M100 Band3 ACA 4.2.2: Difference between revisions

From CASA Guides
Jump to navigationJump to search
Ahiguchi (talk | contribs)
No edit summary
Ahiguchi (talk | contribs)
Line 1,275: Line 1,275:


<figure id="bandpass.CM02.png">
<figure id="bandpass.CM02.png">
[[File:bandpass.CM02.png|200px|thumb|right|<caption> Bandpass amplitude ad phase solution for the first set of antennas and the first data set.</caption>]]
[[File:bandpass.CM02.png|200px|thumb|right|<caption> Bandpass amplitude ad phase solution for CM02 and the first data set.</caption>]]
</figure>
</figure>


Line 1,283: Line 1,283:


<figure id="bandpass_freq_phase.png">
<figure id="bandpass_freq_phase.png">
[[File:bandpass_freq_phase.png|200px|thumb|right|<caption> Bandpass phase solution for the first set of antennas and the first data set.</caption>]]
[[File:bandpass_freq_phase.png|200px|thumb|right|<caption> Bandpass phase solution for the rest antennas and the first data set.</caption>]]
</figure>
</figure>



Revision as of 14:22, 17 June 2013

  • Details of the ALMA observations are provided at M100_Band3
  • This portion of the guide covers calibration of the raw visibility data. To skip to the imaging portion of the guide, see: M100_Band3_Combine_4.1.


Overview

This part of the M100 Band 3 7m CASA guide will step you through the calibration of the visibility data. We will begin by flagging (marking as bad) data known to be useless before any inspection, for example data where one telescope blocks the line of sight of another. Then we will apply telescope-generated calibration tables to partially correct for atmospheric effects. After inspecting the data, we will flag some additional data that exhibit pathologies. Then we will use observations of the calibrators Titan, 3c273, and J1215+1654 to derive the phase and amplitude response of individual antennas as a function of time and frequency ("phase", "amplitude", and "bandpass" calibrations). We will apply these to the data and then extract the calibrated source data into a file appropriate for imaging.

The general procedure in this guide follows the other ALMA CASA guides: NGC3256Band3 and TWHydraBand7.

Unpack the Data

Once you have downloaded the M100_Band3_7m_CalibratedData.tgz, unpack the file in a terminal outside CASA using

tar -xvzf M100_Band3_7m_CalibratedData.tgz

then change directory to the new directory

cd M100_Band3_7m_CalibratedData

You may wish to type

ls

to look at the files present. You should see a set of files with extension ".ms". These are CASA measurement set (MS) files. The data have already been converted to MS format from the native ALMA format using the CASA task importasdm. In addition to the data, we provide you with calibration tables containing system temperature (Tsys), and antenna position information.

This guide requires Python module analysisUtils. If you have not already installed analysisUtils please follow the link to do so.

To begin, start CASA by typing

casapy

Be sure that you are using the version indicated at the top of this page.

Confirm your version of CASA

This guide has been written for CASA release 4.1.0. Please confirm your version before proceeding.

# In CASA
version = casadef.casa_version
print "You are using " + version
if (version < '4.1.0'):
    print "YOUR VERSION OF CASA IS TOO OLD FOR THIS GUIDE."
    print "PLEASE UPDATE IT BEFORE PROCEEDING."
else:
    print "Your version of CASA is appropriate for this guide."

Install Analysis Utilities

Analysis Utilities (or analysisUtils for short) is a small set of Python scripts that provide a number of analysis and plotting utilities for ALMA data reduction. This guide uses a few of these utilities. They are very easy to install (just download and untar). See

http://casaguides.nrao.edu/index.php?title=Analysis_Utilities

for a full description and download instructions. Analysis Utilities are updated frequently so if its been a while since you installed it, its probably worth doing it again. If you are at an ALMA site or ARC, the analysis utilities are probably already installed and up to date.


Initial Inspection

First we will take stock of what we have. If you have not already done so, begin by reviewing the description of the observations here: M100_Band3. The 6 data sets each target mosaic, as follows:

  • uid___A002_X5e971a_X124.ms
  • uid___A002_X5e971a_X2e7.ms
  • uid___A002_X5e9ff1_X3f3.ms
  • uid___A002_X5e9ff1_X5b3.ms
  • uid___A002_X60b415_X44.ms
  • uid___A002_X62f759_X4eb.ms

The first step is to get basic information about the data: targets observed, time range, spectral setup, and so on. We do this using the task listobs, which will output a detailed summary of each dataset. Enter the following commands into CASA:

# In CASA

# Define a python list holding the names of all of our data sets
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

# Initialize user-input string.  (for Python testing)
dummy_string = ''

# Loop over each element in the list and create summary file using listobs
for asdm in basename:
    os.system('rm '+asdm+'.listobs.txt')
    listobs(vis=asdm+'.ms', listfile=asdm+'.listobs.txt', verbose=True)

Note that after cutting and pasting a 'for' loop like this you often have to press return twice to execute. You may also want to take care to paste a line at a time if you are having trouble copy and pasting. Even better, you can use "cpaste" to paste blocks of code. To do so type "cpaste" at the CASA prompt, paste your commands, and then type "--" and hit return on the final (otherwise empty) line. This should look something like this:


CASA <8>: cpaste
Pasting code; enter '--' alone on the line to stop.
:basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']
:
:for asdm in basename:
:    print asdm
:--
uid___A002_X5e971a_X124
uid___A002_X5e971a_X2e7
uid___A002_X5e9ff1_X3f3
uid___A002_X5e9ff1_X5b3
uid___A002_X60b415_X44
uid___A002_X62f759_X4eb

CASA <9>: 

cpaste should be much more robust than copying-and-pasting directly into the shell but if you have trouble, just carefully paste one line at a time directly into CASA and hit return until the desired command executes.

These commands define a python list called "basename", which contains the name of all 6 MS files. The "for" loop executes for each element in basename, calling listobs and directing the output to a file called, e.g., "uid___A002_X5e971a_X124.ms.listobs.txt" for the first measurement set. You can browse through the listobs output as you would normally look at a text file (use emacs, vi, or another editor). You can also send the output to the terminal from inside of CASA. To do so type:

# In CASA
os.system('cat uid___A002_X5e971a_X124.ms.listobs.txt')

or

# In CASA
os.system('more uid___A002_X5e971a_X124.ms.listobs.txt')

CASA knows a few basic shell commands like 'cat', 'ls', and 'rm' but for more complex commands you will need to run them inside 'os.system("command")'. For more information see http://casa.nrao.edu/ .

Here is an example of the (abridged) output from listobs for the first dataset in the list, uid___A002_X5e971a_X124.ms. You would see this if you had specified verbose to be False in the listobs call:

================================================================================
           MeasurementSet Name:  /lustre/naasc/almauser/M100Band3/uid___A002_X5e971a_X124.ms      MS Version 2
================================================================================
Observer: cvlahakis     Project: uid://A002/X5d9e5c/X5d  
Observation: ALMA
Data records: 940680       Total integration time = 5436.77 seconds
Observed from   17-Mar-2013/04:07:32.8   to   17-Mar-2013/05:38:09.6 (UTC)

ObservationID = 0         ArrayID = 0
Date        Timerange (UTC)          Scan  FldId FieldName           nRows   nUnflRows   SpwIds   Average Interval(s)    ScanIntent
17-Mar-2013/04:07:32.3 - 04:09:35.4     1      0 J1229+0203            43200  43200.00  [0, 1, 2, 3, 4, 5, 6, 7]  [1.01, 1.01, 1.01, 1.01, 1.01, 1.01, 1.01, 1.01] CALIBRATE_POINTING#ON_SOURCE
              04:10:57.2 - 04:11:57.7     2      0 J1229+0203            45360  45360.00  [8, 9, 10, 11, 12, 13, 14, 15]  [0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48] CALIBRATE_SIDEBAND_RATIO#ON_SOURCE
              04:12:48.5 - 04:14:00.0     3      0 J1229+0203            12960  12960.00  [8, 9, 10, 11, 12, 13, 14, 15]  [0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48] CALIBRATE_ATMOSPHERE#ON_SOURCE
              04:14:44.2 - 04:24:49.9     4      0 J1229+0203           118800  44880.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_BANDPASS#ON_SOURCE
              04:25:53.4 - 04:27:56.4     5      1 J1445-1629            43200  43200.00  [0, 1, 2, 3, 4, 5, 6, 7]  [1.01, 1.01, 1.01, 1.01, 1.01, 1.01, 1.01, 1.01] CALIBRATE_POINTING#ON_SOURCE
              04:29:02.6 - 04:30:13.9     6      2 Titan                 12960  12960.00  [8, 9, 10, 11, 12, 13, 14, 15]  [0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48] CALIBRATE_ATMOSPHERE#ON_SOURCE
              04:30:57.7 - 04:36:00.5     7      2 Titan                 59400  22468.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_AMPLI#ON_SOURCE
              04:37:10.1 - 04:39:13.2     8      3 J1215+1654            43200  43200.00  [0, 1, 2, 3, 4, 5, 6, 7]  [1.01, 1.01, 1.01, 1.01, 1.01, 1.01, 1.01, 1.01] CALIBRATE_POINTING#ON_SOURCE
              04:39:58.8 - 04:40:59.3     9      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              04:42:08.6 - 04:43:20.0    10      4 M100                  12960  12960.00  [8, 9, 10, 11, 12, 13, 14, 15]  [0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48] CALIBRATE_ATMOSPHERE#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11      5 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11      6 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11      7 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11      8 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11      9 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11     10 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11     11 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11     12 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11     13 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11     14 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11     15 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11     16 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:44:04.3 - 04:50:43.7    11     17 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:51:04.3 - 04:52:04.8    12      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13      5 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13      6 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13      7 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     18 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     19 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     20 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     21 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     22 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     23 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     24 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     25 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     26 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     27 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:59:35.7 - 05:00:36.2    14      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              05:01:55.1 - 05:03:06.5    15      4 M100                  12960  12960.00  [8, 9, 10, 11, 12, 13, 14, 15]  [0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48] CALIBRATE_ATMOSPHERE#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16      8 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16      9 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     10 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     11 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     12 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     13 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     14 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     15 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     16 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     17 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     18 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     19 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     20 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:10:50.7 - 05:11:51.2    17      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      5 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      6 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      7 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      8 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      9 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     10 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     21 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     22 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     23 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     24 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     25 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     26 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     27 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:19:22.0 - 05:20:22.6    19      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     20 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     21 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     22 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     23 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     24 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     25 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     26 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:52:35.8 - 04:59:15.3    13     27 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              04:59:35.7 - 05:00:36.2    14      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              05:01:55.1 - 05:03:06.5    15      4 M100                  12960  12960.00  [8, 9, 10, 11, 12, 13, 14, 15]  [0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48] CALIBRATE_ATMOSPHERE#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16      8 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16      9 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     10 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     11 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     12 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     13 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     14 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     15 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     16 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     17 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     18 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     19 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:03:22.2 - 05:10:01.6    16     20 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:10:50.7 - 05:11:51.2    17      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      5 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      6 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      7 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      8 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18      9 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     10 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     21 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     22 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     23 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     24 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     25 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     26 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:12:22.0 - 05:19:01.4    18     27 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:19:22.0 - 05:20:22.6    19      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              05:21:41.7 - 05:22:53.4    20      4 M100                  12960  12960.00  [8, 9, 10, 11, 12, 13, 14, 15]  [0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48, 0.48] CALIBRATE_ATMOSPHERE#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     11 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     12 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     13 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     14 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     15 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     16 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     17 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     18 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     19 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     20 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     21 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     22 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:23:37.6 - 05:30:17.0    21     23 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:30:37.5 - 05:31:38.1    22      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23      5 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23      6 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23      7 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23      8 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23      9 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23     24 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23     25 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23     26 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:32:08.4 - 05:36:44.7    23     27 M100                   5940   2244.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] OBSERVE_TARGET#ON_SOURCE
              05:37:09.6 - 05:38:10.1    24      3 J1215+1654            11880   4488.00  [16, 17, 18, 19, 20, 21, 22, 23]  [10.1, 1.01, 10.1, 1.01, 10.1, 1.01, 10.1, 1.01] CALIBRATE_PHASE#ON_SOURCE
           (nRows = Total number of rows per scan) 


