EVLA Continuum Tutorial 3C391: Difference between revisions

From CASA Guides
Jump to navigationJump to search
Line 616: Line 616:
<source lang="python">
<source lang="python">
# In CASA
# In CASA
applycal(vis='3c391_ctm_mosaic_10s.ms',
applycal(vis='3c391_ctm_mosaic_10s_spw0.ms',
     gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
     gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
     parang=True,field='J1331+3030',gainfield=['J1331+3030','','',''],interp=['nearest','','',''])
     parang=True,field='J1331+3030',gainfield=['J1331+3030','','',''],interp=['nearest','','',''])


applycal(vis='3c391_ctm_mosaic_10s.ms',
applycal(vis='3c391_ctm_mosaic_10s_spw0.ms',
     gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
     gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
     parang=True,field='J0319+4130',gainfield=['J0319+4130','','',''],interp=['nearest','','',''])
     parang=True,field='J0319+4130',gainfield=['J0319+4130','','',''],interp=['nearest','','',''])


applycal(vis='3c391_ctm_mosaic_10s.ms',
applycal(vis='3c391_ctm_mosaic_10s_spw0.ms',
     gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
     gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
     parang=True,field='J1822-0938',gainfield=['J1822-0938','','',''],interp=['nearest','','',''])
     parang=True,field='J1822-0938',gainfield=['J1822-0938','','',''],interp=['nearest','','',''])
</source>
</source>


* gaintable : We provide a Python list of the calibration tables to be applied.  This must contain our properly-scaled gain calibration for the amplitudes and phases (in 3c391_ctm_mosaic.fluxscale1) which we just made using [[fluxscale]], our bandpass solutions (in 3c391_ctm_mosaic.bcal0), our leakage calibration (in 3c391_ctm_mosaic.pcal0) and the R-L phase corrections (in 3c391_ctm_mosaic.xcal0).  While the latter three tables were derived using a particular calibrator source, the table containing the gain solutions for amplitude and phase was derived separately for each individual calibrator.
* gaintable : We provide a Python list of the calibration tables to be applied.  This must contain our properly-scaled gain calibration for the amplitudes and phases (in 3c391_ctm_mosaic.fluxscale1) which we just made using [[fluxscale]], our bandpass solutions (in 3c391_ctm_mosaic.bcal0), our leakage calibration (in 3c391_ctm_mosaic.pcal0) and the R-L phase corrections (in 3c391_ctm_mosaic.xcal0).  While the latter three tables were derived using a particular calibrator source, the table containing the gain solutions for amplitude and phase was derived separately for each individual calibrator.
* gainfield, interp : To ensure that we use the correct gain amplitudes and phases for a given calibrator (those derived on that same calibrator), then for each calibrator source, we need to specify the particular subset of gain solutions to be applied. This requires use of the ''gainfield'' and ''interp'' arguments; these are both Python lists, and for the list item corresponding to the calibration table made by [[fluxscale]], we set ''gainfield'' to the field name corresponding to that calibrator, and the desired interpolation type (''interp'') to ''nearest''.
* gainfield, interp : To ensure that we use the correct gain amplitudes and phases for a given calibrator (those derived on that same calibrator), then for each calibrator source, we need to specify the particular subset of gain solutions to be applied. This requires use of the ''gainfield'' and ''interp'' arguments; these are both Python lists, and for the list item corresponding to the calibration table made by [[fluxscale]], we set ''gainfield'' to the field name corresponding to that calibrator, and the desired interpolation type (''interp'') to ''nearest''.
* parang : Since we have performed polarization calibration, we '''must''' set ''parang=True'', or we will discard all that hard work we did earlier.
* parang : Since we have performed polarization calibration, we '''must''' set ''parang=True'', or we will discard all that hard work we did earlier.

Revision as of 19:30, 10 May 2010


This tutorial is under construction. There are several things still to be added 
in addition to overall polish and further annotation:
* screen captures of task inputs
* self-calibration and further imaging
* image analysis
* construction of polarization images

Overview

This article describes the calibration and imaging of a multiple-pointing EVLA continuum dataset on the supernova remnant 3C 391. The data were taken in OSRO1 mode, with 128 MHz of bandwidth in each of two widely spaced spectral windows, centered at 4.6 and 7.5 GHz, and were set up for full polarization calibration. To generate the full data reduction script described here, use the script extractor.

Obtaining the Data

For the purposes of this tutorial, we have created a "starting" data set, upon which several initial processing steps have already been conducted. This data set may already be present on the machine that you are using; if not, obtain it from the CASA data archive.

We are providing this "starting" data set, rather than the "true" initial data set for (at least) two reasons. First, many of these initial processing steps can be rather time consuming (> 1 hr), and the time for the data reduction tutorial is limited. Second, while necessary, many of these steps are not fundamental to the calibration and imaging process, upon which we want to focus today. For completeness, however, here are the steps that were taken from the initial data set to produce the "starting" data set:

  • The data loaded into CASA, converting the initial ALMA Science Data Model (ASDM) file into a measurement set.
  • Basic data flagging was applied, to account for "shadowing" of the antennas. These data are from the D configuration, and antennas can block or "shadow" other antennas in the array, depending upon the elevation of the source.
  • The data were averaged to 10-second samples, from the initial 1-second correlator sample time. In the D configuration, the fringe rate is relatively slow and time-average smearing is less of a concern.
  • The data were acquired with two spectral windows (around 4.6 and 7.5 GHz). Because of disk space concerns on some machines, the focus will be on only one of the two spectral windows.

We emphasize that, were this a real science observation, all of these steps would need to be run.

Examining the Data

Before starting the calibration process, we want to get some basic information about the data set. To examine the observing conditions during the observing run, and to find out any known problems with the data, download the observer log. Simply fill in the known observing date (in our case 2010-Apr-24) as both the Start and Stop date, and click on the "Show Logs" button. The relevant log is labeled with the project code, TDEM0001, and can be downloaded as a PDF file. From this, we find the following:

Information from observing log:
There is no C-band receivers on ea13
Antenna ea06 is out of the array
Antenna ea12 is newly back
Antenna ea15 has some corrupted data
Antennas ea10, ea12, ea22 do not have good baseline positions
Gusty winds, mixed clouds, API rms up to 11.5.

To get a listing of the individual scans comprising the observation, the frequency setup, source list, and antenna locations, use the task listobs.

# In CASA
listobs(vis='3c391_ctm_mosaic_10s_spw0.ms',verbose=T)

listobs should now produce the following output in the casa logger:

INFO	listobs::::casa	##########################################
INFO	listobs::::casa	##### Begin Task: listobs            #####
INFO	listobs::::casa	
INFO	listobs::ms::summary	================================================================================
INFO	listobs::ms::summary+	           MeasurementSet Name:  /export/home/hamal/jmiller/TDEM0001_sb1218006/3c391_mosaic_fullres.ms      MS Version 2
INFO	listobs::ms::summary+	================================================================================
INFO	listobs::ms::summary+	   Observer: Dr. James Miller-Jones     Project: T.B.D.  
INFO	listobs::ms::summary+	Observation: EVLA
INFO	listobs::ms::summary	Data records: 18666050       Total integration time = 28716 seconds
INFO	listobs::ms::summary+	   Observed from   24-Apr-2010/08:01:34.5   to   24-Apr-2010/16:00:10.5 (UTC)
INFO	listobs::ms::summary	
INFO	listobs::ms::summary+	   ObservationID = 0         ArrayID = 0
INFO	listobs::ms::summary+	  Date        Timerange (UTC)          Scan  FldId FieldName    nVis   Int(s)   SpwIds
INFO	listobs::ms::summary+	  24-Apr-2010/08:01:34.5 - 08:02:28.5     1      0 J1331+3030   35750  1        [0, 1]
INFO	listobs::ms::summary+	              08:02:29.5 - 08:09:27.5     2      0 J1331+3030   272350 1        [0, 1]
INFO	listobs::ms::summary+	              08:09:28.5 - 08:16:26.5     3      0 J1331+3030   272350 1        [0, 1]
INFO	listobs::ms::summary+	              08:16:27.5 - 08:24:25.5     4      1 J1822-0938   311350 1        [0, 1]
INFO	listobs::ms::summary+	              08:24:26.5 - 08:29:44.5     5      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              08:29:45.5 - 08:34:43.5     6      3 3C391 C2     194350 1        [0, 1]
INFO	listobs::ms::summary+	              08:34:44.5 - 08:39:42.5     7      4 3C391 C3     194350 1        [0, 1]
INFO	listobs::ms::summary+	              08:39:43.5 - 08:44:41.5     8      5 3C391 C4     194350 1        [0, 1]
INFO	listobs::ms::summary+	              08:44:42.5 - 08:49:40.5     9      6 3C391 C5     194350 1        [0, 1]
INFO	listobs::ms::summary+	              08:49:41.5 - 08:54:40.5    10      7 3C391 C6     195000 1        [0, 1]
INFO	listobs::ms::summary+	              08:54:41.5 - 08:59:39.5    11      8 3C391 C7     194350 1        [0, 1]
INFO	listobs::ms::summary+	              08:59:40.5 - 09:01:29.5    12      1 J1822-0938   71500  1        [0, 1]
INFO	listobs::ms::summary+	              09:01:30.5 - 09:06:48.5    13      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              09:06:49.5 - 09:11:47.5    14      3 3C391 C2     194350 1        [0, 1]
INFO	listobs::ms::summary+	              09:11:48.5 - 09:16:46.5    15      4 3C391 C3     194350 1        [0, 1]
INFO	listobs::ms::summary+	              09:16:47.5 - 09:21:45.5    16      5 3C391 C4     194350 1        [0, 1]
INFO	listobs::ms::summary+	              09:21:46.5 - 09:26:44.5    17      6 3C391 C5     194350 1        [0, 1]
INFO	listobs::ms::summary+	              09:26:45.5 - 09:31:44.5    18      7 3C391 C6     195000 1        [0, 1]
INFO	listobs::ms::summary+	              09:31:45.5 - 09:36:43.5    19      8 3C391 C7     194350 1        [0, 1]
INFO	listobs::ms::summary+	              09:36:44.5 - 09:38:32.5    20      1 J1822-0938   70850  1        [0, 1]
INFO	listobs::ms::summary+	              09:38:33.5 - 09:43:52.5    21      2 3C391 C1     208000 1        [0, 1]
INFO	listobs::ms::summary+	              09:43:53.5 - 09:48:51.5    22      3 3C391 C2     194350 1        [0, 1]
INFO	listobs::ms::summary+	              09:48:52.5 - 09:53:50.5    23      4 3C391 C3     194350 1        [0, 1]
INFO	listobs::ms::summary+	              09:53:51.5 - 09:58:49.5    24      5 3C391 C4     194350 1        [0, 1]
INFO	listobs::ms::summary+	              09:58:50.5 - 10:03:48.5    25      6 3C391 C5     194350 1        [0, 1]
INFO	listobs::ms::summary+	              10:03:49.5 - 10:08:47.5    26      7 3C391 C6     194350 1        [0, 1]
INFO	listobs::ms::summary+	              10:08:48.5 - 10:13:47.5    27      8 3C391 C7     195000 1        [0, 1]
INFO	listobs::ms::summary+	              10:13:48.5 - 10:15:36.5    28      1 J1822-0938   70850  1        [0, 1]
INFO	listobs::ms::summary+	              10:15:37.5 - 10:20:55.5    29      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              10:20:56.5 - 10:25:55.5    30      3 3C391 C2     195000 1        [0, 1]
INFO	listobs::ms::summary+	              10:25:56.5 - 10:30:54.5    31      4 3C391 C3     194350 1        [0, 1]
INFO	listobs::ms::summary+	              10:30:55.5 - 10:35:53.5    32      5 3C391 C4     194350 1        [0, 1]
INFO	listobs::ms::summary+	              10:35:54.5 - 10:40:52.5    33      6 3C391 C5     194350 1        [0, 1]
INFO	listobs::ms::summary+	              10:40:53.5 - 10:45:51.5    34      7 3C391 C6     194350 1        [0, 1]
INFO	listobs::ms::summary+	              10:45:52.5 - 10:50:51.5    35      8 3C391 C7     195000 1        [0, 1]
INFO	listobs::ms::summary+	              10:50:52.5 - 10:52:40.5    36      1 J1822-0938   70850  1        [0, 1]
INFO	listobs::ms::summary+	              10:52:41.5 - 10:57:39.5    37      0 J1331+3030   194350 1        [0, 1]
INFO	listobs::ms::summary+	              10:57:40.5 - 11:02:39.5    38      1 J1822-0938   195000 1        [0, 1]
INFO	listobs::ms::summary+	              11:02:40.5 - 11:07:58.5    39      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              11:07:59.5 - 11:12:47.5    40      3 3C391 C2     187850 1        [0, 1]
INFO	listobs::ms::summary+	              11:12:48.5 - 11:17:36.5    41      4 3C391 C3     187850 1        [0, 1]
INFO	listobs::ms::summary+	              11:17:37.5 - 11:22:25.5    42      5 3C391 C4     187850 1        [0, 1]
INFO	listobs::ms::summary+	              11:22:26.5 - 11:27:15.5    43      6 3C391 C5     188500 1        [0, 1]
INFO	listobs::ms::summary+	              11:27:16.5 - 11:32:04.5    44      7 3C391 C6     187850 1        [0, 1]
INFO	listobs::ms::summary+	              11:32:05.5 - 11:36:53.5    45      8 3C391 C7     187850 1        [0, 1]
INFO	listobs::ms::summary+	              11:36:54.5 - 11:38:43.5    46      1 J1822-0938   71500  1        [0, 1]
INFO	listobs::ms::summary+	              11:38:44.5 - 11:44:02.5    47      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              11:44:03.5 - 11:48:51.5    48      3 3C391 C2     187850 1        [0, 1]
INFO	listobs::ms::summary+	              11:48:52.5 - 11:53:40.5    49      4 3C391 C3     187850 1        [0, 1]
INFO	listobs::ms::summary+	              11:53:41.5 - 11:58:29.5    50      5 3C391 C4     187850 1        [0, 1]
INFO	listobs::ms::summary+	              11:58:30.5 - 12:03:19.5    51      6 3C391 C5     188500 1        [0, 1]
INFO	listobs::ms::summary+	              12:03:20.5 - 12:08:08.5    52      7 3C391 C6     187850 1        [0, 1]
INFO	listobs::ms::summary+	              12:08:09.5 - 12:12:57.5    53      8 3C391 C7     187850 1        [0, 1]
INFO	listobs::ms::summary+	              12:12:58.5 - 12:14:47.5    54      1 J1822-0938   71500  1        [0, 1]
INFO	listobs::ms::summary+	              12:14:48.5 - 12:20:06.5    55      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              12:20:07.5 - 12:24:55.5    56      3 3C391 C2     187850 1        [0, 1]
INFO	listobs::ms::summary+	              12:24:56.5 - 12:29:44.5    57      4 3C391 C3     187850 1        [0, 1]
INFO	listobs::ms::summary+	              12:29:45.5 - 12:34:34.5    58      5 3C391 C4     188500 1        [0, 1]
INFO	listobs::ms::summary+	              12:34:35.5 - 12:39:23.5    59      6 3C391 C5     187850 1        [0, 1]
INFO	listobs::ms::summary+	              12:39:24.5 - 12:44:12.5    60      7 3C391 C6     187850 1        [0, 1]
INFO	listobs::ms::summary+	              12:44:13.5 - 12:49:01.5    61      8 3C391 C7     187850 1        [0, 1]
INFO	listobs::ms::summary+	              12:49:02.5 - 12:50:51.5    62      1 J1822-0938   71500  1        [0, 1]
INFO	listobs::ms::summary+	              12:50:52.5 - 12:56:10.5    63      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              12:56:11.5 - 13:00:59.5    64      3 3C391 C2     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:01:00.5 - 13:05:48.5    65      4 3C391 C3     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:05:49.5 - 13:10:38.5    66      5 3C391 C4     188500 1        [0, 1]
INFO	listobs::ms::summary+	              13:10:39.5 - 13:15:27.5    67      6 3C391 C5     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:15:28.5 - 13:20:16.5    68      7 3C391 C6     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:20:17.5 - 13:25:05.5    69      8 3C391 C7     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:25:06.5 - 13:26:55.5    70      1 J1822-0938   71500  1        [0, 1]
INFO	listobs::ms::summary+	              13:26:56.5 - 13:32:14.5    71      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              13:32:15.5 - 13:37:03.5    72      3 3C391 C2     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:37:04.5 - 13:41:52.5    73      4 3C391 C3     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:41:53.5 - 13:46:42.5    74      5 3C391 C4     188500 1        [0, 1]
