|
|
| (291 intermediate revisions by 9 users not shown) |
| Line 1: |
Line 1: |
| [[Category:EVLA]][[Category:Calibration]]
| | #REDIRECT [[EVLA Continuum Tutorial 3C391-CASA4.6]] |
| | |
| == Overview ==
| |
| This article describes the calibration and imaging of a multiple-pointing EVLA continuum dataset on the supernova remnant 3C 391. The data were taken in OSRO1 mode, with 128 MHz of bandwidth in each of two widely spaced spectral windows, centered at 4.6 and 7.5 GHz, and were set up for full polarization calibration. To generate the full data reduction script described here, use the [[Extracting_scripts_from_these_tutorials | script extractor]].
| |
| | |
| == Getting hold of your data ==
| |
| The data are publicly available from the [https://archive.nrao.edu/archive/archiveproject.jsp NRAO archive], under Project name TDEM0001. The archive lists two separate files; one taken on 2010-Apr-15, and the other on 2010-Apr-24. You will want to download the second file (file size 39.79 GB). This file contains data at the full 1-s time resolution.
| |
| | |
| == Loading in your data ==
| |
| <source lang="python">
| |
| importevla(asdm='TDEM0001_sb1218006_1.55310.33439732639',vis='3c391_mosaic_fullres.ms',flagzero=True,shadow=True)
| |
| </source>
| |
| | |
| == Examining your data ==
| |
| | |
| Before starting the calibration process, we want to get some basic information about the data set. To examine the observing conditions during the observing run, and to find out any known problems with the data, download the [http://www.vla.nrao.edu/cgi-bin/oplogs.cgi observer log]. Simply fill in the known observing date (in our case 2010-Apr-24) as both the Start and Stop date, and click on the "Show Logs" button. The relevant log is labeled with the project code, TDEM0001, and can be downloaded as a PDF file.
| |
| | |
| To get a listing of the individual scans comprising the observation, the frequency setup, source list, and antenna locations, use the task [[listobs]].
| |
| | |
| <source lang="python">
| |
| listobs(vis='3c391_ctm_mosaic_10s.ms',verbose=T)
| |
| </source>
| |
| | |
| listobs should now produce the following output in the casa logger:
| |
| | |
| <pre style="background-color: #ffe4b5;">
| |
| 2010-04-27 19:16:49 INFO listobs::::casa ##########################################
| |
| 2010-04-27 19:16:49 INFO listobs::::casa ##### Begin Task: listobs #####
| |
| 2010-04-27 19:16:49 INFO listobs::::casa
| |
| 2010-04-27 19:16:49 INFO listobs::ms::summary ================================================================================
| |
| 2010-04-27 19:16:49 INFO listobs::ms::summary+ MeasurementSet Name: /export/home/hamal/jmiller/TDEM0001_sb1218006/3c391_mosaic_fullres.ms MS Version 2
| |
| 2010-04-27 19:16:49 INFO listobs::ms::summary+ ================================================================================
| |
| 2010-04-27 19:16:49 INFO listobs::ms::summary+ Observer: Dr. James Miller-Jones Project: T.B.D.
| |
| 2010-04-27 19:16:49 INFO listobs::ms::summary+ Observation: EVLA
| |
| 2010-04-27 19:16:49 INFO listobs::ms::summary Data records: 18666050 Total integration time = 28716 seconds
| |
| 2010-04-27 19:16:49 INFO listobs::ms::summary+ Observed from 24-Apr-2010/08:01:34.5 to 24-Apr-2010/16:00:10.5 (UTC)
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ ObservationID = 0 ArrayID = 0
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ Date Timerange (UTC) Scan FldId FieldName nVis Int(s) SpwIds
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 24-Apr-2010/08:01:34.5 - 08:02:28.5 1 0 J1331+3030 35750 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:02:29.5 - 08:09:27.5 2 0 J1331+3030 272350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:09:28.5 - 08:16:26.5 3 0 J1331+3030 272350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:16:27.5 - 08:24:25.5 4 1 J1822-0938 311350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:24:26.5 - 08:29:44.5 5 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:29:45.5 - 08:34:43.5 6 3 3C391 C2 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:34:44.5 - 08:39:42.5 7 4 3C391 C3 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:39:43.5 - 08:44:41.5 8 5 3C391 C4 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:44:42.5 - 08:49:40.5 9 6 3C391 C5 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:49:41.5 - 08:54:40.5 10 7 3C391 C6 195000 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:54:41.5 - 08:59:39.5 11 8 3C391 C7 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 08:59:40.5 - 09:01:29.5 12 1 J1822-0938 71500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:01:30.5 - 09:06:48.5 13 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:06:49.5 - 09:11:47.5 14 3 3C391 C2 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:11:48.5 - 09:16:46.5 15 4 3C391 C3 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:16:47.5 - 09:21:45.5 16 5 3C391 C4 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:21:46.5 - 09:26:44.5 17 6 3C391 C5 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:26:45.5 - 09:31:44.5 18 7 3C391 C6 195000 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:31:45.5 - 09:36:43.5 19 8 3C391 C7 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:36:44.5 - 09:38:32.5 20 1 J1822-0938 70850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:38:33.5 - 09:43:52.5 21 2 3C391 C1 208000 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:43:53.5 - 09:48:51.5 22 3 3C391 C2 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:48:52.5 - 09:53:50.5 23 4 3C391 C3 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:53:51.5 - 09:58:49.5 24 5 3C391 C4 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 09:58:50.5 - 10:03:48.5 25 6 3C391 C5 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:03:49.5 - 10:08:47.5 26 7 3C391 C6 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:08:48.5 - 10:13:47.5 27 8 3C391 C7 195000 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:13:48.5 - 10:15:36.5 28 1 J1822-0938 70850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:15:37.5 - 10:20:55.5 29 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:20:56.5 - 10:25:55.5 30 3 3C391 C2 195000 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:25:56.5 - 10:30:54.5 31 4 3C391 C3 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:30:55.5 - 10:35:53.5 32 5 3C391 C4 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:35:54.5 - 10:40:52.5 33 6 3C391 C5 