Fields: 28
  ID   Code Name                RA               Decl           Epoch   SrcId    nRows  nUnflRows
  0    none J1229+0203          12:29:06.699720 +02.03.08.59820 J2000   0       220320  146400.00
  1    none J1445-1629          14:45:53.376290 -16.29.01.61880 J2000   1        43200   43200.00
  2    none Titan               14:36:50.919019 -12.33.38.18202 J2000   1        72360   35428.00
  3    none J1215+1654          12:15:03.979130 +16.54.37.95700 J2000   2       126360   74616.00
  4    none M100                12:22:54.899040 +15.49.20.57160 J2000   2        38880   38880.00
  5    none M100                12:22:57.009007 +15.49.13.60358 J2000   3        23760    8976.00
  6    none M100                12:22:57.009041 +15.49.58.08112 J2000   3        23760    8976.00
  7    none M100                12:22:54.339884 +15.47.22.41016 J2000   3        23760    8976.00
  8    none M100                12:22:54.339918 +15.48.06.88770 J2000   3        23760    8976.00
  9    none M100                12:22:54.339952 +15.48.51.36524 J2000   3        23760    8976.00
  10   none M100                12:22:54.339986 +15.49.35.84278 J2000   3        17820    6732.00
  11   none M100                12:22:54.340020 +15.50.20.32032 J2000   3        17820    6732.00
  12   none M100                12:22:51.670863 +15.47.44.64936 J2000   3        17820    6732.00
  13   none M100                12:22:51.670897 +15.48.29.12690 J2000   3        17820    6732.00
  14   none M100                12:22:51.670931 +15.49.13.60444 J2000   3        17820    6732.00
  15   none M100                12:22:51.670966 +15.49.58.08198 J2000   3        17820    6732.00
  16   none M100                12:22:49.001808 +15.47.22.41102 J2000   3        17820    6732.00
  17   none M100                12:22:49.001842 +15.48.06.88856 J2000   3        17820    6732.00
  18   none M100                12:22:49.001876 +15.48.51.36610 J2000   3        17820    6732.00
  19   none M100                12:22:49.001911 +15.49.35.84364 J2000   3        17820    6732.00
  20   none M100                12:22:49.001945 +15.50.20.32118 J2000   3        17820    6732.00
  21   none M100                12:22:59.677959 +15.47.22.40931 J2000   3        17820    6732.00
  22   none M100                12:22:59.677993 +15.48.06.88685 J2000   3        17820    6732.00
  23   none M100                12:22:59.678027 +15.48.51.36439 J2000   3        17820    6732.00
  24   none M100                12:22:59.678061 +15.49.35.84193 J2000   3        17820    6732.00
  25   none M100                12:22:59.678095 +15.50.20.31947 J2000   3        17820    6732.00
  26   none M100                12:22:57.008938 +15.47.44.64850 J2000   3        17820    6732.00
  27   none M100                12:22:57.008973 +15.48.29.12604 J2000   3        17820    6732.00
Spectral Windows:  (24 unique spectral windows and 1 unique polarization setups)
  SpwID  Name                           #Chans   Frame   Ch1(MHz)  ChanWid(kHz)  TotBW(kHz) BBC Num  Corrs  
  0      ALMA_RB_03#BB_1#SW-01#FULL_RES    124   TOPO   91955.512    -15625.000   1937500.0       1  XX  YY
  1      ALMA_RB_03#BB_1#SW-01#CH_AVG        1   TOPO   90986.762   1937500.000   1937500.0       1  XX  YY
  2      ALMA_RB_03#BB_2#SW-01#FULL_RES    124   TOPO   93893.012    -15625.000   1937500.0       2  XX  YY
  3      ALMA_RB_03#BB_2#SW-01#CH_AVG        1   TOPO   92924.262   1937500.000   1937500.0       2  XX  YY
  4      ALMA_RB_03#BB_3#SW-01#FULL_RES    124   TOPO  102033.637     15625.000   1937500.0       3  XX  YY
  5      ALMA_RB_03#BB_3#SW-01#CH_AVG        1   TOPO  102986.762   1937500.000   1937500.0       3  XX  YY
  6      ALMA_RB_03#BB_4#SW-01#FULL_RES    124   TOPO  104033.637     15625.000   1937500.0       4  XX  YY
  7      ALMA_RB_03#BB_4#SW-01#CH_AVG        1   TOPO  104986.762   1937500.000   1937500.0       4  XX  YY
  8      ALMA_RB_03#BB_1#SW-01#FULL_RES    128   TOPO  101942.187    -15625.000   2000000.0       1  XX  YY
  9      ALMA_RB_03#BB_1#SW-01#CH_AVG        1   TOPO  100926.562   1781250.000   1781250.0       1  XX  YY
  10     ALMA_RB_03#BB_2#SW-01#FULL_RES    128   TOPO  103757.337    -15625.000   2000000.0       2  XX  YY
  11     ALMA_RB_03#BB_2#SW-01#CH_AVG        1   TOPO  102741.712   1781250.000   1781250.0       2  XX  YY
  12     ALMA_RB_03#BB_3#SW-01#FULL_RES    128   TOPO  111814.962     15625.000   2000000.0       3  XX  YY
  13     ALMA_RB_03#BB_3#SW-01#CH_AVG        1   TOPO  112783.712   1781250.000   1781250.0       3  XX  YY
  14     ALMA_RB_03#BB_4#SW-01#FULL_RES    128   TOPO  113689.962     15625.000   2000000.0       4  XX  YY
  15     ALMA_RB_03#BB_4#SW-01#CH_AVG        1   TOPO  114658.712   1781250.000   1781250.0       4  XX  YY
  16     ALMA_RB_03#BB_1#SW-01#FULL_RES   4080   TOPO  101945.850      -488.281   1992187.5       1  XX  YY
  17     ALMA_RB_03#BB_1#SW-01#CH_AVG        1   TOPO  100949.756   1992187.500   1992187.5       1  XX  YY
  18     ALMA_RB_03#BB_2#SW-01#FULL_RES   4080   TOPO  103761.000      -488.281   1992187.5       2  XX  YY
  19     ALMA_RB_03#BB_2#SW-01#CH_AVG        1   TOPO  102764.906   1992187.500   1992187.5       2  XX  YY
  20     ALMA_RB_03#BB_3#SW-01#FULL_RES   4080   TOPO  111811.300       488.281   1992187.5       3  XX  YY
  21     ALMA_RB_03#BB_3#SW-01#CH_AVG        1   TOPO  112806.906   1992187.500   1992187.5       3  XX  YY
  22     ALMA_RB_03#BB_4#SW-01#FULL_RES   4080   TOPO  113686.300       488.281   1992187.5       4  XX  YY
  23     ALMA_RB_03#BB_4#SW-01#CH_AVG        1   TOPO  114681.906   1992187.500   1992187.5       4  XX  YY


Sources: 80
  ID   Name                SpwId RestFreq(MHz)  SysVel(km/s) 
  0    J1229+0203          0     -              -            
  0    J1229+0203          1     -              -            
  0    J1229+0203          2     -              -            
  0    J1229+0203          3     -              -            
  0    J1229+0203          4     -              -            
  0    J1229+0203          5     -              -            
  0    J1229+0203          6     -              -            
  0    J1229+0203          7     -              -            
  0    J1229+0203          8     -              -            
  0    J1229+0203          9     -              -            
  0    J1229+0203          10    -              -            
  0    J1229+0203          11    -              -            
  0    J1229+0203          12    -              -            
  0    J1229+0203          13    -              -            
  0    J1229+0203          14    -              -            
  0    J1229+0203          15    -              -            
  0    J1229+0203          16    100950         0            
  0    J1229+0203          17    100950         0            
  0    J1229+0203          18    102794.1       0            
  0    J1229+0203          19    102794.1       0            
  0    J1229+0203          20    112794.1       0            
  0    J1229+0203          21    112794.1       0            
  0    J1229+0203          22    114669.1       0            
  0    J1229+0203          23    114669.1       0            
  1    J1445-1629          0     -              -            
  1    J1445-1629          1     -              -            
  1    J1445-1629          2     -              -            
  1    J1445-1629          3     -              -            
  1    J1445-1629          4     -              -            
  1    J1445-1629          5     -              -            
  1    J1445-1629          6     -              -            
  1    J1445-1629          7     -              -            
  1    Titan               8     -              -            
  1    Titan               9     -              -            
  1    Titan               10    -              -            
  1    Titan               11    -              -            
  1    Titan               12    -              -            
  1    Titan               13    -              -            
  1    Titan               14    -              -            
  1    Titan               15    -              -            
  1    Titan               16    100950         0            
  1    Titan               17    100950         0            
  1    Titan               18    102794.1       0            
  1    Titan               19    102794.1       0            
  1    Titan               20    112794.1       0            
  1    Titan               21    112794.1       0            
  1    Titan               22    114669.1       0            
  1    Titan               23    114669.1       0            
  2    J1215+1654          0     -              -            
  2    J1215+1654          1     -              -            
  2    J1215+1654          2     -              -            
  2    J1215+1654          3     -              -            
  2    J1215+1654          4     -              -            
  2    J1215+1654          5     -              -            
  2    J1215+1654          6     -              -            
  2    J1215+1654          7     -              -            
  2    J1215+1654          16    100950         0            
  2    J1215+1654          17    100950         0            
  2    J1215+1654          18    102794.1       0            
  2    J1215+1654          19    102794.1       0            
  2    J1215+1654          20    112794.1       0            
  2    J1215+1654          21    112794.1       0            
  2    J1215+1654          22    114669.1       0            
  2    J1215+1654          23    114669.1       0            
  2    M100                8     -              -            
  2    M100                9     -              -            
  2    M100                10    -              -            
  2    M100                11    -              -            
  2    M100                12    -              -            
  2    M100                13    -              -            
  2    M100                14    -              -            
  2    M100                15    -              -            
  3    M100                16    100950         0            
  3    M100                17    100950         0            
  3    M100                18    102794.1       0            
  3    M100                19    102794.1       0            
  3    M100                20    112794.1       0            
  3    M100                21    112794.1       0            
  3    M100                22    114669.1       0            
  3    M100                23    114669.1       0            