INFO	listobs::ms::summary+	              13:46:43.5 - 13:51:31.5    75      6 3C391 C5     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:51:32.5 - 13:56:20.5    76      7 3C391 C6     187850 1        [0, 1]
INFO	listobs::ms::summary+	              13:56:21.5 - 14:01:09.5    77      8 3C391 C7     187850 1        [0, 1]
INFO	listobs::ms::summary+	              14:01:10.5 - 14:02:59.5    78      1 J1822-0938   71500  1        [0, 1]
INFO	listobs::ms::summary+	              14:03:00.5 - 14:08:18.5    79      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              14:08:19.5 - 14:13:07.5    80      3 3C391 C2     187850 1        [0, 1]
INFO	listobs::ms::summary+	              14:13:08.5 - 14:17:57.5    81      4 3C391 C3     188500 1        [0, 1]
INFO	listobs::ms::summary+	              14:17:58.5 - 14:22:46.5    82      5 3C391 C4     187850 1        [0, 1]
INFO	listobs::ms::summary+	              14:22:47.5 - 14:27:35.5    83      6 3C391 C5     187850 1        [0, 1]
INFO	listobs::ms::summary+	              14:27:36.5 - 14:32:24.5    84      7 3C391 C6     187850 1        [0, 1]
INFO	listobs::ms::summary+	              14:32:25.5 - 14:37:13.5    85      8 3C391 C7     187850 1        [0, 1]
INFO	listobs::ms::summary+	              14:37:14.5 - 14:39:03.5    86      1 J1822-0938   71500  1        [0, 1]
INFO	listobs::ms::summary+	              14:39:04.5 - 14:44:22.5    87      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              14:44:23.5 - 14:49:11.5    88      3 3C391 C2     187850 1        [0, 1]
INFO	listobs::ms::summary+	              14:49:12.5 - 14:54:01.5    89      4 3C391 C3     188500 1        [0, 1]
INFO	listobs::ms::summary+	              14:54:02.5 - 14:58:50.5    90      5 3C391 C4     187850 1        [0, 1]
INFO	listobs::ms::summary+	              14:58:51.5 - 15:03:39.5    91      6 3C391 C5     187850 1        [0, 1]
INFO	listobs::ms::summary+	              15:03:40.5 - 15:08:28.5    92      7 3C391 C6     187850 1        [0, 1]
INFO	listobs::ms::summary+	              15:08:29.5 - 15:13:17.5    93      8 3C391 C7     187850 1        [0, 1]
INFO	listobs::ms::summary+	              15:13:18.5 - 15:15:07.5    94      1 J1822-0938   71500  1        [0, 1]
INFO	listobs::ms::summary+	              15:15:08.5 - 15:20:26.5    95      2 3C391 C1     207350 1        [0, 1]
INFO	listobs::ms::summary+	              15:20:27.5 - 15:25:15.5    96      3 3C391 C2     187850 1        [0, 1]
INFO	listobs::ms::summary+	              15:25:16.5 - 15:30:05.5    97      4 3C391 C3     188500 1        [0, 1]
INFO	listobs::ms::summary+	              15:30:06.5 - 15:34:54.5    98      5 3C391 C4     187850 1        [0, 1]
INFO	listobs::ms::summary+	              15:34:55.5 - 15:39:43.5    99      6 3C391 C5     187850 1        [0, 1]
INFO	listobs::ms::summary+	              15:39:44.5 - 15:44:32.5   100      7 3C391 C6     187850 1        [0, 1]
INFO	listobs::ms::summary+	              15:44:33.5 - 15:49:22.5   101      8 3C391 C7     188500 1        [0, 1]
INFO	listobs::ms::summary+	              15:49:23.5 - 15:51:11.5   102      1 J1822-0938   70850  1        [0, 1]
INFO	listobs::ms::summary+	              15:51:12.5 - 16:00:10.5   103      9 J0319+4130   350350 1        [0, 1]
INFO	listobs::ms::summary	           (nVis = Total number of time/baseline visibilities per scan) 
INFO	listobs::ms::summary	Fields: 10
INFO	listobs::ms::summary+	  ID   Code Name         RA            Decl           Epoch   SrcId nVis   
INFO	listobs::ms::summary+	  0    N    J1331+3030   13:31:08.2880 +30.30.32.9589 J2000   0     774800 
INFO	listobs::ms::summary+	  1    J    J1822-0938   18:22:28.7042 -09.38.56.8350 J2000   1     1361750
INFO	listobs::ms::summary+	  2    NONE 3C391 C1     18:49:24.2440 -00.55.40.5800 J2000   2     2488850
INFO	listobs::ms::summary+	  3    NONE 3C391 C2     18:49:29.1490 -00.57.48.0000 J2000   3     2280850
INFO	listobs::ms::summary+	  4    NONE 3C391 C3     18:49:19.3390 -00.57.48.0000 J2000   4     2282150
INFO	listobs::ms::summary+	  5    NONE 3C391 C4     18:49:14.4340 -00.55.40.5800 J2000   5     2282150
INFO	listobs::ms::summary+	  6    NONE 3C391 C5     18:49:19.3390 -00.53.33.1600 J2000   6     2281500
INFO	listobs::ms::summary+	  7    NONE 3C391 C6     18:49:29.1490 -00.53.33.1600 J2000   7     2281500
INFO	listobs::ms::summary+	  8    NONE 3C391 C7     18:49:34.0540 -00.55.40.5800 J2000   8     2282150
INFO	listobs::ms::summary+	  9    Z    J0319+4130   03:19:48.1601 +41.30.42.1030 J2000   9     350350 
INFO	listobs::ms::summary+	   (nVis = Total number of time/baseline visibilities per field) 
INFO	listobs::ms::summary	Spectral Windows:  (2 unique spectral windows and 1 unique polarization setups)
INFO	listobs::ms::summary+	  SpwID  #Chans Frame Ch1(MHz)    ChanWid(kHz)TotBW(kHz)  Ref(MHz)    Corrs           
INFO	listobs::ms::summary+	  0          64 TOPO  4536        2000        128000      4536        RR  RL  LR  LL  
INFO	listobs::ms::summary+	  1          64 TOPO  7436        2000        128000      7436        RR  RL  LR  LL  
INFO	listobs::ms::summary	Sources: 20
INFO	listobs::ms::summary+	  ID   Name         SpwId RestFreq(MHz)  SysVel(km/s) 
INFO	listobs::ms::summary+	  0    J1331+3030   0     -              -            
INFO	listobs::ms::summary+	  0    J1331+3030   1     -              -            
INFO	listobs::ms::summary+	  1    J1822-0938   0     -              -            
INFO	listobs::ms::summary+	  1    J1822-0938   1     -              -            
INFO	listobs::ms::summary+	  2    3C391 C1     0     -              -            
INFO	listobs::ms::summary+	  2    3C391 C1     1     -              -            
INFO	listobs::ms::summary+	  3    3C391 C2     0     -              -            
INFO	listobs::ms::summary+	  3    3C391 C2     1     -              -            
INFO	listobs::ms::summary+	  4    3C391 C3     0     -              -            
INFO	listobs::ms::summary+	  4    3C391 C3     1     -              -            
INFO	listobs::ms::summary+	  5    3C391 C4     0     -              -            
INFO	listobs::ms::summary+	  5    3C391 C4     1     -              -            
INFO	listobs::ms::summary+	  6    3C391 C5     0     -              -            
INFO	listobs::ms::summary+	  6    3C391 C5     1     -              -            
INFO	listobs::ms::summary+	  7    3C391 C6     0     -              -            
INFO	listobs::ms::summary+	  7    3C391 C6     1     -              -            
INFO	listobs::ms::summary+	  8    3C391 C7     0     -              -            
INFO	listobs::ms::summary+	  8    3C391 C7     1     -              -            
INFO	listobs::ms::summary+	  9    J0319+4130   0     -              -            
INFO	listobs::ms::summary+	  9    J0319+4130   1     -              -            
INFO	listobs::ms::summary	Antennas: 26:
INFO	listobs::ms::summary+	  ID   Name  Station   Diam.    Long.         Lat.         
INFO	listobs::ms::summary+	  0    ea01  W09       25.0 m   -107.37.25.2  +33.53.51.0  
INFO	listobs::ms::summary+	  1    ea02  E02       25.0 m   -107.37.04.4  +33.54.01.1  
INFO	listobs::ms::summary+	  2    ea03  E09       25.0 m   -107.36.45.1  +33.53.53.6  
INFO	listobs::ms::summary+	  3    ea04  W01       25.0 m   -107.37.05.9  +33.54.00.5  
INFO	listobs::ms::summary+	  4    ea05  W08       25.0 m   -107.37.21.6  +33.53.53.0  
INFO	listobs::ms::summary+	  5    ea07  N06       25.0 m   -107.37.06.9  +33.54.10.3  
INFO	listobs::ms::summary+	  6    ea08  N01       25.0 m   -107.37.06.0  +33.54.01.8  
INFO	listobs::ms::summary+	  7    ea09  E06       25.0 m   -107.36.55.6  +33.53.57.7  
INFO	listobs::ms::summary+	  8    ea11  E04       25.0 m   -107.37.00.8  +33.53.59.7  
INFO	listobs::ms::summary+	  9    ea12  E08       25.0 m   -107.36.48.9  +33.53.55.1  
INFO	listobs::ms::summary+	  10   ea13  N07       25.0 m   -107.37.07.2  +33.54.12.9  
INFO	listobs::ms::summary+	  11   ea14  E05       25.0 m   -107.36.58.4  +33.53.58.8  
INFO	listobs::ms::summary+	  12   ea15  W06       25.0 m   -107.37.15.6  +33.53.56.4  
INFO	listobs::ms::summary+	  13   ea16  W02       25.0 m   -107.37.07.5  +33.54.00.9  
INFO	listobs::ms::summary+	  14   ea17  W07       25.0 m   -107.37.18.4  +33.53.54.8  
INFO	listobs::ms::summary+	  15   ea18  N09       25.0 m   -107.37.07.8  +33.54.19.0  
INFO	listobs::ms::summary+	  16   ea19  W04       25.0 m   -107.37.10.8  +33.53.59.1  
INFO	listobs::ms::summary+	  17   ea20  N05       25.0 m   -107.37.06.7  +33.54.08.0  
INFO	listobs::ms::summary+	  18   ea21  E01       25.0 m   -107.37.05.7  +33.53.59.2  
INFO	listobs::ms::summary+	  19   ea22  N04       25.0 m   -107.37.06.5  +33.54.06.1  
INFO	listobs::ms::summary+	  20   ea23  E07       25.0 m   -107.36.52.4  +33.53.56.5  
INFO	listobs::ms::summary+	  21   ea24  W05       25.0 m   -107.37.13.0  +33.53.57.8  
INFO	listobs::ms::summary+	  22   ea25  N02       25.0 m   -107.37.06.2  +33.54.03.5  
INFO	listobs::ms::summary+	  23   ea26  W03       25.0 m   -107.37.08.9  +33.54.00.1  
INFO	listobs::ms::summary+	  24   ea27  E03       25.0 m   -107.37.02.8  +33.54.00.5  
INFO	listobs::ms::summary+	  25   ea28  N08       25.0 m   -107.37.07.5  +33.54.15.8  
INFO	listobs::::casa	
INFO	listobs::::casa	##### End Task: listobs              #####
INFO	listobs::::casa	##########################################