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:40:53.5 - 10:45:51.5 34 7 3C391 C6 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:45:52.5 - 10:50:51.5 35 8 3C391 C7 195000 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:50:52.5 - 10:52:40.5 36 1 J1822-0938 70850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:52:41.5 - 10:57:39.5 37 0 J1331+3030 194350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 10:57:40.5 - 11:02:39.5 38 1 J1822-0938 195000 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:02:40.5 - 11:07:58.5 39 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:07:59.5 - 11:12:47.5 40 3 3C391 C2 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:12:48.5 - 11:17:36.5 41 4 3C391 C3 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:17:37.5 - 11:22:25.5 42 5 3C391 C4 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:22:26.5 - 11:27:15.5 43 6 3C391 C5 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:27:16.5 - 11:32:04.5 44 7 3C391 C6 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:32:05.5 - 11:36:53.5 45 8 3C391 C7 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:36:54.5 - 11:38:43.5 46 1 J1822-0938 71500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:38:44.5 - 11:44:02.5 47 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:44:03.5 - 11:48:51.5 48 3 3C391 C2 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:48:52.5 - 11:53:40.5 49 4 3C391 C3 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:53:41.5 - 11:58:29.5 50 5 3C391 C4 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 11:58:30.5 - 12:03:19.5 51 6 3C391 C5 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:03:20.5 - 12:08:08.5 52 7 3C391 C6 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:08:09.5 - 12:12:57.5 53 8 3C391 C7 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:12:58.5 - 12:14:47.5 54 1 J1822-0938 71500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:14:48.5 - 12:20:06.5 55 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:20:07.5 - 12:24:55.5 56 3 3C391 C2 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:24:56.5 - 12:29:44.5 57 4 3C391 C3 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:29:45.5 - 12:34:34.5 58 5 3C391 C4 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:34:35.5 - 12:39:23.5 59 6 3C391 C5 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:39:24.5 - 12:44:12.5 60 7 3C391 C6 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:44:13.5 - 12:49:01.5 61 8 3C391 C7 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:49:02.5 - 12:50:51.5 62 1 J1822-0938 71500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:50:52.5 - 12:56:10.5 63 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 12:56:11.5 - 13:00:59.5 64 3 3C391 C2 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:01:00.5 - 13:05:48.5 65 4 3C391 C3 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:05:49.5 - 13:10:38.5 66 5 3C391 C4 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:10:39.5 - 13:15:27.5 67 6 3C391 C5 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:15:28.5 - 13:20:16.5 68 7 3C391 C6 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:20:17.5 - 13:25:05.5 69 8 3C391 C7 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:25:06.5 - 13:26:55.5 70 1 J1822-0938 71500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:26:56.5 - 13:32:14.5 71 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:32:15.5 - 13:37:03.5 72 3 3C391 C2 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:37:04.5 - 13:41:52.5 73 4 3C391 C3 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:41:53.5 - 13:46:42.5 74 5 3C391 C4 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:46:43.5 - 13:51:31.5 75 6 3C391 C5 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:51:32.5 - 13:56:20.5 76 7 3C391 C6 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 13:56:21.5 - 14:01:09.5 77 8 3C391 C7 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:01:10.5 - 14:02:59.5 78 1 J1822-0938 71500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:03:00.5 - 14:08:18.5 79 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:08:19.5 - 14:13:07.5 80 3 3C391 C2 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:13:08.5 - 14:17:57.5 81 4 3C391 C3 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:17:58.5 - 14:22:46.5 82 5 3C391 C4 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:22:47.5 - 14:27:35.5 83 6 3C391 C5 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:27:36.5 - 14:32:24.5 84 7 3C391 C6 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:32:25.5 - 14:37:13.5 85 8 3C391 C7 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:37:14.5 - 14:39:03.5 86 1 J1822-0938 71500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:39:04.5 - 14:44:22.5 87 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:44:23.5 - 14:49:11.5 88 3 3C391 C2 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:49:12.5 - 14:54:01.5 89 4 3C391 C3 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:54:02.5 - 14:58:50.5 90 5 3C391 C4 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 14:58:51.5 - 15:03:39.5 91 6 3C391 C5 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:03:40.5 - 15:08:28.5 92 7 3C391 C6 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:08:29.5 - 15:13:17.5 93 8 3C391 C7 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:13:18.5 - 15:15:07.5 94 1 J1822-0938 71500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:15:08.5 - 15:20:26.5 95 2 3C391 C1 207350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:20:27.5 - 15:25:15.5 96 3 3C391 C2 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:25:16.5 - 15:30:05.5 97 4 3C391 C3 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:30:06.5 - 15:34:54.5 98 5 3C391 C4 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:34:55.5 - 15:39:43.5 99 6 3C391 C5 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:39:44.5 - 15:44:32.5 100 7 3C391 C6 187850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:44:33.5 - 15:49:22.5 101 8 3C391 C7 188500 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:49:23.5 - 15:51:11.5 102 1 J1822-0938 70850 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary+ 15:51:12.5 - 16:00:10.5 103 9 J0319+4130 350350 1 [0, 1]
| |
| 2010-04-27 19:17:47 INFO listobs::ms::summary (nVis = Total number of time/baseline visibilities per scan)
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary Fields: 10