Antennas: 9:
  ID   Name  Station   Diam.    Long.         Lat.                Offset from array center (m)                ITRF Geocentric coordinates (m)        
                                                                     East         North     Elevation               x               y               z
  0    CM01  N602      7.0  m   -067.45.17.4  -22.53.22.3          8.8026     -527.8556       22.1988  2225080.352214 -5440132.953723 -2481524.785064
  1    CM02  J502      7.0  m   -067.45.17.7  -22.53.23.0          2.1079     -549.4459       22.1451  2225070.958100 -5440127.669506 -2481544.654450
  2    CM03  J503      7.0  m   -067.45.17.4  -22.53.23.2          9.2488     -555.0633       22.1293  2225076.734603 -5440122.930506 -2481549.823442
  3    CM04  N605      7.0  m   -067.45.17.4  -22.53.23.9          9.6883     -575.8319       22.0821  2225074.066737 -5440115.246896 -2481568.938246
  4    CM05  J506      7.0  m   -067.45.17.9  -22.53.23.2         -4.9539     -555.3433       22.1258  2225063.547041 -5440128.203265 -2481550.079981
  5    CM06  N606      7.0  m   -067.45.17.1  -22.53.23.6         19.1996     -566.5626       22.0993  2225084.240791 -5440114.998068 -2481560.405534
  6    CM07  N601      7.0  m   -067.45.17.0  -22.53.22.5         21.0601     -532.5792       22.2041  2225091.003357 -5440126.617491 -2481529.138855
  7    CM09  N603      7.0  m   -067.45.17.7  -22.53.22.3         -0.0719     -527.8532       22.2212  2225072.146648 -5440136.333195 -2481524.791579
  8    CM12  J504      7.0  m   -067.45.17.0  -22.53.23.0         22.2032     -550.2530       22.1451  2225089.438350 -5440119.771735 -2481545.398029

This output shows that three sources were observed in each data set: J1229+0203(3c273), Titan, and the M100.

  • The M100 are our science target. Note that the source corresponds to a number of individual fields (see the Field ID column). There are 23 pointings for M100 Mosaic.
  • Titan is observed once and will be used to set the absolute flux scale of the data. However fluxes are not determined due to bad quality, we will not use Titan as an amplitude calibrator.
  • J1229+0203(3c273) plays two roles: it will serve as our bandpass calibrator, to characterize the frequency response of the antennas, and will be used to set the absolute flux scale of the data.
  • J1215+1654 is "gain calibrator" to track changes in the phase and amplitude response of the telescopes over time. Observations of J1215+1654 are interleaved with observations of the M100.

The output also shows that the data contain many spectral windows. Using the labeling scheme in the listobs above these are:

  • spw 16,spw 18,spw 20, and spw 22 hold our science data. These are "Frequency Domain Mode" (FDM) data with small (0.49 MHz) channel width and wide total bandwidth. As a result these have a lot of channels (4080). spw 22 holds the lower sideband (LSB) data and includes the CO(1-0) line. We will focus on these data.
  • spw 8, spw 10, spw 12, and spw 14 hold lower a resolution processing ("Time Domain Mode", TDM) of the data from the same part of the spectrum (baseband). These data have only 128 channels across 2 GHz bandwidth and so have a much coarser channel spacing than the FDM data. These were used to generate the calibration tables that we include in the tarball but will not otherwise appear in this guide.

The final column of the listobs output in the logger (not shown above) gives the scan intent. Later we will use this information to flag the pointing scans and the hot and ambient load calibration scans.

We'll now have a look at the configuration of the antennas used to take the data using the task plotants (<xr id="uid___A002_X5e971a_X124.plotants.png"/>).

<figure id="uid___A002_X5e971a_X124.plotants.png">

Position of antennas in dataset uid___A002_X5e971a_X124 obtained using task plotants

</figure>

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    print "Antenna configuration for : "+asdm
    plotants(vis=asdm+'.ms', figfile=asdm+'.plotants.png')
    clearstat()
    dummy_string = raw_input("Hit <Enter> to see the antenna configuration for the next data set.")

This will loop through all 6 data sets, show you the antenna position for each, and save that as a file named, e.g., "uid___A002_X5e971a_X124.plotants.png" for the first data set. The "raw_input" command asks CASA to wait for your input before proceeding. If you would prefer to just browse the .png files after the fact you can remove this. Notice that the antenna setup changes, but only slightly, over the course of the 6 data sets.

How to Deal With 6 Measurement Sets

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    print asdm

You only need to define your list of MS files once per CASA session. Then "basename" will be a variable in the casapy shell. You can check if it exists by typing "print basename". In the interests of allowing you to easily exit and restart CASA and pick this guide up at any point we will redefine "basename" in each section of the guide. Feel free to skip this step if you've already defined it in your session.

This page will step you through the reduction of the M100 Band3 SV data set using these 'for' loops. We will not be able to show every diagnostic plot but we give an example of each and the syntax to generate the rest. Also please be aware that even on a very fast machine this whole process can take a while, we are simply dealing with a lot of data.

A Priori Flagging

Even before we look in detail, we know that there are some data that we wish to exclude. We will start by flagging "shadowed" data where one antenna blocks the line of sight of another. We will also flag scans that were used to carry out pointing and atmospheric calibration, identified by their scan intent. Finally, we'll flag the autocorrelation data (the correlation of the signal from an antenna with itself) as we are only interested in cross-correlation data to make an interferometric image.

Start by defining our list of MS files:

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']
# In CASA
for asdm in basename:
    print " "+asdm
    flagcmd(vis=asdm+'.ms', inpmode='table', action='apply')

You may want to reset the flagging if you have tried this step before and are starting over though this is not necessary on your first time through. Do so using flagdata:

Then flag shadowed data using the command flagdata:

# In CASA
for asdm in basename:
    print "Flagging shadowed data for "+asdm
    flagdata(vis=asdm+'.ms',mode = 'shadow', flagbackup = F)

In the flagdata task we choose:

  • vis = asdm+'.ms' : each measurement set
  • mode = 'shadow': flag shadowed data
  • flagbackup = F: Do not automatically back up the flag files. We will save all of the a priori flags together using flagmanager at the end of this subsection and save some space and time.

The relevant calibration information has already been extracted from the pointing and atmospheric scans and we will not need them below. Now flag the pointing scans using flagdata in 'manualflag' mode and selecting on 'intent':

# In CASA
for asdm in basename:
    print "Flagging calibration scans for "+asdm
    flagdata(vis=asdm+'.ms', mode='manual', intent='*POINTING*,*SIDEBAND_RATIO*,*ATMOSPHERE*', flagbackup = F)

Note that because the atmospheric calibration scans contain only TDM spectral windows, they will be removed automatically when we separate out the FDM data below.

Now flag the autocorrelation data:

# In CASA
for asdm in basename:
    print "Flagging autocorrelation data for "+asdm
    flagdata(vis=asdm+'.ms',autocorr=True,flagbackup=F)

Finally store the current flags information using flagmanager:

# In CASA
for asdm in basename:
    print "Backing up 'a priori' flags for "+asdm
    flagmanager(vis = asdm+'.ms', mode = 'save', versionname = 'Apriori')
The flagmanager task will also allow you to view the saved flagging versions,
including those created by running flagdata with flagbackup=T.

For example try 

flagmanager(vis='uid___A002_X5e971a_X124.ms', mode='list')

The output in the logger should list the Apriori flagging that we have applied.
It will also indicate versions associated with any flagdata command where you
did not set flagbackup=F. Other tasks, for example applycal, will also create
flag version tables.

Create and Apply Tsys and Antenna Position Calibration Tables

#In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

Tsys

The Tsys calibration gives a first-order correction for the atmospheric opacity as a function of time and frequency and associates weights with each visibility that persists through imaging.

Use gencal to create the Tsys calibration tables from the spectral windows with CALIBRATE_ATMOSPHERE intents in listobs. Later in the applycal stage this TDM Tsys table will be interpolated to the FDM.

#In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
  os.system('rm -rf asdm+'.ms.tsys')
  gencal(vis = asdm+'.ms',
       caltable=asdm+'.ms.tsys',
       caltype = 'tsys')
  au.plotbandpass(caltable=asdm+'.ms.tsys',yaxis='amp',xaxis='freq'',buildpdf=False,
                figfile='tsysall'+spw+'_'+asdm+'.png, interactive=False, chanrange='8~120',subplot=42)

This sequence loops over all of our files and plots Tsys as a function of time for channel. In the call to plotcal: The Tsys values in CM01 and CM07 are too high. They will be flagged.

  • subplot=42 parameter sets up a 4 x 2 panel grid.
  • iteration tells plotcal to make a separate plot for each antenna.

The 'raw_input' commands will wait for you to hit Enter before issuing the next plot command. In the example above these are commented out (the leading "#" means that CASA will ignore them). If you would like to interactively cycle through the plots, uncomment them by removing the "#". Otherwise, the figfile parameter directs the output to .png files for later inspection. The easiest way to look at the 20 plots produced here is to simply inspect the .png files using your favorite viewer.

We will also want to look at Tsys as a function of frequency. This will use the analysisutils package mentioned at the beginning of this guide (called by the au. command)

<figure id="uid___A002_X5e971a_X124.spw8.t0.png">

Tsys vs. frequency plot for uid___A002_X5e971a_X124.

</figure> <figure id="uid___A002_X5e971a_X124.spw10.t3.png">

Tsys vs. frequency plot for uid___A002_X5e971a_X124.

</figure>

<figure id="uid___A002_X5e971a_X124.spw14.t1.png">

Tsys vs. frequency plot for uid___A002_X5e971a_X124.

</figure>

Now have a look at the Tsys vs. frequency plots or see <xr id="uid___A002_X5e971a_X124.spw8.t0.png"/>, <xr id="uid___A002_X5e971a_X124.spw10.t3.png"/>, and <xr id="uid___A002_X5e971a_X124.spw14.t1.png"/> for examples on the first data set. You can see the effect of a close pair of atmospheric ozone absorption lines at about 101.8 GHz that makes Tsys larger near that frequency in all antennas. Applying the Tsys calibration tables will minimize the contribution of these atmospheric lines.

Antenna Positions

The antenna position table reflects refinements in the measured positions of the antennas from those stored in the data. gencal will now be used put antenna position data into each observation. Again, gencal will merely append to existing antenna position data, ruining any subsequent results. We start by removing any existing antenna position refinements, followed by defining the antenna names, then their refinements (both as arrays), finally running gencal to create the information CASA can refer to for antenna positions.