Both to get a sense of the array, as well as identify an antenna for later use in calibration, use the task plotants. In general, for calibration purposes, one would like to select an antenna that is close to the center of the array (and that is not listed in the operator's log as having had problems!).

# In CASA
plotants(vis='3c391_ctm_mosaic_10s_spw0.ms',figfile='3c391_ctm_mosaic_antenna_layout.png')
plotants parameters
plotants figure

Examining and Editing the Data

It is always a good idea, particularly with a new system like the EVLA, to examine the data. Moreover, from the observer's log, we already know that one antenna will need to be flagged because it does not have a C-band receiver. Start by flagging data known to be bad, then examine the data.

In its current operation, it is common to insert a dummy scan as the first scan. (From the listobs output above, one may have noticed that the first scan is less than 1 minute long.) This first scan can safely be deleted.

# In CASA
flagdata(vis='3c391_ctm_mosaic_10s_spw0.ms',flagbackup=T,mode='manualflag',selectdata=T,scan='1')
flagdata inputs
  • flagbackup=T : A comment is warranted on the setting of flagbackup (here set to T or True). If set to True, flagdata will save a copy of the existing set of flags before entering any new flags. The setting of flagbackup is therefore a matter of some taste. One could choose not to save any flags or only save "major" flags, or one could save every flag. (One of the authors of this document was glad that flagbackup was set to True as he recently ran flagdata with a typo in one of the entries.)
  • mode='manualflag' : Specific data are going to be selected to be edited.
  • selectdata=T : In order to select the specific data to be flagged, selectdata has to be set to True. Once selectdata is set to True, then the various data selection options become visible (use help flagdata to see the possible options). In this case, scan='1' is chosen to select only the first scan. Note that scan expects an entry in the form of a string. (scan=1 would generate an error.)

If satisfied with the inputs, run this task. The initial display in the logger will include

##########################################
##### Begin Task: flagdata           #####
flagdata::::casa
attached MS [...]
Saving current flags to manualflag_2 before applying new flags
Creating new backup flag file called manualflag_2

which indicates that, among other things, the flags that existed in the data set prior to this run will be saved to another file called manualflag_2. Should one ever desire to revert to the data prior to this run, the task flagmanager could be used.


From the observer's log, we know that antenna 13 does not have a C band receiver, so it should be flagged as well. The parameters are similar as before.

# In CASA
flagdata(vis='3c391_ctm_mosaic_10s_spw0.ms',flagbackup=T,mode='manualflag',selectdata=T,antenna='ea13')
  • antenna='ea13' : Once again, this parameter requires a string input. Also note that antenna='ea13' and 'antenna='13' are not the same antenna. (Check the output from listobs above.)


Finally, it is common for the array to require a small amount of time to "settle down" at the start of a scan. Consequently, it has become standard practice to edit out the initial samples from the start of each scan.

# In CASA
flagdata(vis='3c391_ctm_mosaic_10s_spw0.ms',mode='quack',quackinterval=10.0,quackmode='beg')
  • mode='quack' : Quack is another mode in which the same edit will be applied to all scans for all baselines.
  • quackmode='beg' : In this case, data from the start of each scan will be flagged. Other options include flagging data at the end of the scan.
  • quackinterval=10 : In this data set, the sampling time is 10 seconds, so this choice flags the first sample from all scans on all baselines.


Having now done some basic editing of the data, based in part on a priori information, it is time to look at the data to determine if there are any other obvious problems. One task to examine the data themselves is plotms.

# In CASA
clearstat
plotms(vis='3c391_ctm_mosaic_10s_spw0.ms',xaxis='',yaxis='',averagedata=False,transform=False,extendflag=False,
    plotfile='',selectdata=True,field='0')
plotms inputs
  • clearstat removes any table locks from previous tasks, allowing plotms to run
  • xaxis=' ', yaxis=' ' : One can choose the axes of the plot, i.e., the way of visualizing the data, by using the GUI display once the task is executed.
  • averagedata=F : It is possible to average the data in time, frequency, etc.
  • transform=F : It is possible to change the velocity reference frame of the data.
  • extendflag=F : It is possible to "extend" a flag, i.e., flag data surrounding bad data. For example, one might want to flag spectral channels surrounding a bad spectral channel or one might want to flag cross-polarization data if one flags the parallel polarization data.
  • plotfile=' ' : It is possible to produce a hard copy (e.g., for a paper, report, or Web site) by specifying a file.
  • selectdata=T : One can choose to plot only subsets of the data.
  • field='0': The entire dataset is rather large, and different sources have very different amplitudes, so it is advisable to start by loading a subset of the data. One can later loop through the different fields (i.e. sources) and spectral windows using the GUI interface.

In this case, many other values have been left to defaults as it is also possible to select them from within the plotms GUI. Review the inputs, then run the task.

plotms should produce a GUI, with the default view being to show the visibility amplitude as a function of time.

plotms default GUI view

plotms allows one to select and view the data in many ways. Across the top of the left panel are a set of tabs labeled 'Plots', 'Flagging', 'Tools', 'Annotator', and 'Options'. If one selects the 'Flagging' tab, the option is to 'Extend flags'. Thus, even though plotms was started with extendflag=F, if one decides that it does make sense to extend the flags, one can still do so here.

In the default view, the 'Plots' tab is visible, and there are a number of tabs running down the side of the left hand panel, including 'Data', 'Axes', 'Trans', 'Cache', 'Display', 'Canvas', and 'Export'. Once again, one can make changes on the fly. Thus, supposing that one wants to save a hard copy, even if plotms was started with plotfile=' ', one can select 'Export' and enter a file name in which to save a copy of a plot.

One should spend several minutes displaying the data in various formats. For instance, one could select the 'Data' tab and specify field 0 (source J1331+3030, a.k.a. 3C 286) to display data associated with the amplitude calibrator, then select the 'Axes' tab and change the x axis to be UVDist, and plot the data. The result should be that of the first thumbnail image shown below. The amplitude distribution is relatively constant as a function of u-v distance or baseline length (i.e., [math]\displaystyle{ \sqrt{u^2+v^2} }[/math]). From the various lectures, one should recognize that a relatively constant visibility amplitude as a function of baseline length means that the source is very nearly a point source. (The Fourier transform of a constant is a delta function, a.k.a. a point source.)

By contrast, if one selects field 3 (one of the 3C 391 fields) in the 'Data' tab and plots these data, one sees a visibility function that falls rapidly with increasing baseline length. Such a visibility function indicates a highly resolved source. By noting the baseline length at which the visibility function falls to some fiducial value (e.g., 1/2 of its peak value), one can obtain a rough estimate of the angular scale of the source. (From the lectures, angular scale [in radians] ~ 1/baseline [in wavelengths].)


plotms view of 3C 286
plotms view of 3C 391


As a general data editing and examination strategy, at this stage in the data reduction process, one wants to focus on the calibrators. The data reduction strategy is to determine various corrections from the calibrators, then apply these correction factors to the science data. The 3C 286 data look relatively clean. There are no wildly egregious data (e.g., amplitudes that are 100,000x larger than the rest of the data). One may notice that there are antenna-to-antenna variations (under the 'Display' tab, select 'Colorize by Antenna1'). These antenna-to-antenna variations are acceptable, that's what calibration will help determine.

Calibrating the Data

It is now time to begin calibrating the data. The general data reduction strategy is to derive a series of scaling factors or corrections from the calibrators, which are then collectively applied to the science data. For much more discussion of the philosophy, strategy, and implementation of calibration of synthesis data within CASA, see Synthesis Calibration in the CASA Reference Manual.