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ ID Code Name RA Decl Epoch SrcId nVis
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 0 N J1331+3030 13:31:08.2880 +30.30.32.9589 J2000 0 774800
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 1 J J1822-0938 18:22:28.7042 -09.38.56.8350 J2000 1 1361750
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 2 NONE 3C391 C1 18:49:24.2440 -00.55.40.5800 J2000 2 2488850
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 3 NONE 3C391 C2 18:49:29.1490 -00.57.48.0000 J2000 3 2280850
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 4 NONE 3C391 C3 18:49:19.3390 -00.57.48.0000 J2000 4 2282150
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 5 NONE 3C391 C4 18:49:14.4340 -00.55.40.5800 J2000 5 2282150
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 6 NONE 3C391 C5 18:49:19.3390 -00.53.33.1600 J2000 6 2281500
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 7 NONE 3C391 C6 18:49:29.1490 -00.53.33.1600 J2000 7 2281500
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 8 NONE 3C391 C7 18:49:34.0540 -00.55.40.5800 J2000 8 2282150
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ 9 Z J0319+4130 03:19:48.1601 +41.30.42.1030 J2000 9 350350
| |
| 2010-04-27 19:17:51 INFO listobs::ms::summary+ (nVis = Total number of time/baseline visibilities per field)
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary Spectral Windows: (2 unique spectral windows and 1 unique polarization setups)
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ SpwID #Chans Frame Ch1(MHz) ChanWid(kHz)TotBW(kHz) Ref(MHz) Corrs
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 0 64 TOPO 4536 2000 128000 4536 RR RL LR LL
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 1 64 TOPO 7436 2000 128000 7436 RR RL LR LL
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary Sources: 20
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ ID Name SpwId RestFreq(MHz) SysVel(km/s)
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 0 J1331+3030 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 0 J1331+3030 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 1 J1822-0938 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 1 J1822-0938 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 2 3C391 C1 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 2 3C391 C1 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 3 3C391 C2 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 3 3C391 C2 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 4 3C391 C3 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 4 3C391 C3 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 5 3C391 C4 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 5 3C391 C4 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 6 3C391 C5 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 6 3C391 C5 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 7 3C391 C6 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 7 3C391 C6 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 8 3C391 C7 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 8 3C391 C7 1 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 9 J0319+4130 0 - -
| |
| 2010-04-27 19:17:54 INFO listobs::ms::summary+ 9 J0319+4130 1 - -
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary Antennas: 26:
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ ID Name Station Diam. Long. Lat.
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 0 ea01 W09 25.0 m -107.37.25.2 +33.53.51.0
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 1 ea02 E02 25.0 m -107.37.04.4 +33.54.01.1
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 2 ea03 E09 25.0 m -107.36.45.1 +33.53.53.6
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 3 ea04 W01 25.0 m -107.37.05.9 +33.54.00.5
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 4 ea05 W08 25.0 m -107.37.21.6 +33.53.53.0
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 5 ea07 N06 25.0 m -107.37.06.9 +33.54.10.3
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 6 ea08 N01 25.0 m -107.37.06.0 +33.54.01.8
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 7 ea09 E06 25.0 m -107.36.55.6 +33.53.57.7
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 8 ea11 E04 25.0 m -107.37.00.8 +33.53.59.7
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 9 ea12 E08 25.0 m -107.36.48.9 +33.53.55.1
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 10 ea13 N07 25.0 m -107.37.07.2 +33.54.12.9
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 11 ea14 E05 25.0 m -107.36.58.4 +33.53.58.8
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 12 ea15 W06 25.0 m -107.37.15.6 +33.53.56.4
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 13 ea16 W02 25.0 m -107.37.07.5 +33.54.00.9
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 14 ea17 W07 25.0 m -107.37.18.4 +33.53.54.8
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 15 ea18 N09 25.0 m -107.37.07.8 +33.54.19.0
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 16 ea19 W04 25.0 m -107.37.10.8 +33.53.59.1
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 17 ea20 N05 25.0 m -107.37.06.7 +33.54.08.0
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 18 ea21 E01 25.0 m -107.37.05.7 +33.53.59.2
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 19 ea22 N04 25.0 m -107.37.06.5 +33.54.06.1
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 20 ea23 E07 25.0 m -107.36.52.4 +33.53.56.5
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 21 ea24 W05 25.0 m -107.37.13.0 +33.53.57.8
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 22 ea25 N02 25.0 m -107.37.06.2 +33.54.03.5
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 23 ea26 W03 25.0 m -107.37.08.9 +33.54.00.1
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 24 ea27 E03 25.0 m -107.37.02.8 +33.54.00.5
| |
| 2010-04-27 19:18:02 INFO listobs::ms::summary+ 25 ea28 N08 25.0 m -107.37.07.5 +33.54.15.8
| |
| 2010-04-27 19:18:02 INFO listobs::::casa
| |
| 2010-04-27 19:18:02 INFO listobs::::casa ##### End Task: listobs #####
| |
| 2010-04-27 19:18:02 INFO listobs::::casa ##########################################
| |
| </pre>
| |
| | |
| Both to get a sense of the array, as well as identify an antenna for later use in calibration, use the task [[plotants]]. In general, for calibration purposes, one would like to select an antenna that is close to the center of the array (and that is not listed in the operator's log as having had problems!).
