function),
# the original sky model (as defined in "modifymodel"),
# the original sky model (as defined in "modifymodel"),
# the convolved model (sky model convolved with the synthesized beam),
# the convolved model (sky model convolved with the output "clean" beam),
# the clean image (the sky as observed with the interferometer after deconvolution),  
# the clean image (the sky as observed with the interferometer after deconvolution),  
# and the difference between the clean image and the convolved model.
# and the difference between the clean image and the convolved model.
Line 205: Line 205:
showconvolved = True
showconvolved = True
showfidelity = False
showfidelity = False
imsize = [252,252]
</source>
</source>


Line 225: Line 224:
All CASA images written to disk can be opened later using the CASA viewer.  Just type
All CASA images written to disk can be opened later using the CASA viewer.  Just type
  > viewer
  > viewer
at the CASA prompt to start the viewer tool, and navigate to the appropriate directory, in our case <tt>sim</tt>.  To display the simulated observations, first click on sim.alma.cycle0.compact.image, then click the "raster image" button and then click "done".  The image will be shown in the viewer, and clicking on the picture of the wrench in the upper left corner will allow you to alter the image in many ways, such as changing the color scale, changing the coordinate scale, and axis labels.  The image to the right was created by:
at the CASA prompt to start the viewer tool, and navigate to the appropriate directory, in our case <tt>sim</tt>.  To display the simulated observations, first click on <tt>sim.alma_cycle1_1.image</tt>, then click the "raster image" button and then click "done".  The image will be shown in the viewer, and clicking on the picture of the wrench in the upper left corner will allow you to alter the image in many ways, such as changing the color scale, changing the coordinate scale, and axis labels.  The image to the right was created by:


# changing <tt>basic settings -> color map</tt> from "Rainbow 2" to "Hot Metal 1",
# changing <tt>basic settings -> color map</tt> from "Rainbow 2" to "Hot Metal 1",

Latest revision as of 09:56, 24 October 2012

Simulating Observations in CASA

Explanation of the guide

When planning an interferometric observation it is useful to simulate the output of the instrument under a variety of conditions. In CASA, interferometric observations can be simulated using task simobserve and quickly analyzed using task simanalyze. This guide will demonstrate how to simulate an ALMA observation using these tasks. (Task simobserve can also be used to simulate observations with other interferometers, but this currently requires advanced techniques not covered here.)

We begin with an image similar to something that might be observed with ALMA. We show how to rescale the image and specify the ALMA antenna configuration. We produce a simulated set of visibility measurements and then produce an image from the visibility data. In the process, we also generate useful figures to help us analyze the simulated output.

We will assume throughout only a general knowledge of interferometry and no specific knowledge of CASA.

Getting Started

The two things you need to get started are

  1. The image we will work with, and
  2. CASA version 3.4.

We will use the Spitzer IRAC 8 micron image of 30 Doradus, which you can download from the Simulation Inputs page.

To install CASA, follow the instructions given on the Obtaining CASA page.

CASA Basics

CASA is the post-processing package for ALMA and EVLA and can handle both interferometric and single dish data. Because simobserve and simanalyze are tasks within CASA, we start here with a brief introduction to some CASA basics. To learn much more about CASA, go to the CASA homepage. Walk-throughs of CASA data reduction for a variety of data sets can be found on the CASA Guides website.

Once you have installed CASA, you can launch it by typing "casapy" at the prompt or by double-clicking on the icon, depending on your system and preferences.

Screen shot of inp simobserve. Note that default values are shown in black, valid and non-default values are shown in blue, and invalid values are shown in red. Expandable parameters have a grey background.

To see a list of all available CASA tasks, at the CASA prompt type

tasklist

To look at the inputs for an available task, use "inp". For instance

inp simobserve

Any parameter with a grey background is expandable. Black text shows a default value. Red text shows an invalid value. Blue text shows a valid value different from the default.

To get help on a given task, use "help" (to exit from help, hit the "q" key). For instance

help simanalyze

To reset a task to its default values, use "default". For instance

default simobserve

To run a task using the current global values of its input parameters, just type its name at the CASA prompt. For instance

simobserve

It's a good idea to double-check these values (i.e., re-run inp simobserve) immediately before running a task.

Using simobserve

The task simobserve uses a model image along with a number of input parameters that define the observational conditions and alter the input model. The output of simobserve is a visibility measurement set and various diagnostic plots and images.

Getting Your Input Image Into simobserve

First, we'll tell simobserve where to find the model (input) image and how to scale it appropriately for our purposes. Just to be safe, we'll begin by restoring the default values of simobserve and then set the 30 Doradus image as the skymodel (Note: you might need to include the path to your model image, if you are not currently in the working directory where the image is).

