Simulation Guide Component Lists (CASA 3.3): Difference between revisions

From CASA Guides
Jump to navigationJump to search
No edit summary
No edit summary
Line 23: Line 23:
Once you have installed CASA, you can launch it by typing "casapy" at the prompt or by double-clicking on the icon, depending on your system and preferences.
Once you have installed CASA, you can launch it by typing "casapy" at the prompt or by double-clicking on the icon, depending on your system and preferences.


==Using the Toolkit==
==Making a Simple FITS Image==


==Using <tt>sim_observe</tt>==
==Simulating Observations with a FITS Image and a Component List==


The task <tt>sim_observe</tt> uses a model image along with a number of input parameters that define the observational conditions and alter the input model.  The output of <tt>sim_observe</tt> is a visibility measurement set and various diagnostic plots and images.
==Simulating Observations with Just a Component List==


===Getting Your Input Image Into <tt>sim_observe</tt>===
First, we'll tell <tt>sim_observe</tt> where to find the model (input) image and how to scale it appropriately for our purposes.  Just to be safe, we'll begin by restoring the default values of <tt>sim_observe</tt> and then set the 30 Doradus image as the skymodel (Note: you might need to include the path to your model image, if you are not currently in the working directory where the image is).
<source lang="python">
#In CASA
default sim_observe
skymodel = '30dor.fits'
</source>
====Angular Scale====
If you open the FITS image of 30 Doradus in your favorite viewer (e.g. <tt>viewer</tt> in CASA), you will see that it covers quite a large footprint on the sky, about 10' on a side. We are going to tell <tt>sim_observe</tt> to rescale the pixels to shrink the image by roughly a factor of 15 (from  2.3" to 0.15" pixels through the <tt>incell</tt> parameter) so that the model is approximately 40" on a side.  This rescaled model will fit within a small mosaic of 6 pointings.  Although we do this primarily for convenience in this example, a scientific motivation for this type of rescaling would be to approximate what a super-giant HII region like 30 Doradus would look like if moved from the Large Magellanic Cloud to the distance of M33 or M31.  For the sake of demonstration, we will also change the coordinates of the center of the map (using the <tt>indirection</tt> parameter). Units are case sensitive, so please take care to enter them in verbatim.  CASA will throw an error otherwise.
<source lang="python">
#In CASA
incell = '0.15arcsec'
indirection = 'J2000 10h00m00 -40d00m00'
</source>
====Observed Wavelength====
The model image of 30 Doradus shows 8 micron continuum emission.  ALMA does not observe at wavelengths this short, so we will tell <tt>sim_observe</tt> that this is actually a 230 GHz (1.3 mm) continuum map.  We will also tell <tt>sim_observe</tt> that the observations were taken with a 2-GHz bandwidth. Although for this particular example the channel width is not a critical number, it would be very important if we were modifying a spectral cube instead of a continuum image.
<source lang="python">
#In CASA
incenter = '230GHz'
inwidth = '2GHz'
</source>
====Brightness Scale====
The 8 micron emission is probably not a great approximation for the millimeter emission from 30 Doradus.  For a true science case, one would want to calculate what the expected 230 GHz emission would be from an object like this at the distance of about 750 kiloparsec.  For the sake of simplicity, we will rescale the image so that the brightest pixel in the map has a flux density of 0.06 mJy.  This number is chosen such that the extended emission is a factor of a few brighter than the expected noise in a 2 hour observation.  The [https://almascience.nrao.edu/call-for-proposals/sensitivity-calculator ALMA sensitivity calculator] can be used to determine the expected noise for an observation.
<source lang="python">
#In CASA
inbright = '0.06mJy/pixel'
</source>
Remember that you can check your task inputs at any time by typing <tt>inp</tt> at the casa prompt.
===Defining the Mock Observations===
Now that <tt>sim_observe</tt> knows how to interpret the input image, the next step is to define the simulated observations. 
====Pointings and Scan Time====
We will first change the parameters within <tt>setpointings</tt>. 
The default value for <tt>integration</tt>, 10 seconds, might be appropriate to simulate real observations.  However, <tt>sim_observe</tt> will run much faster if the value for "integration" is increased, reducing the number of data points to be generated.  In this demonstration we will set it to 600 seconds.  When <tt>sim_observe</tt> is used for scientific purposes it may be best to set <tt>integration</tt> to a large value at first to make sure that <tt>sim_observe</tt> runs as expected, and then decrease <tt>integration</tt> to a more realistic time for the final run.  You will get a more accurate simulation with 10 second integrations than with 600 second integrations, especially in Early Science observations with a limited number of baselines.
<source lang="python">
#In CASA
integration = '600s'
</source>
Note that the integration time is different than the total (on-source) time of the observations.  The integration time, set here, is the averaging time for each data point.  The total time spent on-source is set below.  Each pair of antennas will generate a number of data points equal to the total observing time divided by the integration time.
We will keep <tt>direction</tt> at the default (blank) value to center the observations on the model coordinates, as given in <tt>indirection</tt> above.
We will keep <tt>mapsize</tt> at the default value so that the mosaic will automatically cover the entire image.  In our case, this will require a mosaic of 6 pointings (as we will see later on).  One could also set an exact output image size via <tt>mapsize = ['10arcmin','10arcmin']</tt> for example.
The default mosaic pattern, <tt>maptype = 'ALMA'</tt>, tells <tt>sim_observe</tt> to use the same hexagonal algorithm as the ALMA OT.  We will leave this unchanged.
Finally, we will also leave <tt>pointingspacing</tt> to its default value (blank), which automatically sets the pointings to be half a primary beam apart, corresponding to Nyquist sampling.
====Antenna Positions and Total Observation Time====