Recall that the observed visibility [math]\displaystyle{ V^{\prime} }[/math] between two antennas [math]\displaystyle{ (i,j) }[/math] is related to the "true" visibility [math]\displaystyle{ V }[/math] by

[math]\displaystyle{ V^{\prime}_{i,j}(u,v,f) = b_{ij}(t)\,[B_i(f,t) B^{*}_j(f,t)]\,g_i(t) g_j(t)\,V_{i,j}(u,v,f)\,e^{i [\theta_i(t) - \theta_j(t)]} }[/math]

Here, for generality, we show the visibility as a function of frequency [math]\displaystyle{ f }[/math] and spatial wavenumbers [math]\displaystyle{ u }[/math] and [math]\displaystyle{ v }[/math]. The other terms are

  • [math]\displaystyle{ g_i }[/math] and [math]\displaystyle{ \theta_i }[/math] are the amplitude and phase portions of what is commonly termed the complex gain. They are shown separately here because they are usually determined separately. For completeness, these are shown as a function of time t to indicate that they can change with temperature, atmospheric conditions, etc.
  • [math]\displaystyle{ B_i }[/math] is the complex bandpass. This is clearly a function of frequency [math]\displaystyle{ f }[/math], but, for completeness, it is also shown as a function of time.
  • [math]\displaystyle{ b(t) }[/math] is the often-neglected baseline term. It shall be neglected here as well, though it can be important to include for the highest dynamic range images or shortly after a configuration change at the [E]VLA, when antenna positions may not be known well.

Strictly, the equation above is a simplification of a more general measurement equation formalism, but it is a useful simplification in many cases.

For safety or sanity, one can begin by "clearing the calibration." In CASA, the data structure is that the observed data are stored in a DATA column, estimates of the data (e.g., a priori models for the calibrators, and those derived from the self-calibration process to be done later) are stored in the MODEL_DATA column, and the calibrated data are stored in the CORRECTED_DATA column. The task clearcal initializes the MODEL_DATA and CORRECTED_DATA and sets up some scratch data columns as well. For a pristine data set, straight from the Archive, clearcal probably should not be required; clearcal could be quite important if one decides later that a horrible mistake has been made in the calibration process and one wishes to start over. If you have started with the 10s-averaged dataset suggested at the top of this tutorial, this step has already been done for you, so may be omitted.

# In CASA
clearcal(vis='3c391_ctm_mosaic_10s.ms',field='',spw='')

All parameters are set to blank so that the initialization occurs for all sources and spectral windows.


The first step is to provide a flux density value for the amplitude calibrator J1331+3030 (a.k.a. 3C 286). For the VLA, the ultimate flux density scale at most frequencies was set by 3C 295, which was then transferred to a small number of "primary flux density calibrators," including 3C 286. For the EVLA, at the time of this writing, the flux density scale at most frequencies will be determined from WMAP observations of the planet Mars, in turn then transferred to a small number of primary flux density calibrators. Thus, the procedure is to assume that the flux density of a primary calibrator source is known and, by comparison with the observed data for that calibrator, determine the [math]\displaystyle{ g_i }[/math] values.

# In CASA
setjy(vis='3c391_ctm_mosaic_10s_spw0.ms',field='J1331+3030',
    modimage='/home/casa/data/nrao/VLA/CalModels/3C286_C.im',standard='Perley-Taylor 99',
    fluxdensity=-1)
setjy inputs
  • field='J1331+3030' : Clearly one has to specify what the flux density calibrator is, otherwise all sources will be assumed to have the same flux density.
  • modimage='/home/casa/data/nrao/VLA/CalModels/3C286_C.im' : Although above, from plotms, it was estimated that 3C 286 is roughly a point source, depending upon the frequency and configuration, the source may be slightly resolved. Fiducial model images have been determined from a painstaking set of observations, and, if one is available, it should be used to compensate for slight resolution effects. In this case, spectral window 0 (at 4.536 GHz) is in the C band, so the C-band model image is used.
  • standard='Perley-Taylor 99' : Periodically, the flux density scale at the VLA was revised, updated, or expanded. The specified value represents the most recent determination of the flux density scale (by R. Perley and G. Taylor in 1999); older scales can also be specified, and might be important if, for example, one was attempting to conduct a careful comparison with a previously published result.
  • fluxdensity=-1 : It is possible to specify (i.e., force) the flux density of the source to be a particular value.
  • spw='0' : The original data contained two spectral windows. Having split off spectral window 0, it is not necessary to specify spw, but it will not hurt to do so. Had the spectral window 0 not been split off, as has been done here, it would be necessary to specify the spectral window because, in this observation, the spectral windows were sufficiently separated that the spectrum of 3C 286 means that the same flux density for the calibrator source cannot be assumed for both. If the spectral windows were much closer together, it might be possible to calibrate both with the same flux density value.

In this case, a model image of a primary flux density calibrator exists. However, for some kinds of polarization calibration or in extreme situations (e.g., there are problems with the scan on the flux density calibrator), it can be useful or required to set the flux density of the source explicitly.

The output from setjy should look similar to the following.

INFO    taskmanager::::casa     ##### async task launch:     setjy ########################
INFO    setjy::imager::setjy()    J1331+3030  spwid=  0  [I=7.747, Q=0, U=0, V=0] Jy, (Perley-Taylor 99)
INFO    setjy::imager::setjy()  Using model image /home/casa/data/nrao/VLA/CalModels/3C286_C.im
INFO    setjy::imager::setjy()  The model image's reference pixel is 0.00302169 arcsec from J1331+3030's phase center.
INFO    setjy::imager::setjy()  Scaling model image to I=7.74664 Jy for visibility prediction.
INFO    setjy::imager::data selection   Selecting data

As set, the flux density scale is being set only for spectral window 0 (spw='0' ). The flux density at the center of the spectral window is reported. This value is determined from an analytical formula for the spectrum of the source as a function of frequency; this value must be determined so that the flux density in the image can be scaled to it, as it is unlikely that the observation was taken at exactly the same frequency as the model image.


Bandpass Calibration

In this step one solves for the complex bandpass, [math]\displaystyle{ B_i }[/math].

bandpass illustration

For the VLA, in its old continuum modes, this step could be skipped. With the EVLA, all data are spectral line, even if the science that one is conducting is continuum. Solving for the bandpass won't hurt for continuum data, and, for moderate or high dynamic range image, it is essential. To motivate the need for solving for the bandpass, consider the image to the left. It shows the right circularly polarized data (RR polarization) for the source J1331+3030, which will serve as the bandpass calibrator. The data are color coded by scan, and they are averaged over all baselines, as earlier plots from plotms indicated that the visibility data are nearly constant with baseline length. Ideally, the visibility data would be constant as a function of frequency, with the same amplitude on all baselines. The variations with frequency are a reflection of the (slightly) different antenna bandpasses. (Exercise for the reader, reproduce this plot using plotms.)

Depending upon frequency and configuration, there could be gain variations between the different scans of the bandpass calibrator, particularly if the scans happen at much different elevations. One can solve for an initial set of antenna-based gains, which will later be discarded, in order to moderate the effects of gain variations from scan to scan on the bandpass calibrator.

# In CASA
gaincal(vis='3c391_ctm_mosaic_10s_spw0.ms',caltable='3c391_ctm_mosaic.gcal0',field='J1331+3030',
    refant='ea21',spw='0:27~36',calmode='p',solint='int',minsnr=5,solnorm=T)
first gain solutions
  • caltable='3c391_ctm_mosaic.gcal0' : The gain solutions will be stored in an external table.
  • field='J1331+3030' : Specify the bandpass calibrator. In this case, the bandpass calibrator and the amplitude calibrator happen to be the same source, but it is not always so.
  • refant='ea21' : Earlier, by looking at the output from plotants, a reference antenna near the center of the array was noted. Here is the first time that that choice will be used. Strictly, all of the gain corrections derived will be relative to this reference antenna.
  • spw='0:27~36': One wants to choose a subset of the channels from which to determine the gain corrections. These should be near the center of the band, and there should be enough channels chosen so that a reasonable signal-to-noise ratio can be obtained. (See the output of plotms above.) Particularly at lower frequencies where RFI can manifest itself, one should choose RFI-free frequency channels. Also note that, even though these data have only a single spectral window, the syntax requires specifying the spectral window in order to specify the spectral channels.
  • calmode='p' : Solve for only the phase portion of the gain.
  • solint='int' : One wants to be able to track the phases, so a short solution interval is chosen. (A single integration time or 10 seconds for this case)
  • minsnr=5 : One probably wants to restrict the solutions to be at relatively high signal-to-noise ratios, although this parameter may need to be varied depending upon the source and frequency.
  • solnorm=T : Strictly, for a phase-only solution, the amplitudes should be normalized by zero. This setting enforces that.

One can now examine the phase solutions using plotcal. The inputs shown below plot the phase portion of the gain solutions as a function of time for the calibrator for R and L polarization separately.