#In CASA
default simobserve
skymodel = '30dor.fits'

Once skymodel is set, command inp reveals sub-parameters that control scaling the model image.

Angular Scale

If you open the FITS image of 30 Doradus in your favorite viewer (e.g. viewer in CASA), you will see that it covers quite a large footprint on the sky, about 10' on a side. We are going to tell simobserve to rescale the pixels to shrink the image by roughly a factor of 15 (from 2.3" to 0.15" pixels through the incell parameter) so that the model is approximately 40" on a side. This rescaled model will fit within a small mosaic of 6 pointings. Although we do this primarily for convenience in this example, a scientific motivation for this type of rescaling would be to approximate what a super-giant HII region like 30 Doradus would look like if moved from the Large Magellanic Cloud to the distance of M33 or M31. For the sake of demonstration, we will also change the coordinates of the center of the map (using the indirection parameter). Units are case sensitive, so please take care to enter them in verbatim. CASA will throw an error otherwise.

#In CASA
incell = '0.15arcsec'
indirection = 'J2000 10h00m00 -40d00m00'

Observed Wavelength

The model image of 30 Doradus shows 8 micron continuum emission. ALMA does not observe at wavelengths this short, so we will tell simobserve that this is actually a 230 GHz (1.3 mm) continuum map. We will also tell simobserve that the observations were taken with a 2-GHz bandwidth. Although for this particular example the channel width is not a critical number, it would be very important if we were modifying a spectral cube instead of a continuum image.

#In CASA
incenter = '230GHz'
inwidth = '2GHz'

Brightness Scale

The 8-micron emission is probably not a great approximation for the millimeter emission from 30 Doradus. For a true science case, one would want to calculate what the expected 230-GHz emission would be from an object like this at the distance of about 750 kiloparsec. For the sake of simplicity, we will rescale the image so that the brightest pixel in the map has a flux density of 0.06 mJy. This number is chosen such that the extended emission is a factor of a few brighter than the expected noise in a 2-hour observation. The ALMA sensitivity calculator can be used to determine the expected noise for an observation.

#In CASA
inbright = '0.06mJy/pixel'

Remember that you can check your task inputs at any time by typing inp at the casa prompt.

Defining the Mock Observations

Now that simobserve knows how to interpret the input image, the next step is to define the simulated observations.

Pointings and Scan Time

We will first change the parameters within setpointings.

The default value for integration, 10 seconds, might be appropriate to simulate real observations. However, simobserve will run much faster if the value for integration is increased, reducing the number of data points to be generated. In this demonstration we will set it to 600 seconds. When simobserve is used for scientific purposes it may be best to set integration to a large value at first to make sure that simobserve runs as expected, and then decrease it to a more realistic time for the final run. You will get a more accurate simulation with 10 second integrations than with 600 second integrations, especially in Early Science observations with a limited number of baselines.

# In CASA
integration = '600s'

Note that the integration time is different than the total (on-source) time of the observations. The integration time, set here, is the averaging time for each data point. The total time spent on-source is set below. Each pair of antennas will generate a number of data points equal to the total observing time divided by the integration time.

We will keep direction at the default (blank) value to center the observations on the model coordinates, as given in indirection above.

We will keep mapsize at the default value so that the mosaic will automatically cover the entire image. In our case, this will require a mosaic of 6 pointings (as we will see later on). One could also set an exact output image size via mapsize = ['10arcmin','10arcmin'] for example.

The default mosaic pattern, maptype = 'ALMA' , tells simobserve to use the same hexagonal algorithm as the ALMA OT. We will leave this unchanged.

Finally, we will also leave pointingspacing to its default value (blank), which automatically sets the pointings to be half a primary beam apart, corresponding to Nyquist sampling.

Antenna Positions and Total Observation Time

We will now consider the subparameters available when observe = 'int' . We will keep the default values for every parameter (including totaltime = 7200s) except antennalist, which tells simobserve the locations and sizes of each antenna in the array. We will simulate an Early Science observation, so we will first find the location where CASA has stored the ALMA configuration files. Then we will tell simobserve to use the configuration file designed for Early Science.

#In CASA
antennalist =  "alma_cycle1_1.cfg"

This command sets the antennalist parameter to one of the Cycle 1 configurations. Other .cfg files in the same directory exist for various ALMA Cycle 1 configurations and Full Science array configurations as well as the configuration files for other radio interferometers.