#In CASA
os.system('rm -rf name+'.ms.antpos')

gencal(vis = 'uid___A002_X5e971a_X124.ms',
       caltable = 'uid___A002_X5e971a_X124.ms.antpos',
       caltype = 'antpos',
       antenna = 'CM02,CM03,CM04,CM05,CM06,CM07,CM09,CM12',
       parameter = [-1.04341656e-04,4.29447740e-04,4.12447378e-04,1.04838982e-05,4.57765535e-04,3.53057869e-04,
1.38600077e-03,-6.59998506e-04,-4.26100381e-03,-8.91945325e-04,4.27036546e-04,1.40665658e-03,-1.16256997e-04,
2.12460477e-03,-5.08893328e-03,-3.65406508e-03,1.86459431e-02,5.67199755e-03,8.04639747e-03,4.01791865e-02,
1.46969082e-03,-5.75850718e-05,6.55882061e-04,   7.88089819e-05])
gencal(vis = 'uid___A002_X5e971a_X124.ms',
       caltable = 'uid___A002_X5e971a_X124.ms.antpos',
       caltype = 'antpos',
       antenna = 'CM02',
       parameter = [0.0,0.0,0.0])

gencal(vis = 'uid___A002_X5e971a_X2e7.ms',
       caltable = 'uid___A002_X5e971a_X2e7.ms.antpos',
       caltype = 'antpos',
       antenna = 'CM02,CM03,CM04,CM05,CM06,CM07,CM09,CM12',
       parameter = [-1.04341656e-04,4.29447740e-04,4.12447378e-04,1.04838982e-05,4.57765535e-04,3.53057869e-04,
1.38600077e-03,-6.59998506e-04,-4.26100381e-03, -8.91945325e-04,4.27036546e-04,1.40665658e-03,-1.16256997e-04,
2.12460477e-03,-5.08893328e-03,-3.65406508e-03,1.86459431e-02,5.67199755e-03,8.04639747e-03,4.01791865e-02,
1.46969082e-03,-5.75850718e-05,6.55882061e-04,7.88089819e-05])


gencal(vis = 'uid___A002_X5e9ff1_X3f3.ms',
       caltable = 'uid___A002_X5e9ff1_X3f3.ms.antpos',
       caltype = 'antpos',
       antenna = 'CM02,CM03,CM04,CM05,CM06,CM07,CM09,CM12',
       parameter = [-1.04341656e-04,4.29447740e-04,4.12447378e-04,1.04838982e-05,4.57765535e-04,3.53057869e-04,
1.38600077e-03,-6.59998506e-04,-4.26100381e-03,-8.91945325e-04,  4.27036546e-04,1.40665658e-03,-1.16256997e-04,
2.12460477e-03,-5.08893328e-03,-3.65406508e-03,1.86459431e-02,5.67199755e-03,8.04639747e-03,4.01791865e-02,
1.46969082e-03,-5.75850718e-05,6.55882061e-04,7.88089819e-05])

gencal(vis = 'uid___A002_X5e9ff1_X5b3.ms',
       caltable = 'uid___A002_X5e9ff1_X5b3.ms.antpos',
       caltype = 'antpos',
       antenna = 'CM02,CM03,CM04,CM05,CM06,CM09,CM12',
       parameter = [-1.04341656e-04,4.29447740e-04,4.12447378e-04,1.04838982e-05,4.57765535e-04,3.53057869e-04,
1.38600077e-03,-6.59998506e-04,-4.26100381e-03,-8.91945325e-04,4.27036546e-04,1.40665658e-03,-1.16256997e-04,
2.12460477e-03,-5.08893328e-03,8.04639747e-03,4.01791865e-02,1.46969082e-03,-5.75850718e-05,6.55882061e-04,7.88089819e-05])

gencal(vis = 'uid___A002_X60b415_X44.ms',
       caltable = 'uid___A002_X60b415_X44.ms.antpos',
       caltype = 'antpos',
       antenna = 'CM12,CM02,CM03,CM05',
       parameter = [5.70082944295e-05,-0.00065711393962,-7.91980095891e-05,0.000104837426825,-0.000430660050663,
-0.000411915081903,-1.1060689293e-05,-0.000458996548728,-0.00035344706733,
                    0.000982235185802,-0.000412690453231,-0.00145998690277])
gencal(vis = 'uid___A002_X60b415_X44.ms',
       caltable = 'uid___A002_X60b415_X44.ms.antpos',
       caltype = 'antpos',
       antenna = 'CM02',
       parameter = [0.0,0.0,0.0])

Applycal

We are now ready to apply the Tsys tables to the data with applycal, which reads the specified gain calibration tables, applies them to the (raw) data column, and writes the calibrated results into the corrected column. Again, we loop through all the datasets. It is important to only apply Tsys obtained close in time to the data being corrected, so in addition to looping over data sets we define the list of unique source names and loop over these. Then by setting gainfield and field to the same value we ensure that Tsys are only applied to the source for which they are measured. The applycal task now has much more flexibility for interpolating and applying calibrations derived in one spectral window to another, even if they do not share the same spectral shape (number of channels and channel width). This new functionality is used below to interpolate the TDM (128 channel) Tsys measurements to the FDM (4080 channel) spectral windows. This is controlled through the spectral window mapping parameter *spwmap*. Because this can be a bit confusing, we've written a "helper" function that will tell you what you should put for the Tsys calibration table part of spwmap. We only need to run it on one of the datasets because they are all the same in this regard

# In CASA

for name in basename:
from recipes.almahelpers import tsysspwmap
tsysspwmap(vis=name+'.ms',tsystable=name+'.tsys')

Now run the applycal commands.

# In CASA


basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

from recipes.almahelpers import tsysspwmap
tsysmap = tsysspwmap(vis = name+'.ms', tsystable = name+'.ms'+'.tsys')

for asdm in basename:
    applycal(vis=name+'.ms', field = 'J1229+0203',
      spw='16,18,20,22',
      gaintable = [name+'.ms'+'.tsys',name+'.ms'+'.antpos'],
      spwmap = [tsysmap],
      gainfield=['J1229+0203',''],
      calwt=T,
      flagbackup=F)

    applycal(vis=name+'.ms', field = 'Titan',
      spw='16,18,20,22',
      gaintable = [name+'.ms'+'.tsys',name+'.ms'+'.antpos'],
      spwmap = [tsysmap],
      gainfield=['Titan',''],
      calwt=T,
      flagbackup=F)

    applycal(vis=name+'.ms', field = 'J1215+1654,M100',
      spw='16,18,20,22',
      gaintable = [name+'.ms'+'.tsys',name+'.ms'+'.antpos'],
      spwmap = [tsysmap],
      gainfield=['M100',''],
      calwt=T,
      flagbackup=F)

where:

  • field: the field to which we will apply the calibration,
  • gainfield: the field from which we wish to take the calibration table

Here, we split out science spws in order to inspect M100 dataset.

# In CASA
for asdm in basename:
split(vis = asdm+'.ms',
      outputvis = asdm+'.ms.split',
      datacolumn = 'corrected',
      spw = '16,18,20,22',
      keepflags = F)
# In CASA
os.system('cat uid___A002_X5e971a_X124.ms.split.listobs.txt')
  ID   Code Name                RA               Decl           Epoch   SrcId    nRows  nUnflRows
  0    none J1229+0203          12:29:06.699720 +02.03.08.59820 J2000   0         6720       0.00
  2    none Titan               14:36:50.919019 -12.33.38.18202 J2000   1         2520       0.00
  3    none J1215+1654          12:15:03.979130 +16.54.37.95700 J2000   2         4704       0.00
  5    none M100                12:22:57.009007 +15.49.13.60358 J2000   3         1344       0.00
  6    none M100                12:22:57.009041 +15.49.58.08112 J2000   3         1344       0.00
  7    none M100                12:22:54.339884 +15.47.22.41016 J2000   3         1344       0.00
  8    none M100                12:22:54.339918 +15.48.06.88770 J2000   3         1344       0.00
  9    none M100                12:22:54.339952 +15.48.51.36524 J2000   3         1344       0.00
  10   none M100                12:22:54.339986 +15.49.35.84278 J2000   3         1008       0.00
  11   none M100                12:22:54.340020 +15.50.20.32032 J2000   3         1008       0.00
  12   none M100                12:22:51.670863 +15.47.44.64936 J2000   3         1008       0.00
  13   none M100                12:22:51.670897 +15.48.29.12690 J2000   3         1008       0.00
  14   none M100                12:22:51.670931 +15.49.13.60444 J2000   3         1008       0.00
  15   none M100                12:22:51.670966 +15.49.58.08198 J2000   3         1008       0.00
  16   none M100                12:22:49.001808 +15.47.22.41102 J2000   3         1008       0.00
  17   none M100                12:22:49.001842 +15.48.06.88856 J2000   3         1008       0.00
  18   none M100                12:22:49.001876 +15.48.51.36610 J2000   3         1008       0.00
  19   none M100                12:22:49.001911 +15.49.35.84364 J2000   3         1008       0.00
  20   none M100                12:22:49.001945 +15.50.20.32118 J2000   3         1008       0.00
  21   none M100                12:22:59.677959 +15.47.22.40931 J2000   3         1008       0.00
  22   none M100                12:22:59.677993 +15.48.06.88685 J2000   3         1008       0.00
  23   none M100                12:22:59.678027 +15.48.51.36439 J2000   3         1008       0.00
  24   none M100                12:22:59.678061 +15.49.35.84193 J2000   3         1008       0.00
  25   none M100                12:22:59.678095 +15.50.20.31947 J2000   3         1008       0.00
  26   none M100                12:22:57.008938 +15.47.44.64850 J2000   3         1008       0.00
  27   none M100                12:22:57.008973 +15.48.29.12604 J2000   3         1008       0.00
Spectral Windows:  (4 unique spectral windows and 1 unique polarization setups)
  SpwID  Name                           #Chans   Frame   Ch1(MHz)  ChanWid(kHz)  TotBW(kHz) BBC Num  Corrs  
  0      ALMA_RB_03#BB_1#SW-01#FULL_RES   4080   TOPO  101945.850      -488.281   1992187.5       1  XX  YY
  1      ALMA_RB_03#BB_2#SW-01#FULL_RES   4080   TOPO  103761.000      -488.281   1992187.5       2  XX  YY
  2      ALMA_RB_03#BB_3#SW-01#FULL_RES   4080   TOPO  111811.300       488.281   1992187.5       3  XX  YY
  3      ALMA_RB_03#BB_4#SW-01#FULL_RES   4080   TOPO  113686.300       488.281   1992187.5       4  XX  YY
Sources: 16
  ID   Name                SpwId RestFreq(MHz)  SysVel(km/s) 
  0    J1229+0203          0     100950         0            
  0    J1229+0203          1     102794.1       0            
  0    J1229+0203          2     112794.1       0            
  0    J1229+0203          3     114669.1       0            
  1    Titan               0     100950         0            
  1    Titan               1     102794.1       0            
  1    Titan               2     112794.1       0            
  1    Titan               3     114669.1       0            
  2    J1215+1654          0     100950         0            
  2    J1215+1654          1     102794.1       0            
  2    J1215+1654          2     112794.1       0            
  2    J1215+1654          3     114669.1       0            
  3    M100                0     100950         0            
  3    M100                1     102794.1       0            
  3    M100                2     112794.1       0            
  3    M100                3     114669.1       0   
Antennas: 8:
  ID   Name  Station   Diam.    Long.         Lat.                Offset from array center (m)                ITRF Geocentric coordinates (m)        
                                                                     East         North     Elevation               x               y               z
  1    CM02  J502      7.0  m   -067.45.17.7  -22.53.23.0          8.8026     -527.8556       22.1988  2225080.352214 -5440132.953723 -2481524.785064
  2    CM03  J503      7.0  m   -067.45.17.4  -22.53.23.2          2.1079     -549.4459       22.1451  2225070.958100 -5440127.669506 -2481544.654450
  3    CM04  N605      7.0  m   -067.45.17.4  -22.53.23.9          9.2488     -555.0633       22.1293  2225076.734603 -5440122.930506 -2481549.823442
  4    CM05  J506      7.0  m   -067.45.17.9  -22.53.23.2          9.6883     -575.8319       22.0821  2225074.066737 -5440115.246896 -2481568.938246
  5    CM06  N606      7.0  m   -067.45.17.1  -22.53.23.6         -4.9539     -555.3433       22.1258  2225063.547041 -5440128.203265 -2481550.079981
  6    CM07  N601      7.0  m   -067.45.17.0  -22.53.22.5         19.1996     -566.5626       22.0993  2225084.240791 -5440114.998068 -2481560.405534
  7    CM09  N603      7.0  m   -067.45.17.7  -22.53.22.3         21.0601     -532.5792       22.2041  2225091.003357 -5440126.617491 -2481529.138855
  8    CM12  J504      7.0  m   -067.45.17.0  -22.53.23.0         -0.0719     -527.8532       22.2212  2225072.146648 -5440136.333195 -2481524.791579