We will now consider the subparameters available when <tt>observe = True</tt>.  We will keep the default values for every parameter (including <tt>totaltime = 7200s</tt>) except <tt>antennalist</tt>, which tells <tt>sim_observe</tt> the locations and sizes of each antenna in the array.  We will simulate an Early Science observation, so we will first find the location where CASA has stored the ALMA configuration files.  Then we will tell <tt>sim_observe</tt> to use the configuration file designed for Early Science.
<source lang="python">
#In CASA
repodir = os.getenv("CASAPATH").split(' ')[0]
antennalist =  repodir+"/data/alma/simmos/alma.cycle0.compact.cfg"
</source>
The first line, run within CASA, uses a Linux command to determine the path for CASA.  The second line sets the <tt>antennalist</tt> parameter to the Early Science configuration.  Other <tt>.cfg</tt> files in the same directory exist for various ALMA Full Science array configurations as well as the configuration files for other radio interferometers.
Most of the other parameters are not relevant for this simulation as we are not using a component list to describe the sky emission, we do not want to simulate observations of a calibrator, and we do not want to simulate single dish observations.  Note that at this stage of simulation development, the time portion of the <tt>refdate</tt> parameter is ignored and all observations are instead centered around transit on the date specified.
====Thermal Noise====
For this simple simulation, we will not include any thermal noise in the observations, so we can leave <tt>thermalnoise</tt> at its default (blank) value.
===<tt>sim_observe</tt> Execution and Output===
With all the input parameters set, we are ready to execute the task:
<source lang="python">
#In CASA
sim_observe()
</source>
All <tt>sim_observe</tt> output will be written to a directory whose name was given by the <tt>project</tt> parameter, in our case, <tt>project = 'sim'</tt>.  Inside this directory, you will find
[[File:Sim.observe.png|thumb|right|The 2x2 summary plot output by <tt>sim_observe</tt> showing source elevation vs. time, antenna position, uv coverage, and the point spread function.]]
# The simulated measurement set (<tt>sim.ms</tt>),
# a CASA image of the point spread function (<tt>sim.quick.psf</tt>),
# a CASA image of the input sky model rescaled according to the <tt>skymodel</tt> sub-parameters (<tt>sim.skymodel</tt>),
# a flattened CASA image of the input sky model rescaled (<tt>sim.skymodel.flat</tt>),
# a flattened PNG image of the input sky model rescaled and overlaid with the mosaic pattern specified by the <tt>setpointings</tt> sub-parameters (<tt>sim.skymodel.png</tt>),
# a 2x2 PNG summary plot (<tt>sim.observe.png</tt>) showing,
## source elevation vs. time,
## antenna position,
## uv coverage,
## and the point spread function,
# and an ASCII text listing of mosaic pointings.
When <tt>sim_observe</tt> is executed, the 2x2 PNG plot will be displayed in the CASA plotter.
==Using <tt>sim_analyze</tt>==
Now that <tt>sim_observe</tt> has created a simulated set of visibility measurements, we are ready to image the visibilities and analyze the result.  The task <tt>sim_analyze</tt> has been created to easily perform the imaging and subsequent generation of useful analysis plots and figures.  We begin by resetting the <tt>sim_analyze</tt> inputs to their default values.
<source lang="python">
#In CASA
default sim_analyze
</source>
We next setup the imaging and analysis input parameters.
===Image===
We want to make a deconvolved output image, but we don't want to spend too much time optimizing the cleaning.  So, all we need to do is make sure the "image" parameter is set to True (which it is by default) and leave all of its sub-parameters at their default values.  Other [http://casaguides.nrao.edu/index.php?title=Main_Page data reduction guides] describe the process of imaging in greater detail.
For simulations intended for a proposal or scientific analysis, one would almost certainly want to choose a more appropriate cleaning threshold and define the region to be cleaned.  Instructions for how to define the region to be cleaned with the "mask" parameter can be found by typing
> help clean
or by looking at the [http://casaguides.nrao.edu/index.php?title=Clean Clean CASA Guide page].
===Analyze===
To specify how <tt>sim_analyze</tt> displays the imaged data, set the parameter "analyze" to True and then pick your favorite output formats.  If the <tt>graphics</tt> parameter is set to 'screen' or 'both', up to six output formats will be displayed in the CASA plotter.  More than six outputs can be written to disk (<tt>graphics = 'file'</tt> or <tt>'both'</tt>), but only six can be displayed in the plotter.  In this example we will look at,
# the uv coverage in the 2 hour observation,
# the synthesized beam (point spread function),
# the original sky model (as defined in "modifymodel"),
# the convolved model (sky model convolved with the synthesized beam),
# the clean image (the sky as observed with the interferometer after deconvolution),
# and the difference between the clean image and the convolved model.
To make these choices, use the following lines in CASA
<source lang="python">
#In CASA
analyze = True
showconvolved = True
showfidelity = False
</source>
===<tt>sim_analyze</tt> Execution and Output===
[[File:Sim.analysis 2.png|thumb|right| Plot of the six outputs generated by <tt>sim_analyze</tt>.]]
Execute <tt>sim_analyze</tt> by typing,
<source lang="python">
#In CASA
sim_analyze()
</source>
The six outputs we selected will be displayed in the CASA plotter and written to disk in the <tt>sim</tt> directory. 
[[File:30Doradus.sim.image.png|thumb|right| Screen shot of the 30 Doradus image shown in the CASA viewer.]]
All CASA images written to disk can be opened later using the CASA viewer.  Just type
> viewer
at the CASA prompt to start the viewer tool, and navigate to the appropriate directory, in our case <tt>sim</tt>.  To display the simulated observations, first click on sim.image, then click the "raster image" button and then click "done".  The image will be shown in the viewer, and clicking on the picture of the wrench in the upper left corner will allow you to alter the image in many ways, such as changing the color scale, changing the coordinate scale, and axis labels.  The image to the right was created by:
# changing <tt>basic settings -> color map</tt> from "Rainbow 2" to "Hot Metal 1",
# changing <tt>beam ellipse -> beam style</tt> from "outline" to "filled",
# and changing <tt>color wedge -> display color wedge</tt> from "No" to "Yes".
You can learn much more about the functionality of the CASA viewer by watching this [http://casa.nrao.edu/CasaViewerDemo/casaViewerDemo.html instructional video].