| |
| | |
| <source lang="python">
| |
| plotants(vis='3c391_ctm_mosaic_10s.ms',figfile='3c391_ctm_mosaic_antenna_layout.png')
| |
| </source>
| |
| | |
| [[Image:3c391_ctm_plotants_parameters.jpg|200px|thumb|left|plotants parameters]]
| |
| [[Image:3C391_mosaic-plotants.png|200px|thumb|center|plotants figure]]
| |
| | |
| == Examining and Editing the Data ==
| |
| | |
| It is always a good idea, particularly with a new system like the EVLA, to examine the data. Moreover, from the observer's log, we already know that one antenna will need to be flagged because it does not have a C-band receiver. Start by flagging data known to be bad, then examine the data.
| |
| | |
| In its current operation, it is common to insert a dummy scan as the first scan. (From the [[listobs]] output above, one may have noticed that the first scan is only 10 seconds long.) This first scan can safely be deleted.
| |
| <source lang="python">
| |
| flagdata(vis=msname,flagbackup=T,mode='manualflag',selectdata=T,scan='1')
| |
| </source>
| |
| | |
| * flagbackup=T : A comment is warranted on the setting of flagbackup (here set to T or True). If set to True, [[flagdata]] will save a copy of the existing set of flags <em>before</em> entering any new flags. The setting of flagbackup is therefore a matter of some taste. One could choose not to save any flags or only save "major" flags, or one could save every flag. (One of the authors of this document was glad that flagbackup was set to True as he recently ran [[flagdata]] with a typo in one of the entries.)
| |
| * mode='manualflag' : Specific data are going to be selected to be edited.
| |
| * selectdata=T : In order to select the specific data to be flagged, selectdata has to be set to True. Once selectdata is set to True, then the various data selection options become visible (use inp flagdata to see the possible options). In this case, scan='1' is chosen to select only the first scan. Note that scan expects an entry in the form of a <em>string</em>. (scan=1 would generate an error.)
| |
| | |
| If satisfied with the inputs, run this task. The initial display in the logger will include
| |
| <pre style="background-color: #ffe4b5;">
| |
| ##########################################
| |
| ##### Begin Task: flagdata #####
| |
| flagdata::::casa
| |
| attached MS [...]
| |
| Saving current flags to manualflag_2 before applying new flags
| |
| Creating new backup flag file called manualflag_2
| |
| </pre>
| |
| which indicates that, among other things, the flags that existed in the data set prior to this run will be saved to another file called manualflag_2. Should one ever desire to revert to the data prior to this run, the task [[flagmanager]] could be used.
| |
| | |
| | |
| | |
| From the observer's log, we know that antenna 13 does not have a C band receiver, so it should be flagged as well. The parameters are similar as before.
| |
| <source lang="python">
| |
| flagdata(vis=msname,flagbackup=T,mode='manualflag',selectdata=T,antenna='ea13')
| |
| </source>
| |
| * antenna='ea13' : Once again, this parameter requires a string output. Also note that antenna='ea13' and 'antenna='13' are <em>not</em> the same antenna. (Check the output from [[listobs]] above.)
| |
| | |
| | |
| Finally, it is common for the array to require a small amount of time to "settle down" at the start of a scan. Consequently, it has become standard practice to edit out the initial samples from the start of each scan.
| |
| | |
| <source lang="python">
| |
| flagdata(vis='3c391_ctm_mosaic_10s.ms',mode='quack',quackinterval=10.0,quackmode='beg')
| |
| </source>
| |
| * mode='quack' : Quack is another mode in which the same edit will be applied to all scans for all baselines.
| |
| * quackmode='beg' : In this case, data from the start of each scan will be flagged. Other options include flagging data at the end of the scan.
| |
| * quackinterval=10 : In this data set, the sampling time is 10 seconds, so this choice flags the first sample from all scans on all baselines.
| |
| | |
| | |
| Having now done some basic editing of the data, based in part on <i>a priori</i> information, it is time to look at the data to determine if there are any other obvious problems. One task to examine the data themselves is [[plotms]].
| |
| | |
| <source lang="python">
| |
| plotms(vis='3c391_ctm_mosaic_10s.ms',xaxis='',yaxis='',selectdata=True,averagedata=False,transform=False,extendflag=False,plotfile='')
| |
| </source>
| |
| * xaxis=' ', yaxis=' ' : One can choose the axes of the plot, i.e., the way of visualizing the data.
| |
| * selectdata=T : One can choose to plot only subsets of the data.
| |
| * averagedata=F : It is possible to average the data in time, frequency, etc.
| |
| * transform=F : It is possible to change the velocity reference frame of the data.
| |
| * extendflag=F : It is possible to "extend" a flag, i.e., flag data surrounding bad data. For example, one might want to flag spectral channels surrounding a bad spectral channel or one might want to flag cross-polarization data if one flags the parallel polarization data.
| |
| * plotfile=' ' : It is possible to produce a hard copy (e.g., for a paper, report, or Web site) by specifying a file.
| |
| In this case, most of the values have been left to defaults as it is also possible to select them from within the [[plotms]] GUI. Review the inputs, then run the task.