Inspect Data

We are not quite done with the original ".ms" data sets yet. Before going further it will be useful to use plotms to show the effects of applying the calibration. In the process we'll take a quick look at each antenna and search for pathologies in the data.

For this basic inspection, we want to compare the phase and amplitude as a function of frequency and time in the DATA and CORRECTED columns of each measurement set. The CORRECTED column has had the Tsys applied and so we expect lower phase scatter and flatter amplitude response as a function of time and frequency. We are looking for antenna-based issues, so cycling through a set of baselines that includes each antenna once will be a good start. We'll focus these plots on the bandpass calibrator, 3c273, and on baselines that include antenna CM04, which we will make our reference antenna in just a bit.


Each CASA Measurement Set has up to three "columns" of data: DATA, CORRECTED, and MODEL (though it is possible
for a MS to hold only a DATA column if it has not been processed at all). 

A column entry exists for each data point (baseline, frequency, time). 

The DATA column holds the current raw data, though using split as we just did we can change the definition of
"raw" data. 

The CORRECTED column holds the result of applying one or more calibration tables (e.g., via applycal) to the
DATA column and so represents a corrected version of the DATA column. 

In CASA 4.1: the MODEL column is deprecated (though it is still possible to use them by explicitly setting usescratch=T).
Instead, the model is stored in the header of the ms. This is a great step forward in terms of saving space and time 
to create scratch columns  

To get an intuitive feel for the columns you may wish to explore using plotms (which can plot different data 
columns, as seen below) or the browsetable task.

<figure id="plotms_amp_vs_freq.png">

Example of Amplitude vs. Frequency before correction.

</figure> <figure id="plotms_amp_vs_freq_corr.png">

Same baseline as <xr id="plotms_amp_vs_freq.png"/> but now after correction using Tsys calibrations.

</figure>

First, we plot amplitude as a function of frequency for 3c273. We start by plotting the DATA column, set color to indicate the two correlations (i.e., the XX and YY polarizations), and ask plotms to iterate over baseline. By setting antenna to 'CM04&*' we select only baselines that include CM04. We ask plotms to average all data over a very long timescale, avgtime = 1e8 seconds. By setting avgscan = True we allow plotms to average across scan boundaries. The result is a plot of average amplitude per channel vs. frequency.

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

asdm=basename[0]

plotms(vis=asdm+'.ms.split', 
       field='J1229+0203',
       xaxis='frequency', yaxis='amp',
       selectdata=T, spw='3', 
       avgtime='1e8',avgscan=T,
       coloraxis='corr',
       iteraxis='baseline',
       antenna='CM04&*',
       ydatacolumn='data')

Notice the green arrows along the bottom of the plotms window. We asked plotms to iterate over baseline. As you click the arrows, the plot will rotate from baseline to baseline, always with CM04 so that each antenna shows up once. To see the effect of the calibration, go to the "Axes" tab along the left of the plotms window and pull down the Data Column menu under the Y Axis. Set this from DATA to CORRECTED and you should see the effects of the calibration. You may need to ensure that the "Force Reload" box is checked before clicking "Plot" (both buttons lie at the bottom of the panel). For the most part things get better (flatter).

<figure id="plotms_amp_vs_time.png">

Example of amplitude vs. time before correction.

</figure> <figure id="plotms_amp_vs_time_corr.png">

Example of amplitude vs. time after correction.

</figure>

You can now make analogous calls to examine the phase vs. frequency, amplitude vs. time, and phase vs. time.

# In CASA
plotms(vis=asdm+'.ms.split', 
       field='J1229+0203',
       xaxis='frequency', yaxis='phase',
       selectdata=T, spw=3', 
       avgtime='1e8',avgscan=T,
       coloraxis='corr',
       iteraxis='baseline',
       antenna='CM04&*',
       ydatacolumn='data')

plotms(vis=asdm+'.ms.split', 
       field='J1229+0203',
       xaxis='time', yaxis='amp',
       selectdata=T, spw='3', 
       avgchannel='1000',avgscan=F,
       coloraxis='corr',
       iteraxis='baseline',
       antenna='CM04&*',
       ydatacolumn='data')

plotms(vis=asdm+'.ms.split', 
       field='J1229+0203',
       xaxis='time', yaxis='phase',
       selectdata=T, spw='3', 
       avgchannel='1000',avgscan=F,
       coloraxis='corr',
       iteraxis='baseline',
       antenna='CM04&*',
       ydatacolumn='data')

Where:

  • avgchannel set to a large number causes the plots of phase and amplitude vs. time to average data at all frequencies into a single point for each measurement.
  • coloraxis corr sets the colors to correspond to the two polarizations of the data.

In each case, you will want to examine each baseline, alternating between the DATA and CORRECTED columns.

This is a lot of data inspection and that's only for one of 6 data sets! You can iterate across the data by hand, updating "asdm" to refer to each data set in order and cycling between baselines and DATA/CORRECTED. It is also possible to script CASA to show you the key plots in succession (see the next block down). However you approach the infrastructure, you are looking for:

  • Improved scatter and lower variability in phase and amplitude vs. frequency and time. This indicates that Tsys calibrations helped.
  • Sudden jumps in phase or amplitude as a function of either time or frequency. These may indicate problems with the antenna during that observation.
  • Large gradients, especially full wraps, in phase as a function of frequency. This may indicate a problem in the delays, the signal path length to the telescopes.
  • Unusual magnitude, scatter, or patterns in any plot - though this may be better explored using plots that show all data together, which we'll make in a moment.
  • Missing data. For example, if the phase calibrator drops out for a period of time we will not be able to calibrate and will need to flag the data.

As you look through, note individual potentially problematic antennas. If all antennas in a data set appear problematic it may be that your "reference" antenna, CM04 in the example above, is the source of the problem. In this case swap this reference antenna for another and see whether the problem is isolated to your original reference antenna.


A brief aside on structure:

This section (Data Inspection) and the next (Apply Flags) are closely linked. We will present them as two
separate steps. The idea here is that you look through your data, note problems, and then write commands to
flag problematic data. This mimics one approach to writing data reduction scripts for CASA, where you will
group all flagging together into one convenient place. Other CASA guides take a different approach, interleaving 
flagging and plotting. There is no "right" answer here. Find an approach to data inspection that works for you.

If you do wish to semi-automate the plot generation, the following sequence will cycle between data and corrected plots for each data set in turn. Type "stop" at any input call to break out.

Note: In loops like this involving plotms, hitting enter before the last dataset completes loading may cause plotms to stop refreshing the plot window at each step, or cause the window to disappear altogether. This will be fixed in an upcoming CASA release. Right now, you may need to exit CASA and restart to bring up the plotms window again, but you should be able to continue in the script where you left off.

# In CASA

user_input = ""
for asdm in basename:
    # check if a stop has been requested
    if user_input == "stop":
        break
    # Extract antenna list for this data set.
    tb.open(asdm+'.ms/ANTENNA', nomodify=True)
    ants = tb.getcol('NAME')
    tb.close
    # Define the reference antenna to make baselines with
    ref_ant = 'CM04'
    # Loop over antennas
    for ant in ants:
        # Check if the user wants to stop
        if user_input == "stop":
            break
        # Skip correlation of reference antenna with itself (autocorrelations are flagged anyhow)        
        if ant == ref_ant:
            continue
        # Define the baseline with the reference antenna for current antenna
        ant_str = ref_ant+'&'+ant
        print "Showing baseline "+ant_str+" for data set "+asdm
        print "Use this to inspect effect of applying Tsys calibrations."
        # Loop over phase and amplitude as axes
        for y_axis in ["amp", "phase"]:
            # Make 'before' plot for frequency x-axis
            print "... "+y_axis+" vs. frequency for DATA:"    
            plotms(vis=asdm+'.ms', spw='3', field='J1229+0203',,
               antenna=ant_str, xaxis="frequency", yaxis=y_axis,
               avgtime="1e8", avgscan=T, coloraxis="corr",
               ydatacolumn="data")
            user_input = raw_input("Hit <ENTER> to see CORRECTED data [type 'stop'+<Enter> to break out].")
            if user_input == "stop":
                break
            # Make 'after' plot for frequency x-axis
            print "... "+y_axis+" vs. frequency for CORRECTED:"
            plotms(vis=asdm+'.ms', spw='3', field='J1229+0203',,
               antenna=ant_str, xaxis="frequency", yaxis=y_axis,
               avgtime="1e8", avgscan=T, coloraxis="corr",
               ydatacolumn="corrected")
            user_input = raw_input("Hit <ENTER> to proceed to next plot [type 'stop'+<Enter> to break out].")
            if user_input == "stop":
                break
            # Make 'before' plot for time x-axis
            print "... "+y_axis+" vs. time for DATA:"    
            plotms(vis=asdm+'.ms', spw='3', field='J1229+0203',,
               antenna=ant_str, xaxis="time", yaxis=y_axis,
               avgchannel="1000", coloraxis="corr",
               ydatacolumn="data")
            user_input = raw_input("Hit <ENTER> to see CORRECTED data [type 'stop'+<Enter> to break out].")
            if user_input == "stop":
                break
            # Make 'after' plot for time y-axis
            print "... "+y_axis+" vs. time for CORRECTED:"
            plotms(vis=asdm+'.ms', spw='3', field='J1229+0203',,
               antenna=ant_str, xaxis="time", yaxis=y_axis,
               avgchannel="1000", coloraxis="corr",
               ydatacolumn="corrected")
            user_input = raw_input("Hit <ENTER> to proceed to next plot [type 'stop'+<Enter> to break out].")
            if user_input == "stop":
                break

<figure id="plotms_amp_freq_M100.png">

Example of amplitude vs. frequency for the M100 mosaic data set. The CO(1-0) line is visible.