{{Simulations Intro}}
{{Simulations Intro}}


[[Category: Simulations]] [[Category:ALMA]]
[[Category: Simulations]] [[Category:ALMA]]

Revision as of 10:11, 25 October 2011

Simulating Observations in CASA

This guide is applicable to CASA version 3.3.

To create a script of the Python code on this page see Extracting scripts from these tutorials.

Explanation of the guide

When planning an interferometric observation it is often useful to simulate observations of very simple objects, like point sources, Gaussians, and disks. In CASA, observations can be simulated using task sim_observe and analyzed using task sim_analyze. This guide will demonstrate how to simulate an ALMA observations of a Gaussian and some point sources using these tasks as well as the CASA Toolkit.

We begin by using component lists in the Toolkit to create an image of a Gaussian flux distribution, and this will be saved as a FITS file. The fits file will them be "observed" using sim_observe and sim_analyze along with four point sources, added via the componentlist parameter. Finally, we show how the same observations could have been done without any skymodel in sim_observe, instead using only component lists.

Getting Started

To get started you need CASA version 3.3

To install CASA, follow the instructions given on the Obtaining CASA page.

CASA Basics

CASA is the post-processing package for ALMA and EVLA and can handle both interferometric and single dish data. To get a brief introduction to sim_observe and sim_analyze, the tasks within CASA that we will use here, go to Simulation Guide for New Users. To learn more about CASA in general, go to the CASA homepage. Walk-throughs of CASA data reduction for a variety of data sets can be found on the CASA Guides website.

Once you have installed CASA, you can launch it by typing "casapy" at the prompt or by double-clicking on the icon, depending on your system and preferences.

Making a Simple FITS Image

Simulating Observations with a FITS Image and a Component List

Simulating Observations with Just a Component List

Simulating Observations in CASA