# In CASA
plotcal(caltable='3c391_ctm_mosaic.gcal0',xaxis='time',yaxis='phase',poln='R',field='J1331+3030',spw='',
        figfile='plotcal-3C286-G0-phase-R.png')
# In CASA
plotcal(caltable='3c391_ctm_mosaic.gcal0',xaxis='time',yaxis='phase',poln='L',field='J1331+3030',spw='',
        figfile='plotcal-3C286-G0-phase-L.png')

Inspection of the resulting plots (shown below, exercise for the reader, reproduce these plots) shows that the phase is relatively stable within a scan, but does vary from scan to scan. If plotcal is run interactively, with the GUI, one can select sub-regions within the plot and zoom into them to look at the phase in more detail.

gain phases for 3C 286, R polarization
gain phases for 3C 286, L polarization


Now form the bandpass itself, using the phase solutions just derived.

# In CASA
bandpass(vis='3c391_ctm_mosaic_10s_spw0.ms',gaintable='3c391_ctm_mosaic.gcal0',caltable='3c391_ctm_mosaic.bcal0',
    field='J1331+3030',spw='',refant='ea21',solnorm=True,combine='scan',solint='inf',bandtype='B')
bandpass inputs
  • gaintable='3c391_ctm_mosaic.gcal0' : This gaintable contains the phase solutions just derived. By having a non-blank value for gaintable, bandpass will apply the solutions contained within it before deriving the bandpass corrections themselves.
  • caltable='3c391_ctm_mosaic.bcal0' : Specify where to store the bandpass corrections.
  • solnorm=T : Make sure that the amplitudes of the bandpass corrections are normalized to unity.
  • solint='inf' and combine='scan' : This observation contains multiple scans on the bandpass calibrator, J1331+3030. Because these are continuum observations, it is probably acceptable to combine all the scans and compute one bandpass correction per antenna, which is achieved by the combination of solint='inf' and combine='scan'. Had combine=' ', then there would have been a bandpass correction derived per scan, which might be necessary for the highest dynamic range spectral line observations.
  • bandtype='B' : The bandpass solution will be derived on a channel-by-channel basis. There is an alternate, somewhat experimental option of bandtype='BPOLY' that will attempt to fit an n-th order polynomial to the bandpass.

Once again, one can use plotcal to display the bandpass solutions. Note that in the plotcal inputs below, the amplitudes are being displayed as a function of frequency channel and, for compactness, subplot=221 is used to display multiple plots per page. One could use yaxis='phase' to view the phases as well. We use iteration='antenna' to step through separate plots for each antenna.

# In CASA
plotcal(caltable= '3c391_ctm_mosaic.bcal0',poln='R',xaxis='chan',yaxis='amp',field= 'J1331+3030',subplot=221,
    iteration='antenna',figfile='plotcal-3C286-B0-R.png')
plotcal(caltable= '3c391_ctm_mosaic.bcal0',poln='L',xaxis='chan',yaxis='amp',field= 'J1331+3030',subplot=221,
    iteration='antenna',figfile='plotcal-3C286-B0-L.png')
bandpass for 3C 286, R polarization
bandpass for 3C 286, L polarization


Gain Calibration

The next step is to derive corrections for the complex antenna gains, [math]\displaystyle{ g_i }[/math] and [math]\displaystyle{ \theta_i }[/math]. As discussed in the lectures and above, the gain amplitudes [math]\displaystyle{ g_i }[/math] are determined by reference to a standard flux density calibrator. In order to determine the gain phases [math]\displaystyle{ \theta_i }[/math], one wants to observe a phase calibrator that is much closer to the target source, in order to minimize differences through the atmosphere (neutral and/or ionized) between the lines of sight to the phase calibrator and the target source. In principle, one could determine the complex antenna gains with a single invocation of gaincal; for clarity here, two separate invocations will be used.

In the first step, the gain amplitudes [math]\displaystyle{ g_i }[/math] will be determined from the flux density calibrator 3C 286.

# In CASA
gaincal(vis='3c391_ctm_mosaic_10s_spw0.ms',caltable='3c391_ctm_mosaic.gcal1',field='J1331+3030',spw='0:5~58',
    refant='ea21',gaintype='G',gaintable='3c391_ctm_mosaic.bcal0',calmode='ap',solint='inf')
  • caltable='3c391_ctm_mosaic.gcal1' : Produce a new calibration table containing these gain solutions. In order to make the bookkeeping easier, a '1' is appended to the file name to distinguish it from the earlier set of gain solutions, which are effectively being "thrown away."
  • spw='0:5~58' : From the inspection of the bandpass, one can determine the range of edge channels that are affected by the bandpass filter rolloff. Because the amplitude is dropping rapidly in these channels, one does not want to include them in the solution.
  • gaintype='G' and calmode='ap' : Solve for the complex antenna gains.
  • solint='inf' : Produce a solution for each scan.
  • gaintable='3c391_ctm_mosaic.bcal0' : Use the bandpass solutions determined earlier to correct for the bandpass shape before solving for the gain amplitudes.

After reviewing the inputs to gaincal and running it, one could use plotcal to plot the solutions. While a useful sanity check, the plots themselves will be rather sparse as only a single gain amplitude is being determined for each antenna for each scan.


In the second step, the gain amplitudes [math]\displaystyle{ \theta_i }[/math] will be determined from the phase calibrators J1822-0938 and J0319+4130.

# In CASA
gaincal(vis='3c391_ctm_mosaic_10s_spw0.ms',caltable='3c391_ctm_mosaic.gcal1',field='J1822-0938,J0319+4130',
    spw='0,1:5~58',refant='ea21',gaintype='G',gaintable='3c391_ctm_mosaic.bcal0',calmode='ap',
    solint='inf',append=True)
  • caltable='3c391_ctm_mosaic.gcal1' and append=True : In all previous invocations of gaincal, append has been set to False. Here, the gain solutions from the phase calibrators are going to be appended to the existing set from 3C 286. In following steps, all of these gain solutions will then be used together to derive a set of complex gains that are applied to the science data for the target source.

If one checks the gain phase solutions using plotcal, one should see several solutions for each antenna as a function of time. In order to track the phases, the phase calibrator is typically observed much more frequently during the course of an observation than is the flux density calibrator. In the examples shown below, note that one of the panels is blank, which corresponds to antenna 13, the one flagged earlier in the process.

gain phase solutions for J1822-0398, R polarization
gain phase solutions for J1822-0398, L polarization


Polarization Calibration

[If time is running short, skip this step and proceed to [Applying the Calibration].]

Having set the complex gains, we now need to do the polarization calibration. This should be done prior to running fluxscale, since it has to run using the un-rescaled gains in the MODEL_DATA column of the measurement set. Polarization calibration is done in two steps. First, we solve for the instrumental polarization (the frequency-dependent leakage terms, or 'D-terms'), using either an unpolarized source or a source which has sufficiently good parallactic angle coverage. Second, we solve for the polarization position angle using a source with a known polarization position angle (3C 286 is recommended here).

Our initial run of setjy only set the total intensity of our flux calibrator source, 3C 286. This source is known to have a fractional polarization of 11.2% at C-band, and a polarization position angle of 66 degrees. In order to calibrate the position angle, we need to set the appropriate values for Stokes Q and U. Examining our casapy.log file to find the output of setjy, we find that the total intensity was set to 7.74664 Jy in spw0. We therefore use python to find the polarized flux, P, and the values of Stokes Q and U.

# In CASA
i0=7.74664 # Stokes I value for spw 0
p0=0.112*i0 # Fractional polarization=11.2%
q0=p0*cos(66*pi/180) # Stokes Q for spw 0
u0=p0*sin(66*pi/180) # Stokes U for spw 0

We now set the values of Stokes Q and U for 3C 286, using setjy as we did before.

# In CASA
setjy(vis='3c391_ctm_mosaic_10s_spw0.ms',field='J1331+3030',modimage='',spw='0',fluxdensity=[i0,q0,u0,0])
  • modimage=' ' : A model image is not used here.

Note that the Stokes V flux value is set to zero, corresponding to no circular polarization.

Solving for the Leakage Terms

The task we will use to do all the polarization calibration is polcal. In this data set, we observed the unpolarized calibrator J0319+4130 (a.k.a. 3C 84) in order to solve for the instrumental polarization. polcal uses the Stokes IQU values in the MODEL_DATA column (Q and U being zero for our unpolarized calibrator) to derive the leakage solutions. The final function call is:

# In CASA
polcal(vis='3c391_ctm_mosaic_10s_spw0.ms',caltable='3c391_ctm_mosaic.pcal0',field='J0319+4130',
    spw='',refant=refant,poltype='Df',
    gaintable=['3c391_ctm_mosaic.gcal1', '3c391_ctm_mosaic.bcal0'],
    gainfield=['J0319+4130',             'J1331+3030'])
polcal inputs
  • caltable='3c391_ctm_mosaic.pcal0' : polcal will create a new calibration table containing the leakage solutions, which we specify with the caltable argument.
  • field='J0319+4130' : We use the unpolarized source J0319+4130 (a.k.a. 3C 84) to solve for the leakages.
  • poltype='Df' : We will solve for the leakages (D) on a per-channel basis (f). Had we have been solving for the leakages using a calibrator with unknown polarization but with good parallactic angle coverage, we would simultaneously have needed to solve for the source polarization (poltype='Df+QU' ).
  • gaintable=['3c391_ctm_mosaic.gcal1', '3c391_ctm_mosaic.bcal0'] : We apply our existing gain and bandpass tables on-the-fly by specifying them in a Python list.
  • gainfield=['J0319+4130','J1331+3030'] : Use only the specified sources from 3c391_ctm_mosaic.gcal1 and 3c391_ctm_mosaic.bcal0, respectively, when applying these previous gain and bandpass corrections.