</figure>

A detailed explanation of the procedure is a bit outside the scope of this guide (for more on python see http://www.python.org/ and for more on the CASA toolkit see http://casa.nrao.edu/), but the basic process is to loop over each data set, baseline with the reference antenna (here CM04), and y-axis of interest (phase or amplitude) then plot the effect of the calibration vs. frequency and time for each combination. Running this to step through the data will give you about 200 "before and after" plots from which you could note a subset of problematic cases to be followed up by hand. Many other strategies to inspect the data are also viable.

With the Tsys applied successfully and the a priori flagging taken care of we will now split out the corrected data. We will keep only the corrected data, specified via datacolumn, and only spectral window 1, which contains the FDM (high spectral resolution) observations of the CO(1-0) line. Setting keepflags=F tells split not to carry over any fully flagged rows from the original data set to the new MS. We give the new MS files the extension ".ms.split" to indicate that they have been corrected for Tsys effects. Because split will not overwrite existing files, we remove any previous versions of the new MS before beginning.

# In CASA
for asdm in basename:
    os.system('rm -rf '+asdm+'.ms.split')
    print "Splitting out corrected data for "+asdm
    split(vis=asdm+'.ms', outputvis=asdm+'.ms.split', 
        datacolumn='corrected', spw='1', keepflags=F)

Be patient, split may take awhile. The Tsys-corrected data now sit in the DATA column of the new measurement sets, which have only one spectral window (now labeled spectral window 0 though it was spectral window 1 in the original data). You may wish to run listobs to illustrate the changes:

# In CASA
for asdm in basename:
    os.system('rm '+asdm+'.ms.split.listobs.txt')
    listobs(vis=asdm+'.ms.split', listfile=asdm+'.ms.split.listobs.txt', verbose=True)


Next we will do a bit more inspection using plotms to look at whole data sets. This will help us identify missing data or look for egregious outliers.

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    plotms(vis=asdm+'.ms.split', 
            xaxis='time', yaxis='amp', 
            avgchannel='4080',coloraxis='field')
    dummy_string = raw_input("Examining amplitude vs. time for "+asdm+" . Hit <Enter> to proceed.")

Here look for:

  • Missing data. The source needs to be flanked by phase calibrator scans, if those are missing for any reason we need to flag the appropriate time range.
  • Dramatic outliers. Does the source suddenly get very bright or the otherwise bright calibrator appear anomalously faint for a brief time? This likely indicates problematic data that should be identified and flagged. You can use the "select" (box with green plus along the bottom row in plotms) and "locate" (magnifying glass) buttons in plotms to isolate and identify problem data (it will print to the log).
  • Smooth variation with time. A sudden jump may indicate a problem and often the safest approach is to flag data near a discontinuity.

Look through the amplitudes vs. time for each data set (remember that we've already examined the phases vs. time and amplitude vs. time for individual baselines above).

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    plotms(vis=asdm+'.ms.split', 
        field='J1229+0203',
        xaxis='uvdist', yaxis='amp', 
        avgchannel='4080',coloraxis='corr')
    dummy_string = raw_input("Examining amplitude vs. UV Distance for J1229+0203 for "+asdm+" . Hit <Enter> to proceed.")
    plotms(vis=asdm+'.ms.split', 
        field='Titan',
        xaxis='uvdist', yaxis='amp', 
        avgchannel='4080',coloraxis='corr')
    dummy_string = raw_input("Examining amplitude vs. UV Distance for Titan for "+asdm+" . Hit <Enter> to proceed [type 'stop'+<Enter> to break out].")
    # check if a stop has been requested
    if dummy_string == "stop":
        break

For this command notice that we can see the CO(1-0) line in the M100 even before calibration (see <xr id="plotms_amp_freq_M100.png"/>) shows evidence of a strong line. This suite of plots (along with the earlier inspection of the Tsys tables) gives us the tools we need to identify problematic data through the data sets. We use this to generate a set of inspection-driven flagdata commands for each data set. We apply these before the bandpass and gain calibration.

Apply Flagging

Based on this inspection and the other plots we have made, we now flag problematic portions of the data. We break up the flags by reason for flagging in order to illustrate the process. As you reduce your own data it may be more efficient to group flags by data set and make use of the flagcmd command. Except for the "post-calibration" flagging, the inspection plots that we just looked through have already revealed all of the problems that we flag. We structure the guide so that the flagging is grouped in one place.

As before, we may wish to reset our flags before beginning (particularly if one iterates this process) via:

# In CASA

basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']
for asdm in basename:
    flagdata(vis = asdm+'.ms.split',mode='unflag', flagbackup = F)

Remember that we dropped the flagged data when splitting out after the Tsys calibration, so this should not undo your "A Priori" flagging of shadowed data, autocorrelations, etc.. In any case this unflagging step is not necessary during the first iteration.

  • Edge Channels

ALMA's sensitivity decreases near the edge of the baseband and it is often useful to check for a 'roll-off' in sensitivity near the edge of the band. This will appear as a downturn in amplitude as a function of channel near the edge of the window in the uncalibrated data, as a flaring due to increased noise at the spw edges in the calibrated data.

<figure id="plotms_CM04&CM06_edge.png">

Amplitude vs. channel for one uncalibrated antenna pair (CM04 and CM06). This kind of plot can be inspected to get an idea of the presence or magnitude of any roll-off in sensitivity near the edges of the spectral window.

</figure>

# In CASA
for asdm in basename:
    flagdata(vis = asdm+'.ms.split', mode='manual', spw = '*:0~127,*:3952~4079, flagbackup = F)
  • Problematic Tsys measurements

Above we noted issues with the Tsys measurements for both CM01 and CM07. We flag the affected data.

# In CASA
for asdm in basename:
flagdata(vis= asdm+'.ms.split', mode='manual', antenna='CM01', flagbackup=F)

for asdm in basename:
flagdata(vis= asdm+'.ms.split', mode='manual', antenna='CM07', flagbackup=F)
  • Unreliable Short-Spacing Measurements on Titan

<figure id="plotms_amp_uvdist_titan.png">

Observed amplitude vs. uv-distance for observations of Titan in the first data set. Note the scatter for low projected antenna separations. We will flag these short-spacing data, which may reflect contamination by Saturn, and use only the more extended baselines for flux calibration.

</figure> Saturn may contaminate the short u-v spacings from Titan. In any case these often show significant scatter (<xr id="plotms_amp_uvdist_titan.png"/>), so we flag them.

# In CASA
for asdm in basename:
flagdata(vis=asdm+'.ms.split', mode='manual', field='Titan', flagbackup = F)


Now that we've applied our flagging, back up the flags as version "User" using flagmanager:

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    flagmanager(vis=asdm+'.ms.split',mode='save',versionname ='User')

Applying this flagging will remove the most egregious pathologies from the data. We are now ready to calibrate the data.

Bandpass Calibration

We begin by calibrating the phase and amplitude response of each antenna as a function of frequency, called "bandpass calibration." We have already seen that the data contain smooth but systematic variations in both phase and amplitude as a function of frequency. We can see this again in a more compact form by plotting phase as a function of frequency for all baselines associated with each antenna (<xr id="plotms_phase_freq_3c273.png"/>).

<figure id="plotms_phase_freq_3c273.png">

Phase vs. frequency for the bandpass calibrator, 3c273(J1229+0203) in the first data set. We plot all baselines with CM04, averaged over time, and show only the 'XX' correlation.

</figure>

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    plotms(vis= asdm+'.ms.split', 
            xaxis='freq', yaxis='phase', spw='3',
            field='J1229+0203', correlation='XX',
            avgtime='1e8', avgscan=T, antenna='*&*',
            coloraxis='baseline')
    dummy_string = raw_input("Plotting phase vs. frequency for "+asdm+". Hit <Enter> for next data set or cycle through antennas [type 'stop'+<Enter> to break out].")
    # check if a stop has been requested
    if dummy_string == "stop":
        break

Each plot shows phase as a function of frequency for all baselines with one antenna for 3c273(J1229+0203). We plot only the 'XX' correlation, colorizing by baseline. By using avgscan and a large avgtime we average all scans and integrations.

The phase (and amplitude) also varies as a function of time, as we saw before. Here are the similar plots for phase vs. time (see <xr id="plotms_phase_time_3c273.png"/>).

<figure id="plotms_phase_time_3c273.png">

Phase vs. time for the bandpass calibrator, 3c273(J1229+0203). Averaged over channel. Only baselines with antenna CM04, and corr='XX'

</figure>

# In CASA
for asdm in basename:
    plotms(vis= asdm+'.ms.split', 
           xaxis='time', yaxis='phase', 
           selectdata=True, field='J1229+0203', 
           spw='3', antenna='*&*',correlation='XX',
           avgchannel='1000', 
           coloraxis='baseline')
    dummy_string = raw_input("Plotting phase vs. time for "+asdm+". Hit <Enter> for next data set or cycle through antennas [type 'stop'+<Enter> to break out].")
    # check if a stop has been requested
    if dummy_string == "stop":
        break

<xr id="plotms_phase_time_3c273.png"/> shows that the phase varies with time. We need to take this temporal variation into account when we solve for the frequency variations. Therefore we carry out the bandpass calibration in two steps. First, we use gaincal to solve for the variation of phase as a function of time for 3c273(J1229+0203) on very short timescales. We set gaincal to derive a separate phase solution for each antenna every integration by setting solint to 'int'. We solve, averaging together only a small fraction of the total bandpass to avoid the effects of the phase vs. frequency behavior. We will then apply this solution to remove time-dependent behavior when we solve for the frequency response of the antennas with bandpass.

An integration is the smallest time quantum of observation in the data, usually a few seconds. 
You can check the integration length for each scan in listobs. 
#In CASA

for asdm in basename:
    print "Running a short solution interval phase calibration for "+asdm
    os.system('rm -rf '+asdm+'.bpphase.gcal')
    gaincal(vis = asdm+'.ms.split',
               selectdata=T,field = 'J1229+0203',spw = '',
               caltable = asdm+'.bpphase.gcal',
               solint = '30.3s',refant = 'CM04', minsnr = 2.0, minblperant = 3)

Now we use bandpass to solve for the frequency response of each antenna. To do this, we average all data in time by setting solint to 'inf' (that is, 'infinite'). We allow combination across scans and the different field IDs found for 3c273 by setting combine to "scan,field". We apply the phase vs. time calibration that we just derived on-the-fly using the parameter "gaintable".

for asdm in basename:
    print "Running a bandpass calibration for "+asdm
    os.system('rm -rf '+asdm+'.bandpass.bcal')
    bandpass(vis = asdm+'.ms.split,
               field = 'J1229+0203',
               gaintable = asdm+'.bpphase.gcal',
               caltable = asdm+'.bandpass.bcal',
               bandtype='B',
               solint = 'inf, 16ch',combine = 'scan,field', solnorm=T,refant = 'CM04',
               minsnr=1.0, minblperant = 2)

in these calls:

  • caltable specifies the output calibration table
  • gaintable specifies any calibration tables to be applied "on the fly" to the data before solving.
  • solint sets the time interval for which solutions are derived for each antenna.
  • refant set the reference antenna, here CM04, which is defined to have zero correction by construction.
  • calmode 'p' sets gaincal to calibrate the phase only, other options are 'a'mplitude or 'ap' - amplitude and phase.
  • minblperant sets the minimum baselines required per antenna for a successful solution.
  • minsnr sets the minimum signal-to-noise ratio required for a successful solution.
  • bandtype here 'B' tells bandpass to solve for the phase and frequency response of each antenna in each channel, averaging data in time across the solution interval.
  • fillgaps tells bandpass to interpolate across channel gaps 1 channel wide.
  • solnorm tells bandpass to normalize the bandpass amplitude and phase corrections to have magnitude unity. The absolute scale of the calibration will come from our later gaincal solutions.