| |
| | |
| [[plotms]] should produce a GUI, with the default view being to show the visibility amplitude as a function of time.
| |
| [[Image:plotms-default.png|200px|right|thumb|plotms default GUI view]]
| |
| [[plotms]] allows one to select and view the data in many ways. Across the top of the right panel are a set of tabs labeled 'Plots', 'Flagging', 'Tools', 'Annotator', and 'Options'. If one selects the 'Flagging' tab, the option is to 'Extend flags'. Thus, even though [[plotms]] was started with extendflag=F, if one decides that it does make sense to extend the flags, one can still do so here.
| |
| | |
| In the default view, the 'Plots' tab is visible, and there are a number of tabs running down the side of the right hand panel, including 'Data', 'Axes', 'Trans', 'Cache', 'Display', 'Canvas', and 'Export'. Once again, one can make changes on the fly. Thus, supposing that one wants to save a hard copy, even if [[plotms]] was started with plotfile=' ', one can select 'Export' and enter a file name in which to save a copy of a plot.
| |
| | |
| One should spend several minutes displaying the data in various formats. For instance, one could select the 'Data' tab and specify field 0 (source J1331+3030, a.k.a. 3C 286) to display data associated with the amplitude calibrator, then select the 'Axes' tab and change the x axis to be UVDist, and plot the data. The result should be that of the first thumbnail image shown below. The amplitude distribution is relatively constant as a function of u-v distance or baseline length (i.e., sqrt[u*u + v*v]). From the various lectures, one should recognize that a relatively constant visibility amplitude as a function of baseline length means that the source is very nearly a point source. (The Fourier transform of a constant is a delta function, a.k.a. a point source.)
| |
| | |
| By contrast, if one selects field 3 (one of the 3C 391 fields) in the 'Data' tab and plots these data, one sees a visibility function that falls rapidly with increasing baseline length. Such a visibility function indicates a highly resolved source. By noting the baseline length at which the visibility function falls to some fiducial value (e.g., 1/2 of its peak value), one can obtain a rough estimate of the angular scale of the source. (From the lectures, angular scale [in radians] ~ 1/baseline [in wavelengths].)
| |
| | |
| | |
| [[Image:plotms-3C286-UVDist_vs_Amp.png|200px|left|thumb|plotms view of 3C 286]]
| |
| [[Image:plotms-3C391-UVDist_vs_Amp.png|200px|center|thumb|plotms view of 3C 391]]
| |
| | |
| | |
| As a general data editing and examination strategy, at this point in the data reduction process, one wants to focus at this stage on the calibrators. The data reduction strategy is to determine various corrections from the calibrators, then apply these correction factors to the science data. The 3C 286 data look relatively clean. There are no wildly egregious data (e.g., amplitudes that are 100,000x larger than the rest of the data). One may notice that there are antenna-to-antenna variations (under the 'Display' tab, select 'Colorize by Antenna1'). These antenna-to-antenna variations are acceptable, that's what calibration will help determine.
| |
| | |
| == Calibrating the data ==
| |
| | |
| It is now time to begin calibrating the data. The general data reduction strategy is to derive a series of scaling factors or corrections from the calibrators, which are then collectively applied to the science data. Recall that the observed visibility V' between two antennas (i,j) is related to the "true" visibility V by
| |
| <pre>
| |
| V'_{i,j}(u,v,f) = b_{ij}(t) * [B_i(f,t) * B*_j(f,t)] * g_i(t) * g_j(t) * V_{i,j}(u,v,f) * exp{i [theta_i(t) - theta_j(t)]}
| |
| </pre>
| |
| Here, for generality, we show the visibility as a function of frequency f and spatial wavenumbers u and v. The other terms are
| |
| * g_i and theta_i are the amplitude and phase portions of what is commonly termed the complex gain. They are shown separately here because they are usually determined separately. For completeness, these are shown as a function of time t to indicate that they can change with temperature, atmospheric conditions, etc.
| |
| * B_i is the complex bandpass. This is clearly a function of frequency f, but, for completeness, it is also shown as a function of time.
| |
| * b(t) is the often-neglected baseline term. It shall be neglected here as well, though it can be important to include for the highest dynamic range images or shortly after a configuration change at the [E]VLA, when antenna positions may not be known well.
| |
| | |
| | |
| The first step is to provide a flux density value for the amplitude calibrator J1331+3030 (a.k.a. 3C 286). For the VLA, the ultimate flux density scale at most frequencies was set by 3C 295, which was then transferred to a small number of "primary flux density calibrators," including 3C 286. For the EVLA, at the time of this writing, the flux density scale at most frequencies will be determined from WMAP observations of the planet Mars, in turn then transferred to a small number of primary flux density calibrators. Thus, the procedure is to assume that the flux density of a primary calibrator source is known and, by comparison with the observed data for that calibrator, determine the g_i values.
| |
| | |
| <source lang="python">
| |
| setjy(vis='3c391_ctm_mosaic_10s.ms',field='J1331+3030',spw='0',
| |
| modimage = '/home/casa/data/nrao/VLA/CalModels/3C286_C.im',standard = 'Perley-Taylor 99',
| |
| fluxdensity = -1)
| |
| </source>
| |
| * field='J1331+3030' : Clearly one has to specify what the flux density calibrator is, otherwise <em>all</em> sources will be assumed to have the same flux density.