After polcal has finished running, you are strongly advised to examine the solutions with plotcal, to ensure that everything looks good.

# In CASA
plotcal(caltable='3c391_ctm_mosaic.pcal0',xaxis='chan',yaxis='amp',spw='',field='',iteration='antenna')


plotcal GUI showing the Df solutions from polcal

This will produce plots similar to that shown at right. As ever, you can cycle through the antennas by clicking the "Next" button. You should see leakages of between 5 and 15% in most cases.


Solving for the R-L polarization angle

Having calibrated the instrumental polarization, the total polarization is now correct, but we still need to calibrate the R-L phase, to get an accurate polarization position angle. We use the same task, polcal, but this time set poltype='Xf' , which specifies a frequency-dependent (f) position angle (X) calibration, using the source J1331+3030 (aka 3C 286), whose position angle we know, having set this earlier using setjy. Note that we must correct for the leakages before determining the R-L phase, which we do by adding the calibration table made in the previous step (3c391_ctm_mosaic.pcal0) to the gain tables which are applied on-the-fly.

# In CASA
polcal(vis='3c391_ctm_mosaic_10s_spw0.ms',caltable='3c391_ctm_mosaic.xcal0',poltype='Xf',
    gaintable=['3c391_ctm_mosaic.gcal1', '3c391_ctm_mosaic.bcal0', '3c391_ctm_mosaic.pcal0'],
    field='J1331+3030',refant='ea21')

Again, it is strongly suggested that you check the calibration worked properly, by plotting up the newly-generated calibration table using plotcal. The results are shown at right. You will notice that when iterating, the calibration appears to be identical for all antennas.

# In CASA
plotcal(caltable='3c391_ctm_mosaic.xcal0',xaxis='chan',yaxis='phase',iteration='antenna')
plotcal GUI showing Xf solutions from polcal

At this point, your dataset contains all the necessary polarization calibration, which will shortly be applied to the data.

Applying the calibration

While we know the flux density of our primary calibrator (in our case, J1331+3030[math]\displaystyle{ \equiv }[/math]3C 286), the model assumed for the secondary calibrator (here, J1822-0938) was a point source of 1 Jy located at the phase center. While the secondary calibrator was chosen to be a point source (at least, over some limited range of uv-distance; see the VLA calibrator manual for any u-v restrictions on your calibrator of choice at the observing frequency), its absolute flux density is unknown. Being pointlike, secondary calibrators typically vary on timescales of months to years, in some cases by up to 50--100%. A nice Java Applet is available to track the flux density history of various calibrators over time. Play around with it to see how much some of the calibrators from the manual can vary, and over what sorts of timescales.

We use the primary calibrator (the 'flux calibrator') to determine the system response to a source of known flux density, and assume that the mean gain amplitudes for the primary calibrator are the same as those for the secondary calibrator. This then allows us to find the true flux density of the secondary calibrator. To do this, we use the task fluxscale, which produces a new calibration table containing properly-scaled amplitude gains for the secondary calibrator.

# In CASA
fluxscale(vis='3c391_ctm_mosaic_10s_spw0.ms',caltable='3c391_ctm_mosaic.gcal1',fluxtable='3c391_ctm_mosaic.fluxscale1',
    reference='J1331+3030',transfer='J1822-0938,J0319+4130',append=True)
  • caltable='3c391_ctm_mosaic.gcal1' : We provide fluxscale with the calibration table containing the amplitude gain solutions derived earlier
  • fluxtable='3c391_ctm_mosaic.fluxscale1' : We specify the name of the new output table to be written, which will contain the properly-scaled amplitude gains.
  • reference='J1331+3030' : We specify the source with the known flux density.
  • transfer='J1822-0938,J0319+4130' : We specify the sources whose amplitude gains are to be rescaled.

fluxscale will print to the CASA logger the derived flux densities of all calibrator sources specified with the transfer argument. You should examine the output to ensure that it looks sensible. If one's data set has more than 1 spectral window, depending upon where they are spaced and the spectrum of the source, it is quite possible to find (quite) different flux densities at the different frequencies for the secondary calibrators. Example output for this data set would be

INFO    fluxscale::::casa       ##########################################
INFO    fluxscale::::casa       ##### Begin Task: fluxscale          #####
INFO    fluxscale::::casa
INFO    fluxscale::calibrater::open     Opening MS: 3c391_mosaic_10s.ms for calibration.
INFO    fluxscale::Calibrater:: Initializing nominal selection to the whole MS.
INFO    fluxscale::calibrater::fluxscale        Beginning fluxscale--(MSSelection version)-------
INFO    fluxscale::::    Found reference field(s): J1331+3030
INFO    fluxscale::::    Found transfer field(s):  J1822-0938 J0319+4130
INFO    fluxscale::::    Flux density for J1822-0938 in SpW=0 is: 2.32824 +/- 0.00706023 (SNR = 329.768, nAnt= 25)
INFO    fluxscale::::    Flux density for J0319+4130 in SpW=0 is: 13.7643 +/- 0.0348429 (SNR = 395.04, nAnt= 25)
INFO    fluxscale::Calibrater::fluxscale        Appending result to 3c391_mosaic.fluxscale1
INFO    fluxscale::::   Appending solutions to table: 3c391_mosaic.fluxscale1
INFO    fluxscale::::casa
INFO    fluxscale::::casa       ##### End Task: fluxscale            #####

The VLA calibrator manual can be used to check whether the derived flux densities look sensible. Wildly different flux densities or flux densities with very high error bars should be treated with suspicion; in such cases you will have to figure out whether something has gone wrong.

Now that we have derived all the calibration solutions, we need to apply them to the actual data, using the task applycal. The measurement set contains three data columns; DATA, MODEL_DATA, and CORRECTED_DATA. The DATA column contains the original data. The MODEL_DATA column contains whatever model we used for the calibration; for J1331+3030, this is what we specified in setjy, and for all other sources, this was set to a point source of 1 Jy at the phase center when the scratch columns were originally created using clearcal. To apply the calibration we have so painstakingly derived, we specify the appropriate calibration tables, which are then applied to the DATA column, with the results being written in the CORRECTED_DATA column.

First, we apply the calibration to each individual calibrator, using the gain solutions derived on that calibrator alone to compute the CORRECTED_DATA. To do this, we iterate over the different calibrators, in each case specifying the source to be calibrated (using the field parameter).

# In CASA
applycal(vis='3c391_ctm_mosaic_10s_spw0.ms',
    gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
    parang=True,field='J1331+3030',gainfield=['J1331+3030','','',''],interp=['nearest','','',''])

applycal(vis='3c391_ctm_mosaic_10s_spw0.ms',
    gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
    parang=True,field='J0319+4130',gainfield=['J0319+4130','','',''],interp=['nearest','','',''])

applycal(vis='3c391_ctm_mosaic_10s_spw0.ms',
    gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
    parang=True,field='J1822-0938',gainfield=['J1822-0938','','',''],interp=['nearest','','',''])
  • gaintable : We provide a Python list of the calibration tables to be applied. This must contain our properly-scaled gain calibration for the amplitudes and phases (in 3c391_ctm_mosaic.fluxscale1) which we just made using fluxscale, our bandpass solutions (in 3c391_ctm_mosaic.bcal0), our leakage calibration (in 3c391_ctm_mosaic.pcal0) and the R-L phase corrections (in 3c391_ctm_mosaic.xcal0). While the latter three tables were derived using a particular calibrator source, the table containing the gain solutions for amplitude and phase was derived separately for each individual calibrator.
  • gainfield, interp : To ensure that we use the correct gain amplitudes and phases for a given calibrator (those derived on that same calibrator), then for each calibrator source, we need to specify the particular subset of gain solutions to be applied. This requires use of the gainfield and interp arguments; these are both Python lists, and for the list item corresponding to the calibration table made by fluxscale, we set gainfield to the field name corresponding to that calibrator, and the desired interpolation type (interp) to nearest.
  • parang : Since we have performed polarization calibration, we must set parang=True, or we will discard all that hard work we did earlier.

Finally, we apply the calibration to the target fields in the mosaic, linearly interpolating the gain solutions from the secondary calibrator, J1822-0938. In this case however, we want to apply the amplitude and phase gains derived from the secondary calibrator, J1822-0938, since that is close to the target source on the sky, and we assume that the gains applicable to the target source are very similar to those derived in the direction of the secondary calibrator. Of course, this is not strictly true, since the gains on J1822-0938 were derived at a different time and in a different position on the sky from the target. However, assuming that the calibrator was sufficiently close to the target, and the weather was sufficiently well-behaved, then this is a reasonable approximation, and should get us a sufficiently good calibration that we can later use self-calibration to correct for the small inaccuracies thus introduced.