Do not worry about the message "Insufficient unflagged antennas" when running the bandpass task. This indicates that bandpass is failing on the flagged edge channels, which is expected.

It is now a good idea to plot both sets of solutions to look for irregularities, especially:

  • discontinuities in the phase vs. time solution
  • rapid wrapping of phase in either phase vs. time or bandpass solution
  • large roll-off in the amplitude response near the band edge in the bandpass solution
  • large scatter in any solution.

We loop through and using analysis utils, again generating .png files of each calibration. As the bandpass plots take a while you may want to go have a cup of coffee and inspect them using your favorite image viewer. Otherwise, switch the interactive parameter to True to see them in real time instead.

<figure id="bandpass.CM02.png">

Bandpass amplitude ad phase solution for CM02 and the first data set.

</figure>

<figure id="bandpass_freq_amp.png">

Bandpass amplitude solution for the first set of antennas and the first data set.

</figure>

<figure id="bandpass_freq_phase.png">

Bandpass phase solution for the rest antennas and the first data set.

</figure>

#In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

os.system('rm -rf cal_plots/*bandpass*.png')
for asdm in basename:
  aU.plotbandpass(caltable=asdm+'.bandpass.bcal',
                field='',xaxis='freq',yaxis='both',
                figfile='cal_plots/'+asdm+'.bandpass.png',
                showatm=True,interactive=False,subplot=42)

Absolute Flux Calibration

The bandpass calibration will account for the phase and amplitude response of our antennas as a function of frequency. We now solve for the absolute flux scale of the data by referencing to 3c273 and in the next section we will calibrate the phase and amplitude behavior of the antennas as a function of time. However, Titan is not available for these dataset, instead we will use flux of 3c273.

# in CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

Next, we will use the {{setjy}} task to read the predicted complex visibilities for J1229+0203 into the MODEL column of each data set.
Put in best flux density for J1229+0203 on Mar 17, 2013.

<source lang="python">
# in CASA
for asdm in basename:
    print "Put in best flux density for 3c273 into "+asdm
    setjy(vis = asdm+'.ms.split',
                field = 'J1229+0203',
                fluxdensity = [8.0,0,0,0],
                spw = '0,1',
                usescratch = F)
          
    setjy(vis = asdm+'.ms.split',
                field = 'J1229+0203',
                fluxdensity = [7.7,0,0,0],
                spw = '2,3',
                usescratch = F)

setjy will output the flux of 3c273 to the CASA logger and it is worth recording this information. The flux of 3c273 at these frequencies is about 8.0 Jy.

Gain (Phase and Amplitude) Calibration

With the flux now properly scaled, we will calibrate the phase and amplitude behavior of the antennas as a function of time.

We begin by running a short-solution interval gaincal to solve for phase variation on short timescales during observations of our two calibrators, with solint set to "int". By applying this on-the-fly, we can remove any decorrelation in the data due to phase scatter when we solve for the amplitude calibration. However, there is no benefit to using this short-timescale solution to calibrate the source because we only have information on the gain during calibrator visits (though see the Imaging portion of this guide). Instead we will solve for the gains to apply to the source using a longer solint in just a moment.

# in CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    print "Carrying out short timescale phase solution for "+asdm
    os.system('rm -rf '+asdm+'.intphase.gcal')
    gaincal(vis=asdm+'.ms.split',
                gaintable=asdm+'.bandpass.bcal', 
                caltable=asdm+'.intphase.gcal',
                calmode='p',
                field='J1229+0203',
                spw='',
                refant='CM04', solint='int',minsnr=3.0)

Now we derive the longer timescale phase calibration table using solint set to "inf", but not allowing scan combination. This calibration has higher signal to noise due to combining more data, and for the purposes of correcting the source, it is just as precise as the short timescale solution.

# in CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    print "Carrying out longer timescale phase solution for "+asdm
    os.system('rm -rf '+asdm+'.scanphase.gcal')
    gaincal(vis=asdm+'.ms.split,
                gaintable=asdm+'.bandpass.bcal', 
                caltable=asdm+'.scanphase.gcal',
                calmode='p',
                field='J1229+0203',
                spw='',
                refant='CM04', solint='inf',minsnr=2.0)

Now we apply the short-timescale phase solution and carry out a scan length (solint set to "inf") calibration of the data using calmode of 'ap'.

# in CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    print "Solving for longer (scan) interval amplitude solution for "+asdm
    os.system('rm -rf '+asdm+'.amp.cal')
    gaincal(vis = asdm+'.ms.split',
               gaintable =[asdm+'.bandpass.bcal',asdm+'.intphase.gcal'],
               caltable = asdm+'.amp.cal',
               calmode='ap',
               field = '0,3',
               spw='',
               refant = 'CM04',solint = 'inf', minsnr=2.0)

This "amp.cal" solution gives us the amplitude variations as a function of time, but they are not yet pinned to a realistic scale except in the case of Titan, where we have solved using the model input by setjy. We will set the flux of our secondary calibrator 3c279 with reference to Titan using fluxscale.

# in CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    print "Scaling amplitude calibration to match 3c273 for "+asdm
    os.system('rm -rf '+asdm+'.flux.cal')
    fluxscale(vis = asdm+'.ms.split',
                 caltable = asdm+'.amp.cal',
                 fluxtable = asdm+'.flux.cal',
                 reference = 'J1229+0203',
                 transfer = 'J1215+1654')

This new correctly-scaled flux table ".flux.cal" replaces the previous ".amp.cal" table as the correct amplitude calibration table to apply to the data, i.e., the ".flux.cal" contains both the time variability of the amplitude solved for in ".amp.cal" and the correct flux scaling set with fluxscale.

Now we plot the final phase and amplitude calibration tables for each data set. A well-behaved calibration table will show smooth variations as a function of time. Sudden jumps or wild variations among the antenna amplitude gains should prompt further investigation and possibly additional flagging.

# in CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    print "Plotting solutions for "+asdm
    plotcal(caltable = asdm+'.scanphase.gcal',
              xaxis = 'time', yaxis = 'phase',
              iteration = 'antenna', plotrange=[0,0,-180,180],
              showgui=False, subplot=421, figfile=asdm+'.scanphase.page1.png',
              antenna='', fontsize=6.0)
    # dummy_string = raw_input("Hit <Enter> to see next plot.")
    plotcal(caltable = asdm+'.scanphase.gcal',
              xaxis = 'time', yaxis = 'phase',
              iteration = 'antenna', plotrange=[0,0,-180,180],
              showgui=False, subplot=421, figfile=asdm+'.scanphase.page2.png',
              antenna='', fontsize=6.0)
    # dummy_string = raw_input("Hit <Enter> to see next plot.")
    plotcal(caltable = asdm+'.flux.cal', 
              xaxis = 'time',yaxis = 'amp',
              plotrange = [0,0,0,0],
              antenna='0~7', iteration='antenna',
              showgui=False, subplot=421, figfile=asdm+'.flux.page1.png',
              fontsize=6.0)
    # dummy_string = raw_input("Hit <Enter> to see next plot.")
    plotcal(caltable = asdm+'.flux.cal', 
              xaxis = 'time',yaxis = 'amp',
              plotrange = [0,0,0,0],
              antenna='', iteration='antenna', fontsize=6.0,
              showgui=False, subplot=421, figfile=asdm+'.flux.page2.png')
    # dummy_string = raw_input("Hit <Enter> to see next plot.")

Apply the Calibrations and Inspect

Now we will use applycal to apply the bandpass, phase, and amplitude calibration tables that we generated in the previous sections to the data. We apply the solutions to the target source.

#In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']
 
for asdm in basename:
    applycal(vis=asdm+'.ms.split',field='M100',
        interp=['nearest','linear','linear'],
        gaintable=[asdm+'.bandpass.bcal',asdm+'.scanphase.gcal',asdm+'.flux.cal'],
        spwmap = [[0,1,2,3],[0,1,2,3],[0,0,0,0]],
        gainfield=['J1229+0203','J1229+0203','J1215+1654'],flagbackup=F,calwt=F)

Here:

  • vis and field specify the measurement set and field to calibrate.
  • gaintable specifies the tables to apply to the data. There may be several tables applied all at once, here we apply the bandpass, phase, and flux calibrations.
  • interp specifies the type of interpolation used to match calibration tables to the data. If there are several gaintables then interp may be either a single value (e.g., "linear" or "nearest") or a list of values with size equal to the list of gaintables. In the case where interp is a list, applycal will match each element to the corresponding gaintable (e.g., first gaintable with first interp parameter).
  • gainfield specifies field from which to draw the calibration. As with interp, this can be a list of size matched to gaintable, so that the first element of gainfield will be the field used for the first table.
  • calwt indicates that the weights, which were derived from the Tsys measurements, should also be calibrated. Note that calwt is True by default.

Once calibrations are applied, it is important to go back and inspect the calibrated data. New problematic antennas or baselines may be visible after calibration. Repeat the steps above, focusing on the CORRECTED data column. Bear in mind that for any point source calibrators we now expect to find phase scattering around zero and to find flat amplitudes as a function of u-v distance. Look for outliers and other signatures of problematic data. As a general rule, you will want to incorporate these data into your overall flagging script then rerun the whole calibration process, so that reduction is iterative. If the data only represent a minor problem, however, it may not be terribly harmful to flag them after the fact so that they do not interfere with imaging but trust that the calibrations are mostly unaffected.


<figure id="plotms_amp_time_phasecal.png">

Calibrated amplitude vs. time plot for J1215+1654 (uid___A002_X5e971a_X124 dataset).