We will use the default values for all other parameters for this simulation as we are not using a component list to describe the sky emission, we do not want to simulate observations of a calibrator, and we do not want to simulate single dish observations.

Thermal Noise

For this simple simulation, we will not include any thermal noise in the observations, so we can leave thermalnoise at its default (empty string) value.

simobserve Execution and Output

With all the input parameters set, we are ready to execute the task:

#In CASA
simobserve()

All simobserve output will be written to a directory whose name was given by the project parameter, in our case, project = 'sim' . Inside this directory, you will find:

The 2x2 summary plot output by simobserve showing source elevation vs. time, antenna position, uv coverage, and the point spread function.
  1. The simulated measurement set (sim.alma_cycle1_1.ms),
  2. CASA image of the point spread function (sim.alma_cycle1_1.quick.psf),
  3. CASA image of the input sky model rescaled according to the skymodel sub-parameters (sim.alma_cycle1_1.skymodel),
  4. flattened CASA image of the input sky model rescaled (sim.alma_cycle1_1.skymodel.flat),
  5. flattened PNG image of the input sky model rescaled and overlaid with the mosaic pattern specified by the setpointings sub-parameters (sim.alma_cycle1_1.skymodel.png),
  6. a 2x2 PNG summary plot (sim.alma_cycle1_1.observe.png) showing,
    1. source elevation vs. time,
    2. antenna position,
    3. uv coverage,
    4. and the point spread function,
  7. and an ASCII text listing of mosaic pointings (sim.alma_cycle1_1.ptg.txt).

When simobserve is executed, the 2x2 PNG plot will be displayed in the CASA plotter.

Using simanalyze

Now that simobserve has created a simulated set of visibility measurements, we are ready to image the visibilities and analyze the result. The task simanalyze has been created to easily perform the imaging and subsequent generation of useful analysis plots and figures. We begin by resetting the simanalyze inputs to their default values.

#In CASA
default simanalyze

We next setup the imaging and analysis input parameters.

Image

We want to make a deconvolved output image, but we don't want to spend too much time optimizing the cleaning. So, all we need to do is make sure the image parameter is set to True (which it is by default) and leave all of its sub-parameters at their default values. Other data reduction guides describe the process of imaging in greater detail.

Note that simanalyze is slightly picky about the image size. It does not like the default image size (set equal to the FITS image size) of 251. Set it to 252, which will make simanalyze happy.

#In CASA
imsize = 252

For simulations intended for a proposal or scientific analysis, one would almost certainly want to choose a more appropriate cleaning threshold and define the region to be cleaned. Instructions for how to define the region to be cleaned with the "mask" parameter can be found by typing

> help clean

or by looking at the Clean CASA Guide page.

Analyze

To specify how simanalyze displays the imaged data, set the parameter analyze to True and then pick your favorite output formats. If the graphics parameter is set to 'screen' or 'both', up to six output formats will be displayed in the CASA plotter. More than six outputs can be written to disk (graphics = 'file' or 'both'), but only six can be displayed in the plotter. In this example we will look at,

  1. the uv coverage in the 2 hour observation,
  2. the synthesized ("dirty") beam (point spread function),
  3. the original sky model (as defined in "modifymodel"),
  4. the convolved model (sky model convolved with the output "clean" beam),
  5. the clean image (the sky as observed with the interferometer after deconvolution),
  6. and the difference between the clean image and the convolved model.

To make these choices, use the following lines in CASA

#In CASA
analyze = True
showconvolved = True
showfidelity = False

simanalyze Execution and Output

Plot of the six outputs generated by simanalyze.

Execute simanalyze by typing,

#In CASA
simanalyze()

The six outputs we selected will be displayed in the CASA plotter and written to disk in the sim directory.

Screen shot of the 30 Doradus image shown in the CASA viewer.

All CASA images written to disk can be opened later using the CASA viewer. Just type

> viewer

at the CASA prompt to start the viewer tool, and navigate to the appropriate directory, in our case sim. To display the simulated observations, first click on sim.alma_cycle1_1.image, then click the "raster image" button and then click "done". The image will be shown in the viewer, and clicking on the picture of the wrench in the upper left corner will allow you to alter the image in many ways, such as changing the color scale, changing the coordinate scale, and axis labels. The image to the right was created by:

  1. changing basic settings -> color map from "Rainbow 2" to "Hot Metal 1",
  2. changing beam ellipse -> beam style from "outline" to "filled",
  3. and changing color wedge -> display color wedge from "No" to "Yes".

You can learn much more about the functionality of the CASA viewer by watching this instructional video.

Simulating Observations in CASA