The procedure for applying the calibration to the target source is very similar to what we just did for the calibrator sources.

# In CASA
applycal(vis='3c391_ctm_mosaic_10s.ms',
    gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
    parang=True,field='2~8',gainfield=['J1822-0938','','',''],interp=['linear','','',''])
  • field : We can calibrate all seven target fields at once by setting field='2~8' .
  • gainfield : In this case, we wish to use the gains derived on the secondary calibrator, for the reasons explained in the previous paragraph.
  • interp : This time, we linearly interpolate between adjacent calibrator scans, to compute the appropriate gains for the intervening observations of the target.
plotms GUI showing amplitude plotted against phase for the calibrated data on the secondary calibrator J1822-0938

We should now have fully-calibrated visibilities in the CORRECTED_DATA column of the measurement set, and it is worthwhile pausing to inspect them, to ensure that the calibration did what we expected it to. A nice way of doing this is to use plotms to plot the amplitude and phase of the CORRECTED_DATA column against one another. This should show a nice ball of visibilities centered at zero phase (with some scatter) and the amplitude found for that source in fluxscale. An example is shown at right.

Once the calibration has been applied to the target data, we can split off the science targets, creating a new, calibrated measurement set containing all the target fields. In this case, we also split up the data by spectral window, so we can image the two different frequencies separately.

# In CASA
split(vis='3c391_ctm_mosaic_10s.ms',outputvis='3c391_ctm_mosaic_spw0.ms',datacolumn='corrected',field='2~8',spw='0')
split(vis='3c391_ctm_mosaic_10s.ms',outputvis='3c391_ctm_mosaic_spw1.ms',datacolumn='corrected',field='2~8',spw='1')
  • outputvis : We give the name of the new measurement set to be written, which will contain the calibrated data on the science targets.
  • datacolumn : We use the CORRECTED_DATA column, containing the calibrated data which we just wrote using applycal.
  • field : We wish to put all the mosaic pointings into a single measurement set, for imaging and joint deconvolution.

Imaging and self-calibration

Now that we have split off the target data into a separate measurement set with all the calibration applied, it's time to make an image. Recall from the lectures that the visibility data and the sky brightness distribution (a.k.a. image) are Fourier transform pairs

[math]\displaystyle{ I(l,m) = \int V(u,v) e^{[2\pi i(ul + vm)]} dudv }[/math]

The [math]\displaystyle{ u }[/math] and [math]\displaystyle{ v }[/math] coordinates are the baselines, measured in units of the observing wavelength while the [math]\displaystyle{ l }[/math] and [math]\displaystyle{ m }[/math] coordinates are the direction cosines on the sky. For generality, the sky coordinates are written in terms of direction cosines, but for most EVLA (and ALMA) observations they can be related simply to the right ascension ([math]\displaystyle{ l }[/math]) and declination ([math]\displaystyle{ m }[/math]). Also recall from the lectures that this equation is valid only if the [math]\displaystyle{ w }[/math] coordinate of the baselines can be neglected. This assumption is almost always true at high frequencies and smaller EVLA configurations (such as the 4.6 GHz, D-configuration observations here); the [math]\displaystyle{ w }[/math] coordinate cannot be neglected at lower frequencies and larger configurations (e.g., 0.33 GHz, A-configuration observations). This expression also neglects other factors, such as the shape of the primary beam. For more information on imaging, see [Synthesis Imaging] within the CASA Reference Manual.


CASA has a single task, clean which both Fourier transforms the data and deconvolves the resulting image. A command line call to image and deconvolve the dataset would be:

# In CASA
clean(vis='3c391_ctm_mosaic_spw0.ms',imagename='3c391_ctm_spw0_IQUV',cell=['2.0arcsec','2.0arcsec'],imsize=[576,576],
    mode='mfs',niter=10000,threshold='1.0mJy',stokes='IQUV',psfmode='clarkstokes',
    weighting='briggs',imagermode='mosaic',multiscale=[1,3,10,30,100],mask=[162,177,377,397])

To image the dataset in all four polarizations (total intensity I, linear polarizations Q and U, and circular polarization V), we set stokes='IQUV', which makes separate images in each polarization. We also set psfmode='clarkstokes, which uses the clark clean algorithm to deconvolve each Stokes plane separately. This makes the polarization image more independent of the total intensity.

plotms GUI showing Amplitude vs UV Distance in wavelengths for 3C 391 at 4600 MHz

Since our fractional bandwidth is non-zero (128 MHz at a central frequency of 4.6 GHz), there is a slight improvement in uv-coverage if we do not average all channels together. Our dataset consists of multiple spectral channels, whose data we wish to combine into a single image, gridding each channel separately. We therefore set mode='mfs'.

We need to select the appropriate pixel size to use. Using plotms to look at the newly-calibrated, target-only data set:

# In CASA
plotms(vis='3c391_ctm_mosaic_spw0.ms',xaxis='uvdist_l',yaxis='amp')

we select the axes tab on the left hand side, and select UVDist_L as the x-axis. This gives the plot shown at right.

The maximum baseline shown corresponds to about 16,000 wavelengths, i.e. an angular scale of 12 arcseconds ([math]\displaystyle{ \lambda/D=1/16000 }[/math]). Since we wish to have a number of pixels across a resolution element, we then select a pixel size of 2 arcseconds in both co-ordinates by setting cell=['2.0arcsec','2.0arcsec']. The supernova remnant is known to have a diameter of order 9 arcmin, which corresponds to about 270 pixels. To prevent image artifacts arising from aliasing, we wish to keep the emission region to roughly the inner quarter of the image. The Fourier transform is most efficient if the number of pixels on a side is a composite number divisible by 2 and 3 and/or 5. We choose 576, which is [math]\displaystyle{ 2^6\times3^2 }[/math], and is close to [math]\displaystyle{ 2\times270 }[/math]. We therefore set imsize=[576,576].

Since 3C 391 has diffuse, extended emission which is being resolved out by the interferometer owing to a lack of short spacings, a naturally-weighted image would show large-scale patchiness in the noise. In order to suppress this effect, we select Briggs weighting (intermediate between natural and uniform weighting), with a default robust factor of 0 (setting weighting='briggs').

Our data consists of a 7-pointing mosaic, since the supernova remnant fills almost the full primary beam at 4.6 GHz. We therefore wish to perform a joint deconvolution on all 7 fields, which we do simply by setting imagermode='mosaic', and using the default mosaic parameters.

Because the supernova remnant contains both diffuse, extended structure on large spatial scales, and also finer filamentary structure on smaller scales, we use the multiscale clean algorithm, which removes clean components which are circular Gaussians as well as delta functions. We set a logarithmically-spaced range of spatial scales to use for the widths of the Gaussian components, which we specify in pixels. To do this, we set multiscale=[1,3,10,30,100].

To prevent the clean algorithm finding spurious components on noise peaks, especially at the larger scales in the multiscale clean, we set a region within which the task will search for clean components, using mask=[162,177,377,397], which encompasses the observed emission (we can get a rough idea of where the bulk of the emission lies by running clean once with no deconvolution, i.e. niter=0, to make a dirty image, which we can then inspect with the viewer to locate the emission regions). To prevent overcleaning, we wish to stop the deconvolution when we have reached a residual flux level of 1 mJy (setting threshold='1.0mJy'), or when we have generated 10000 clean components (setting niter=10000).

viewer display of the Stokes I mosaic of 3C 391 at 4600 MHz

clean will make several output files, all named with the prefix given as imagename. These include:

  • .image - the final restored image, with the clean components convolved with a restoring beam and added to the remaining residuals at the end of the imaging process
  • .flux - the effective response of the telescope (the primary beam)
  • .flux.pbcoverage - the effective response of the full mosaic image
  • .mask - the areas where you have permitted imager to find clean components
  • .model - the sum of all the clean components, which has been stored as the model_data column in the measurement set
  • .psf - the dirty beam, which is being deconvolved from the true sky brightness during the clean process
  • .residual - what is left at the end of the deconvolution process; this is useful to diagnose whether or not to clean more deeply

After the imaging and deconvolution process has finished, you can use the viewer to look at your image.

# In CASA
viewer('3c391_ctm_spw0_IQUV.image')

This will bring up a viewer window containing the image, which should look similar to that shown at right. The tape deck buttons that you see under the image can be used to step through the different Stokes parameters (I,Q,U,V). You can adjust the color scale and zoom in to a selected region by assigning mouse buttons to the icons immediately above the image (hover over the icons to get a description of what they do).

Note that the image is cut off in a circular fashion at the edges, corresponding to the default minimum primary beam response within clean of 0.2.

A similar procedure may be followed for the higher-frequency spectral window, by specifying the appropriate measurement set to use. We note that there is significant RFI at the higher frequency, which preferentially affects the last third of the observation. This can be edited out by selecting scan<70 in the inputs to clean, although more careful editing of the data may recover some of the visibilities.