</figure>

# In CASA

basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3','uid___A002_X5e9ff1_X5b3', 
'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']
 
 
for asdm in basename:
    print "Examining calibrated data for "+asdm
    plotms(vis = asdm+'.ms.split', xaxis='uvdist', yaxis='amp',
	ydatacolumn='corrected', field='J1215+1654',
	averagedata=True, avgchannel='4080', avgtime='',
	avgscan=F, avgbaseline=F, coloraxis='corr')
    dummy_string = raw_input("Hit <Enter> for next plot.")
    plotms(vis = asdm+'.ms.split', xaxis='time', yaxis='amp',
	ydatacolumn='corrected', field='J1215+1654',
	averagedata=True, avgchannel='4080', avgtime='',
	avgscan=F, avgbaseline=F, coloraxis='corr')
    dummy_string = raw_input("Hit <Enter> for next plot.")
    plotms(vis = asdm+'.ms.split', xaxis='freq', yaxis='amp',
	ydatacolumn='corrected', field='J1215+1654',avgtime='1e8',
	avgchannel='', avgscan=F, avgbaseline=F, coloraxis='corr')
    dummy_string = raw_input("Hit <Enter> for next plot.")
    plotms(vis = asdm+'.ms.split', xaxis='time', yaxis='phase',
	ydatacolumn='corrected', field='J1215+1654',
	avgchannel='4080', avgscan=F, avgbaseline=F, coloraxis='corr')
    dummy_string = raw_input("Hit <Enter> for next plot [type 'stop'+<Enter> to break out].")
    # check if a stop has been requested
    if dummy_string == "stop":
        break

In <xr id="plotms_amp_time_phasecal.png"/>, we plot phase vs. channel and amp vs. time for J1215+1654 for the uid___A002_X5e971a_X124 dataset.

Finally we can use plotms to examine the corrected amplitude and phase of M100 as a function of time and uv-distance (plots not shown):

# In CASA
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    print "Examining calibrated data for "+asdm
    plotms(vis = asdm+'.split.ms', xaxis='uvdist', yaxis='amp',
	ydatacolumn='corrected', field='M100',
	averagedata=True, avgchannel='4080', avgtime='',
	avgscan=F, avgbaseline=F, coloraxis='corr')
    dummy_string = raw_input("Hit <Enter> for next plot.")
    plotms(vis = asdm+'.ms.split', xaxis='freq', yaxis='amp',
	ydatacolumn='corrected', field='M100',
	avgtime='1e8', avgscan=T, avgbaseline=F, coloraxis='corr')
    dummy_string = raw_input("Hit <Enter> for next plot.")

Split and Concatenate Data for M100 Mosaic

The individual data sets are now calibrated. We can safely split out the calibrated data for our science target and drop the calibrators. If we will smooth the data in frequency, averaging together groups of 5 channels by setting width=5 in split.

#In CASA

basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

for asdm in basename:
    os.system('rm -rf '+asdm+'.cal.ms')
    split(vis=name+'.split.ms',field='M100',outputvis=name+'-cal.ms',datacolumn = 'corrected',keepflags=F)

Before we do this, we will take a brief aside to remove Pointing information from the calibrated data. 
Normally, the pointing information would apply important corrections to be used while imaging the data. However, some aspects of this are still under development and the pointing information in these data interacts poorly with CASA. 
We will remove the pointing information using the CASA toolkit Table tool (tb). ''This kind of operation is dangerous and should not be a regular feature of your CASA reduction.''

<source lang="python">
# In CASA
 
basename=['uid___A002_X5e971a_X124','uid___A002_X5e971a_X2e7','uid___A002_X5e9ff1_X3f3',
'uid___A002_X5e9ff1_X5b3', 'uid___A002_X60b415_X44','uid___A002_X62f759_X4eb']

 
for asdm in basename:
    print "Manually removing pointing table from "+asdm+".cal.ms ... Please be careful!"
    tb.open(asdm+'.cal.ms/POINTING',nomodify=False)
    a = tb.rownumbers()
    tb.removerows(a)
    tb.close()
# In CASA

os.system('rm -rf M100_Band3_7m_CalibratedData.ms')
concat(vis=['X2e7-cal.ms','X3f3-cal.ms','X4eb-cal.ms','X5b3-cal.ms','X44-cal.ms','X124-cal.ms'],concatvis='M100_Band3_7m_CalibratedData.ms')

Imaging Mosaics

If you are unfamiliar with the basic concepts of deconvolution and clean, pause here and 
review for example http://www.aoc.nrao.edu/events/synthesis/2010/lectures/wilner_synthesis10.pdf

Mosaics like other kinds of images are created in the CASA task clean. To invoke mosaic mode, you simply set the parameter imagermode='mosaic'. The default subparameter ftmachine='mosaic' is then automatically set. This is a joint deconvolution algorithm that works in the uv-plane. A convolution of the primary beam patterns for each pointing in the mosaic is created: the primary beam response function. The corresponding image of the mosaic response function will be called <imagename>.flux.pbcoverage and <imagename>.flux (where the latter differs from the former only if the sensitivity of each field in the mosaic varies).

If you want to learn more about mosaicing, pause here and 
review for example http://www.aoc.nrao.edu/events/synthesis/2010/lectures/jott-mosaicking-school-04.pdf

Continuum subtraction

In these data, the continuum emission is too weak to contaminate the line emission (i.e. the peak continuum emission is less than the rms noise in the spectral line channels). Nevertheless, for illustrative purposes we demonstrate how to subtract the continuum emission in the uv-domain using the task uvcontsub2.

# In CASA
uvcontsub2(vis='M100_Band3_7m_CalibratedData.ms',fitspw='0;1:128~1850;2150~3951',fitorder = 1, combine = 'spw', spw = '0,1')

Here, fitspw gives the line-free channels for each mosaic and fitorder=1. The output MS will have .contsub appended to the name.

CO(1-0) Imaging

<figure id="M100_CO1_0_vel.png">

M100-7m CO(1-0) uv-spectrum in LSRK velocity space.

</figure>

Now we are ready to make cubes of the line emission. The imaging parameters are similar to the continuum except for those dealing with the spectral setup: mode, start, width, nchan, restfreq, and outframe parameters. When making spectral images you have three choices for the mode parameter: channel, velocity, and frequency. Data are taken using constant frequency channels. For spectral line analysis it's often more useful to have constant velocity channels, and this is also the best way to make images of multiple lines with the exact same channelization for later comparison. For mode='velocity', the desired start and width also need to be given in velocity units for the desired output frame.

It is important to note that ALMA does not do on-line Doppler Tracking and the native frame of the data is TOPO. If you do not specify outframe the output cube will also be in TOPO, which is not very useful for scientific analysis. The Doppler Shift is taken out during the regridding to the desired outframe in clean or alternatively it can be done separately by the cvel task which would need to be run before clean.

# In CASA
os.system('rm -rf M100.CO1_0_vel.png')
plotms(vis='M100_Band3_7m_CalibratedData.ms.contsub',xaxis='velocity',yaxis='amp',
       avgtime='1e8',avgscan=T,transform=T,freqframe='LSRK',
       restfreq='115.271201800GHz',plotfile='M100.CO1_0_vel.png')
# In CASA
os.system('rm -rf M100.7m.CO1_0Line*')
clean(vis='M100_Band3_7m_CalibratedData.ms.contsub',
     imagename='M100.7m.CO1_0Line.Clean',
     spw='0,1',field='',phasecenter = 'J2000 12h22m54.9s +15d49m10,
     mode='velocity',outframe='LSRK',restfreq='115.271201800GHz',
     nchan=70,start='1400km/s',width='5.0km/s',
     imagermode='mosaic',
     imsize=256,cell='1.5arcsec',minpb=0.2,
     interactive=T,usescratch=False,
     weighting='briggs',robust=0.5,
     threshold='5.0mJy'
     interactive = T,
     niter = 300)


Inspect the resulting data cube:

# In CASA
viewer('M100.7m.CO1_0Line.Clean.image')

Image Analysis : Moment Maps

<figure id="M100.7m.CO1_0_Line.Clean.image.mom0.png">

The CO(1-0) integrated intensity map (moment 0) of the M100 mosaic.

</figure> <figure id="M100.7m.CO1_0_Line.Clean.image.mom1.png">

The CO(1-0) velocity field (moment 1: color) and integrated intensity map (moment 0: contours) of the M100 mosaic.

</figure>

Next we will make moment maps for the CO(1-0) emission: Moment 0 is the integrated intensity; Moment 1 is the intensity weighted velocity field; and Moment 2 is the intensity weighted velocity dispersion.

Above we determined the rms noise levels for M100 mosaics in a line-free and a line-bright channel. We want to limit the channel range of the moment calculations to those channels with significant emission. One good way to do this is to open the cube in the viewer overlaid with 3-sigma contours, with sigma corresponding to the line-free rms.

# In CASA
imview(raster={'file': 'M100.7m.CO1_0_Line.Clean.image',
       'range': [-0.04,0.4]},
       contour={'file': 'M100.7m.CO1_0_Line.Clean.image',
       'levels': [0.004],'unit': 5})

We find a channel range for significant emission of 10~61.

For moment 0 (integrated intensity) maps you do not typically want to set a flux threshold because this will tend to noise bias your integrated intensity.

# In CASA
immoments('M100.7m.CO1_0_Line.Clean.image', 
          moments=[0],chans='10~61',
          outfile='M100.7m.CO1_0_Line.Clean.image.mom0')

For higher order moments it is very important to set a conservative flux threshold. Typically something like 3sigma, using sigma from a bright line channel works well. We do this with the mask parameter in the commands below. When making multiple moments, immoments appends the appropriate file name suffix to the value of outfile.

immoments('M100.7m.CO1_0_Line.Clean.image', 
          moments=[1,2],chans='10~61',
          includepix = [0.15,3.5],
          outfile='M100.7m.CO1_0_Line.Clean.image.mom')


Next we can see these moment maps from these images using imview.

# In CASA
os.system('rm -f M100.7m.CO1_0_Line.Clean.image.mom0.png')
imview (raster={'file': 'M100.7m.CO1_0_Line.Clean.image.mom0',
                 'colorwedge':T,'colormap': 'Rainbow 2'},
              contour = {'file': 'M100.7m.CO1_0_Line.Clean.image.mom1',
                 'levels': [-3, 3, 8, 15, 24, 33, 44, 55, 67, 81, 94, 109, 124],
                 'base': 0,
                 'unit': 1.6},
               out='M100.7m.CO1_0_Line.Clean.image.mom0.png')

==== Exporting Images to Fits ====

If you want to analyze the data using another software package it is easy to convert from CASA format to FITS. 

<source lang="python">
# In CASA
exportfits(imagename='M100.7m.CO1_0_Line.Clean.image',
     fitsimage='M100.7m.CO1_0_Line.Clean.image.fits')
exportfits(imagename='M100.7m.CO1_0_Line.Clean.image.mom0',
     fitsimage='M100.7m.CO1_0_Line.Clean.image.mom0.fits')
exportfits(imagename='M100.7m.CO1_0_Line.Clean.image.mom1',
     fitsimage='M100.7m.CO1_0_Line.Clean.image.mom1.fits')
exportfits(imagename='M100.7m.CO1_0_Line.Clean.image.mom2',
     fitsimage='M100.7m.CO1_0_Line.Clean.image.mom2.fits')


Although "FITS format" is supposed to be a standard, in fact most packages expect slightly different things from a FITS image. If you are having difficulty, try setting velocity=T and/or dropstokes=T.

Continue on to Combining Images with 7m, SD and 12m dataset

Now you can continue on to the M100_Band3_Combine_4.1.

Last checked on CASA Version 4.1.0.