CASA EVLA Scripts

From CASA Guides
Jump to navigationJump to search


Overview

This is a collection of Python scripts to help process and analyze EVLA data. Although they are not officially supported, some authors may choose to provide contact information. A brief description on how to run each script is provided by the author. If you would like to contribute, and do not have access to the CASA Guides Wiki, you may email Miriam Krauss (mkrauss at nrao.edu).

Plotting the weather table, obtaining observation-specific opacity information

plotWX weather table figure

Download script: File:Script plotWX.py

This script will plot weather information contained in the MS (see example below) as well as estimate the zenith opacity for each spectral window. This script is only intended for use with the EVLA-- it contains hardcoded site parameters and EVLA-specific models. Feel free to contact Josh Marvil (jmarvil + 'at' + nrao.edu) with questions or comments.


The plot will contain the following subfigures:

  • The Sun's elevation, calculated from the date and time of the observation
  • Wind speed and direction, as read from the weather table
  • Temperature and Dewpoint, as read from the weather table
  • Estimates of Precipitable Water Vapor (PWV), based upon:
    • A Seasonal model based on VLA measurements between 1998-2005 (See VLA Test Memo #232)
    • A calculation involving temperature and dewpoint (See VLA Scientific Memo #176)
    • The average of the above two methods (currently accepted as the best predictor)
  • Zenith optical depth from 1-50 GHz, calculated for each of the above three estimates of PWV, averaged over time. This calculation uses the atmospheric toolkit available within casa (see help(at) within CASA for more info)


This can be run from within CASA as a Script in the following way:

  1. place Script_plotWX.py in your working directory
  2. open Script_plotWX.py in a text editor
  3. find this line near the top of the script: myMS='MSname.ms'
  4. replace MSname.ms with the name of your measurement set, and save
  5. in CASA, execute the script:


# In CASA
execfile 'Script_plotWX.py'


Or, this script can be run within CASA as a function:

  1. place Script_plotWX.py in your working directory
  2. in CASA, import the function definition and call the function, replacing MSname.ms with the name of your measurement set:


# In CASA
from Script_plotWX import plotWX
myTau = plotWX('MSname.ms')

Mosaicking Utilities

User beware: these are tested but not thoroughly vetted scripts provided without any guarantee.

These are two potentially useful scripts ("buildmosaic" and "buildfluxmap") to aid in mosaic planning. A full-fledged GUI mosaic tool is under development by EVLA staff and RSRO participants but in the meantime these may be useful. They have been used but not heavily tested - please email aleroy at nrao dot edu to suggest improvements or report bugs (or just to report use, if people actually use these then I'll happily wrap it up in the XML for a task and strnegthen the error-checking).

buildmosaic

ds9 region output of "buildmosaic" overlaid on M31 IR map.
CASA viewer image of the mask "mask_m31.im" used to constrain the above mosaic.

"buildmosaic" allows users to specify a hexagonally packed mosaic and then outputs this mosaic as a text file in one of three formats: EVLA proposal submission tool, simdata pointing file, or ds9 region file. "buildmosaic" is a python routine. To use it, make sure that "buildmosaic.py", "axisutils.py", "constutils.py", and "geoutils.py" all sit in your casapy path (the easiest way to do this is to just drop them into your working directory). Then type

# In CASA
from buildmosaic import buildmosaic

then you can call "buildmosaic". Our test example was to build a large 2 GHz mosaic of M31 and the syntax we used to build this was something like this:

# In CASA
m31_dir = "00h42m44.3s +41d16m09s"
buildmosaic(direction=m31_dir,
               format="evlapst",
               outfile="m31.pst",
               overwrite=True,
               freq=2.0e9, 
               diam=25.0, 
               posang=12.0,
               beamspacing=0.5,
               calcspacing=True,
               maxrad=10.0,
               mask="mask_m31.im",
               sourceroot="M31FIELD_",
               groupname="M31MOSAIC")

This long list of parameters tells "buildmosaic" how to build a hexagonally sampled mosaic - the center, spacing, orientation, and maximum extent - potentially subject to some spatial mask (an image of 1s and 0s, "buildmosaic" keeps only points coincident with a 1) and how to output the data to a text file.

The options to specify the mosaic itself are:

  • "direction" specifies the center of the mosaic as a string.
  • "mask" supplies an optional CASA image containing only 1s and 0s. Only pointings inside the mask are kept (this is an important feature!).
  • "calcspacing" asks the program to calculate the spacing between mosaic points from the frequency and diameter of the telescope.
    • "freq" gives the observing frequency in Hz (used to calculate the primary beam).
    • "diam" gives the diameter of the telescope.
    • "beamspacing" dictates the spacing of pointing centers in units of the FWHM of the primary beam.
  • "spacing_deg" specifies the spacing in degrees (if you don't use "calcspacing").
  • "posang" tilts the hexagonal pattern by this position angle.
  • "maxrad" gives the maximum distance from the center (in degrees) for a pointing to be considered.

The ouput file is specified by

  • "outfile" specifies the text file output.
    • "overwrite" the file if present?
    • "format" specifies the output format ("evlapst", "simdata", or "ds9") of the output file.
    • "sourceroot", "groupname", etc. just feed to the output (specifically when using the PST format). Experiment to see these in use and have a look inside "buildmosaic.py" to see the other options that can be passed to a text file (a ds9 tag, velocity frame, etc.).

buildfluxmap