ALMA Imaging Pipeline Reprocessing Tool

Cycle Compatibility

In Cycle 9, a new nomenclature was adopted for measurement sets within the ALMA pipeline: uid*targets.ms for the continuum + line (non-continuum-subtracted) target-only data, and uid*targets_line.ms to reference the continuum subtracted data. Data restored with a scriptForPI.py from prior to Cycle 9 will have an incompatible uid*target.ms format, and must be modified to uid*targets.ms to work with the scripts provided here.

Preparing Data

Starting in Cycle 9, the North American ARC began providing restored calibrated data as an added value product in a calibrated_final/ directory structure. In value added deliveries from previous cycles, the continuum + line data was split and concatenated into the delivered calibrated_final.ms, but this measurement set could no longer be used with pipeline tasks, and the spectral window numbering was lost, which made it difficult to compare against the pipeline weblog.

In the new delivery structure, detailed below, all uid*targets.ms files are held within calibrated_final/measurement_sets, allowing the use of pipeline tasks and making for easier comparison with the delivered ALMA calibration + imaging pipeline weblog. An equivalent calibrated_final.ms can be created via 'concat' in CASA if this is desired.

   calibrated_final/                         # downloaded as calibrated_final.tgz
       caltables/                            # holds relevant calibration information for continuum subtraction
           - cont.dat                        # contains the identified continuum ranges from 'findcont' in the ALMA pipeline
           - uid*SOURCE.uvcont.tbl           # the tables for uv continuum subtraction, generated from 'uvcontfit'
       measurement_sets/                     # holds all measurement sets
           - uid*targets.ms                  # the non-continuum-subtracted measurement sets, per execution block
       - scriptForReprocessing.py            # the tool described on this page

For data downloaded from the ALMA Science Archive, it must first be restored using scriptForPI.py and then placed into a compatible directory structure to work with the scriptForReprocessing.py imaging tool. The script reprocessing_prep.py below should be run to do this.

# run this script within the working/ directory to create a calibrated_final/ directory, mirroring the NA added value delivery structure.
# once calibrated_final/ is created, place scriptForReprocessing.py in calibrated_final/ and follow the scriptForReprocessing.py instructions

import glob
import os
import sys

# Check if calibrated_final/ already exists:
if glob.glob("calibrated_final"):
    print("ERROR: calibrated_final/ already exists; will not overwrite")
    sys.exit()
else:
    os.mkdir("calibrated_final")

# Fill the caltables
os.mkdir("calibrated_final/caltables")
os.system("cp -rf cont.dat calibrated_final/caltables")
os.system("cp -rf *uvcont.tbl calibrated_final/caltables")

# Fill the measurement_sets
os.mkdir("calibrated_final/measurement_sets")
# First try just uid*targets.ms
os.system("cp -rf uid*targets.ms calibrated_final/measurement_sets/")
# Then try uid*targets_line.ms
os.system("cp -rf uid*targets_line.ms calibrated_final/measurement_sets/")

print("Generated calibrated_final/ and filled caltables/ and measurement_sets/. Please place scriptForReprocessing.py in calibrated_final/ and follow README instructions.")

About the Imaging Pipeline Reprocessing Tool - scriptForReprocessing.py

scriptForReprocessing.py is intended to be a convenient wrapper for many of the ALMA imaging pipeline functions (including continuum subtraction) that users may wish to use on their NA delivered value-added products. See the [| ALMA Pipeline Users Guide and Reference Manual] for a full description of the ALMA pipeline.

The script can be launched via CASA with any version of CASA that includes the ALMA pipeline from Cycle 9 or later. See the above link for a mapping of ALMA Cycle, CASA version, and Pipeline version. Thus it should be launched as:

$ casa --pipeline -c scriptForReprocessing.py [options]

optional arguments:

 -h, --help            show this help message and exit
 --contsub             Fit and subtract continuum using the channel ranges from the local
                       cont.dat file. Generates new *uvcont.tbl tables in working_reprocess/
                       directory and uid*targets_line.ms in measurement_sets/
 --contsub_fast        Continuum subtract data via uvcontsub and the local *uvcont.tbl files, but
                       only using the CASA commands rather than pipeline calls (faster).
                       Generates uid*targets_line.ms in measurement_sets/
 --image [IMAGE]       Run the imaging pipeline and place images in the specified directory
                       (default='images'). NOTE: unless cont.dat or the imaging options in this
                       script are modified, the images produced will be identical to those on the
                       ALMA Science Archive
 --cleanup             Remove working_reprocess/ directory and log files after any other options
                       are executed. WARNING: removes weblogs inside of working_reprocess/
 --weblog [WEBLOG]     Launches a browser to view weblog after other tasks are run. By default
                       ('latest'), displays the latest weblog generated locally. Other options
                       are to use the specific pipeline folder name (e.g.
                       'pipeline-20221010T192458')
 --calibrated_final    Concatenate uid*targets.ms to produce calibrated_final.ms in
                       measurement_sets/
 --calibrated_final_line
                       Concatenate uid*targets_line.ms (if they exist) to produce
                       calibrated_final_line.ms in measurement_sets/

Suggested Workflows

A number of workflows are supported with the data organized in the directory structure detailed above:

- You can proceed with your scientific analysis starting with the uid*targets.ms files and supply them to CASA tasks such 
 as tclean, uvcontsub, or gaincal as a list (vis=['MS1.ms', 'MS2.ms', etc]). Examining the casa commands for each stage of
 the delivered ALMA calibration + imaging weblog will give examples of this (e.g. you can get the tclean command for any
 image that was made by clicking within the relevant hif_makeimages() stage).

- You can use scriptForReprocessing.py to restore the continuum subtracted data, re-image the data in the ALMA pipeline
 using new imaging parameters, or view the weblog (see below for usage). Here you can also easily modify cont.dat and
 rerun the continuum subtraction and/or imaging with a different continuum selection.

- You can generate the old style calibrated_final.ms either using scriptForReprocessing.py, or by hand via concat(). If you
 use scriptForReprocessing.py, there is also an option to generate an analogous calibrated_final_line.ms.