| |
| * spw='0' : In this observation, the spectral windows are sufficiently separated that the spectrum of 3C 286 means that the same flux density for the calibrator source cannot be assumed for both. If the spectral windows were much closer together, it might be possible to calibrate both with the same flux density value.
| |
| * modimage='/home/casa/data/nrao/VLA/CalModels/3C286_C.im' : Although above, from plotms, it was estimated that 3C 286 is roughly a point source, depending upon the frequency and configuration, the source may be slightly resolved. Fiducial model images have been determined from a painstaking set of observations, and, if one is available, it should be used to compensate for slight resolution effects. In this case, spectral window 0 (at 4.536 GHz) is in the C band, so the C-band model image is used.
| |
| * standard='Perley-Taylor 99' :
| |
| * fluxdensity=-1 :
| |
| | |
| | |
| <source lang="python">
| |
| setjy(vis='3c391_ctm_mosaic_10s.ms',field='J1331+3030',spw='1',
| |
| modimage = '/home/casa/data/nrao/VLA/CalModels/3C286_X.im',standard = 'Perley-Taylor 99',
| |
| fluxdensity = -1)
| |
| </source>
| |
| Spectral window 1 (at 7.436 GHz) is formally within the C band (4--8 GHz), not the X band (8--12 GHz). A model image at X band is utilized nonetheless, because the actual frequency of spw 1 is much closer to the frequency at which the X band model was made than the C band model.
| |
| | |
| | |
| === Bandpass calibration ===
| |
| <source lang="python">
| |
| gaincal(vis='3c391_ctm_mosaic_10s.ms',caltable='3c391_ctm_mosaic.gcal0',field='J1331+3030',
| |
| refant='ea21',spw='0~1:27~36',calmode='p')
| |
| </source>
| |
| | |
| <source lang="python">
| |
| bandpass(vis='3c391_ctm_mosaic_10s.ms',gaintable='3c391_ctm_mosaic.gcal0',caltable='3c391_ctm_mosaic.bcal0',
| |
| field='J1331+3030',spw='0,1',refant='ea21',solnorm=True,combine='scan',solint='inf',bandtype='B')
| |
| </source>
| |
| | |
| === Gain calibration ===
| |
| <source lang="python">
| |
| gaincal(vis='3c391_ctm_mosaic_10s.ms',caltable='3c391_ctm_mosaic.gcal1',field='J1331+3030',spw='0,1:5~58'
| |
| refant='ea21',gaintype='G',gaintable='3c391_ctm_mosaic.bcal0',calmode='ap',solint='inf')
| |
| </source>
| |
| | |
| <source lang="python">
| |
| gaincal(vis='3c391_ctm_mosaic_10s.ms',caltable='3c391_ctm_mosaic.gcal1',field='J1822-0938,J0319+4130',
| |
| spw='0,1:5~58',refant='ea21',gaintype='G',gaintable='3c391_ctm_mosaic.bcal0',calmode='ap',
| |
| solint='inf',append=True)
| |
| </source>
| |
| | |
| === Polarization calibration ===
| |
| | |
| Now we need to do the polarization calibration. This should be done prior to running [[fluxscale]], since it has to run using the un-rescaled gains in the model data column of the measurement set. Polarization calibration is done in two steps. First, we solve for the instrumental polarization (the frequency-dependent leakage terms, or 'D-terms'), using either an unpolarized source or a source which has sufficiently good parallactic angle coverage. Second, we solve for the polarization position angle using a source with a known polarization position angle (3C 286 is recommended here).
| |
| | |
| Our initial run of [[setjy]] only set the total intensity of our flux calibrator source, 3C 286. This source is [http://www.vla.nrao.edu/astro/calib/polar/ known] to have a fractional polarization of 11.2% at C-band, and a polarization position angle of 66 degrees. In order to calibrate the position angle, we need to set the appropriate values for Stokes Q and U at the two observing frequencies. Examining our casapy.log file to find the output of [[setjy]], we find that the total intensity was set to 7.74664 Jy in the lower spectral window (spw0) and 5.65053 Jy in the upper spectral window (spw1). We therefore use python to find the polarized flux, P, and the values of Stokes Q and U at both frequencies.
| |
| | |
| <source lang="python">
| |
| i0=7.74664
| |
| p0=0.112*i0
| |
| q0=p0*cos(66*pi/180)
| |
| u0=p0*sin(66*pi/180)
| |
| | |
| i1=5.65053
| |
| p1=0.112*i1
| |
| q1=p1*cos(66*pi/180)
| |
| u1=p1*sin(66*pi/180)
| |
| </source>
| |
| | |
| We now set the values of Stokes Q and U for 3C 286 at both frequencies, using [[setjy]] as we did before. This time, however, we do not use the model image.
| |
| | |
| <source lang="python">
| |
| setjy(vis='3c391_ctm_mosaic_10s.ms',field='J1331+3030',modimage='',spw='0',fluxdensity=[i0,q0,u0,0])
| |
| setjy(vis='3c391_ctm_mosaic_10s.ms',field='J1331+3030',modimage='',spw='1',fluxdensity=[i1,q1,u1,0])
| |
| </source>
| |
| | |
| ==== Solving for the leakage terms ====
| |
| | |
| The task we will use to do all the polarization calibration is [[polcal]]. In this data set, we observed the unpolarized source J0319+4130 (i.e. 3C 84) to allow us to solve for the leakages. [[polcal]] uses the Stokes IQU values in the MODEL_DATA column (Q and U being zero for our unpolarized calibrator) to solve for the leakages, and we wish to do this in a frequency-dependent sense, so we set ''poltype='Df' '' (''D'' specifying to solve for the leakages, and ''f'' to do so on a per-channel basis). Had we been solving for the leakages using a calibrator with unknown polarization but with good parallactic angle coverage, we would simultaneously have needed to solve for the source polarization (''poltype='Df+QU' ''). We apply our existing gain and bandpass tables on-the-fly by setting ''gaintable=['3c391_ctm_mosaic.gcal1', '3c391_ctm_mosaic.bcal0']''. [[polcal]] will create a new calibration table containing the leakage solutions, which we specify with the ''caltable'' argument. We wish to solve for both spectral windows (setting ''spw='0,1' ''), and specify the source to be used for the calibration (''field='J0319+4130' ''). The final function call is then:
| |
| | |
| <source lang="python">
| |
| polcal(vis='3c391_ctm_mosaic_10s.ms',caltable='3c391_ctm_mosaic.pcal0',field='J0319+4130',
| |
| spw='0,1',refant='ea21',poltype='Df',gaintable=['3c391_ctm_mosaic.gcal1', '3c391_ctm_mosaic.bcal0'])
| |
| </source>
| |
| | |
| After polcal has finished running, you are strongly advised to examine the solutions with [[plotcal]], to ensure that everything looks good.
| |
| | |
| <source lang="python">
| |
| plotcal(caltable='3c391_ctm_mosaic.pcal0',xaxis='chan',yaxis='amp',spw='0',field='',iteration='antenna')
| |
| </source>
| |
| | |
| This will produce plots similar to that shown below:
| |
| | |
| [[Image:3c391_ctm_plotcal_Df_solutions.jpg|polcal Df solutions from plotcal]]
| |
| | |
| As ever, you can cycle through the antennas by clicking the "Next" button. You should see leakages of between 5 and 15% in most cases.
| |
| | |
| ==== Solving for the R-L polarization angle ====
| |
| | |
| <source lang="python">
| |
| polcal(vis='3c391_ctm_mosaic_10s.ms',caltable='3c391_ctm_mosaic.xcal0',poltype='Xf',
| |
| gaintable=['3c391_ctm_mosaic.gcal1', '3c391_ctm_mosaic.bcal0', '3c391_ctm_mosaic.pcal0']),
| |
| field='J1331+3030',refant='ea21',spw='0,1')
| |
| </source>
| |
| | |
| == Applying the calibration ==
| |
| | |
| <source lang="python">
| |
| fluxscale(vis='3c391_ctm_mosaic_10s.ms',caltable='3c391_ctm_mosaic.gcal1',fluxtable='3c391_ctm_mosaic.fluxscale1',
| |
| reference='J1331+3030',transfer='J1822-0938,J0319+4130',append=True)
| |
| </source>
| |
| | |
| <source lang="python">
| |
| applycal(vis='3c391_ctm_mosaic_10s.ms',
| |
| gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
| |
| parang=True,field='J1331+3030',gainfield=['J1331+3030','','',''],interp=['nearest','','',''])
| |
| | |
| applycal(vis='3c391_ctm_mosaic_10s.ms',
| |
| gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
| |
| parang=True,field='J0319+4130',gainfield=['J0319+4130','','',''],interp=['nearest','','',''])
| |
| | |
| applycal(vis='3c391_ctm_mosaic_10s.ms',
| |
| gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
| |
| parang=True,field='J1822-0938',gainfield=['J1822-0938','','',''],interp=['nearest','','',''])
| |
| </source>
| |
| | |
| Next, we apply the calibration to the target fields in the mosaic, linearly interpolating the gain solutions from the secondary calibrator, J1822-0938. We can select all 7 fields at once (setting ''field='2~8''').
| |
| | |
| <source lang="python">
| |
| applycal(vis='3c391_ctm_mosaic_10s.ms',
| |
| gaintable=['3c391_ctm_mosaic.fluxscale1','3c391_ctm_mosaic.bcal0','3c391_ctm_mosaic.pcal0','3c391_ctm_mosaic.xcal0'],
| |
| parang=True,field='2~8',gainfield=['J1822-0938','','',''],interp=['linear','','',''])
| |
| </source>
| |
| | |
| Once the calibration has been applied to the target data, we can split off the source, creating a new, calibrated measurement set containing all the target fields. In this case, we also split up the data by spectral window, so we can image the two different frequencies separately.
| |
| | |
| <source lang="python">
| |
| split(vis='3c391_mosaic_10s.ms',outputvis='3c391_ctm_mosaic_spw0.ms',datacolumn='corrected',field='2~8',spw='0')
| |
| split(vis='3c391_mosaic_10s.ms',outputvis='3c391_ctm_mosaic_spw1.ms',datacolumn='corrected',field='2~8',spw='1')
| |
| </source>
| |
| | |
| == Imaging and self-calibration ==
| |
| | |
| Now that we have split off your target data into a separate measurement set with all the calibration applied, it's time to make an image. CASA has a single task, [[clean]] which both Fourier transforms the data and deconvolves the resulting image.
| |
| | |
| A command line call to image and deconvolve the dataset would be:
| |
| <source lang="python">
| |
| clean(vis='3c391_ctm_mosaic_spw0.ms',imagename='3c391_ctm_spw0_IQUV',cell=['2.0arcsec','2.0arcsec'],imsize=[576,576],
| |
| mode='mfs',niter=10000,threshold='1.0mJy',stokes='IQUV',psfmode='clarkstokes',
| |
| weighting='briggs',imagermode='mosaic',multiscale=[1,3,10,30,100],mask=[162,177,377,397])
| |
| </source>
| |
| | |
| To image the dataset in all four polarizations (total intensity I, linear polarizations Q and U, and circular polarization V), we set ''stokes='IQUV''', which makes separate images in each polarization. We also set ''psfmode='clarkstokes'', which uses the clark clean algorithm to deconvolve each Stokes plane separately. This makes the polarization image more independent of the total intensity.
| |
| | |
| Since our fractional bandwidth is non-zero (128 MHz at a central frequency of 4.6 GHz), there is a slight improvement in uv-coverage if we do not average all channels together. Our dataset consists of multiple spectral channels, whose data we wish to combine into a single image, gridding each channel separately. We therefore set ''mode='mfs'''.
| |
| | |
| We need to select the appropriate pixel size to use. Using plotms to look at the newly-calibrated, target-only data set:
| |
| <source lang="python">
| |
| plotms(vis='3c391_ctm_mosaic_spw0.ms')
| |
| </source>
| |
| we select the axes tab on the left hand side, and select UVDist_L as the x-axis. This gives the plot shown below
| |
| [[Image:3c391 ctm spw0 uvplt.jpg|3C391 4600MHz Amplitude vs UV Distance in wavelengths]]
| |
| | |
| The maximum baseline shown corresponds to about 16,000 wavelengths, i.e. an angular scale of 12 arcseconds (<math>\lambda/D=1/16000</math>). Since we wish to have a number of pixels across a resolution element, we then select a pixel size of 2 arcseconds in both co-ordinates by setting ''cell=['2.0arcsec','2.0arcsec']''. The supernova remnant is known to have a diameter of order 9 arcmin, which corresponds to about 270 pixels. To prevent image artifacts arising from aliasing, we wish to keep the emission region to roughly the inner quarter of the image. The Fourier transform is most efficient if the number of pixels on a side is a composite number divisible by 2 and 3 and/or 5. We choose 576, which is <math>2^6\times3^2</math>, and is close to <math>2\times270</math>. We therefore set ''imsize=[576,576]''.
| |
| | |
| Since 3C 391 has diffuse, extended emission which is being resolved out by the interferometer owing to a lack of short spacings, a naturally-weighted image would show large-scale patchiness in the noise. In order to suppress this effect, we select Briggs weighting (intermediate between natural and uniform weighting), with a default robust factor of 0 (setting ''weighting='briggs''').
| |
| | |
| Our data consists of a 7-pointing mosaic, since the supernova remnant fills almost the full primary beam at 4.6 GHz. We therefore wish to perform a joint deconvolution on all 7 fields, which we do simply by setting ''imagermode='mosaic''', and using the default mosaic parameters.
| |
| | |
| Because the supernova remnant contains both diffuse, extended structure on large spatial scales, and also finer filamentary structure on smaller scales, we use the multiscale clean algorithm, which removes clean components which are circular Gaussians as well as delta functions. We set a logarithmically-spaced range of spatial scales to use for the widths of the Gaussian components, which we specify in pixels. To do this, we set ''multiscale=[1,3,10,30,100]''.
| |
| | |
| To prevent the clean algorithm finding spurious components on noise peaks, especially at the larger scales in the multiscale clean, we set a region within which the task will search for clean components, using ''mask=[162,177,377,397]'', which encompasses the observed emission (we can get a rough idea of where the bulk of the emission lies by running clean once with no deconvolution, i.e. ''niter=0'', to make a dirty image, which we can then inspect with the [[viewer]] to locate the emission regions). To prevent overcleaning, we wish to stop the deconvolution when we have reached a residual flux level of 1 mJy (setting ''threshold='1.0mJy'''), or when we have generated 10000 clean components (setting ''niter=10000'').
| |
| | |
| [[clean]] will make several output files, all named with the prefix given as ''imagename''. These include:
| |
| * .image - the final restored image, with the clean components convolved with a restoring beam and added to the remaining residuals at the end of the imaging process
| |
| * .flux - the effective response of the telescope (the primary beam)
| |
| * .flux.pbcoverage - the effective response of the full mosaic image
| |
| * .mask - the areas where you have permitted imager to find clean components
| |
| * .model - the sum of all the clean components, which has been stored as the model_data column in the measurement set
| |
| * .psf - the dirty beam, which is being deconvolved from the true sky brightness during the clean process
| |
| * .residual - what is left at the end of the deconvolution process; this is useful to diagnose whether or not to clean more deeply
| |
| | |
| After the imaging and deconvolution process has finished, you can use the [[viewer]] to look at your image.
| |
| | |
| <source lang="python">
| |
| viewer('3c391_ctm_spw0_IQUV.image')
| |
| </source>
| |
| | |
| This will bring up a viewer window containing the image, which should look similar to that shown below. The tape deck buttons that you see under the image can be used to step through the different Stokes parameters (I,Q,U,V). You can adjust the color scale and zoom in to a selected region by assigning mouse buttons to the icons immediately above the image (hover over the icons to get a description of what they do).
| |
| | |
| [[Image:3c391_ctm_i_image.jpg|3C391 4600MHz Stokes I mosaic]]
| |
| | |
| Note that the image is cut off in a circular fashion at the edges, corresponding to the default minimum primary beam response within [[clean]] of 0.2.
| |
