AntennaeBand7 for CASA 3.3

Science Target Overview

Fig. 1. HST image of Antennae. White contours correspond to the CO(1-0) intensity map in Wilson et al. (2000) (see also Fig. 2). (Credit: NASA, ESA, and the Hubble Heritage Team STScI/AURA)-ESA/Hubble Collaboration. Acknowledgement: B. Whitmore ( Space Telescope Science Institute) and James Long (ESA/Hubble)

Fig. 2. Caltech millimeter array CO(1-0) integrated intensity map from Wilson et al. (2000).

The Antennae are a nearby (22 Mpc) pair of merging galaxies, NGC 4038 (RA 12h 01m 53.0s, Dec −18° 52′ 10″) in the north and NGC 4039 (RA 12h 01m 53.6s, Dec −18° 53′ 11″) in the south. These two spiral galaxies started to interact only a few hundred million years ago, making the Antennae one of the nearest and youngest examples of a major galaxy merger. The yellow bright components to the south and north of the image center of Figure 1 correspond to the nuclei of the original galaxies and are composed mostly of old stars. Dust filaments, which appear brown in the image, pervade the region between the two nuclei and a (blue) star-forming regions surrounded by HII regions can be seen throughout the system. Wilson et al. (2000) used OVRO to map CO(1-0) emission, a tracer of the bulk molecular gas distribution, with a resolution of 3.15″ x 4.91″ (Figures 1 and 2). Molecular emission is throughout the system and is particularly bright in the the "interaction region" between the nuclei, where it appears concentrated in five supergiant molecular complexes (see Figure 2).

ALMA Data Overview

[[File:antennae_foralmaCO3_2_north_withSV.png]|200px|thumb|right] [[File:antennae_foralmaCO3_2_withSV.png]|200px|thumb|right]

Band 7 ALMA Science verification data on the Antennae galaxies were taken in ten different datasets over several nights in May and June 2011, in different HA ranges to get good uv-coverage. Each dataset is typically a few hours long. The main aim of these observations was to observe the CO(3-2) line toward both galaxies and the overlapping region. There is also a partial ring of molecular gas to the west of NGC 4038, but this structure is not covered in our observations.

The datasets are listed below, classified as observations for the northern and southern nuclei (the interaction region is in the "southern" mosaic).

NGC 4038 (Northern mosaic)

• uid://A002/X1ff7b0/Xb
• uid://A002/X207fe4/X3a
• uid://A002/X207fe4/X3b9
• uid://A002/X2181fb/X49

NGC 4039 (Southern mosaic)

• uid://A002/X1ff7b0/X1c8
• uid://A002/X207fe4/X1f7
• uid://A002/X207fe4/X4d7
• uid://A002/X215db8/X1d5
• uid://A002/X215db8/X392
• uid://A002/X215db8/X18

These band 7 observations utilized mainly two basebands, which are associated with two different spectral windows: one in the Lower Sideband (USB) and one in the Upper Sideband (LSB). The former spectral window is centered on the CO(3-2) emission line. The additional spectral window is used to measure the continuum emission in the galaxy. Each spectral window has an effective total bandwidth of 1.875 GHz (1634 km/s) divided over 3840 channels (FDM mode). The channel width is 488.28 MHz (0.426 km/s), and the spectral resolution is twice this. For the antenna configuration that was used during these observations (intermediate between the extended and compact configurations for cycle 0), the angular resolution is about 1".

We acknowledge Junko Ueda for suggesting these Antennae observations for ALMA Science Verification, and for providing their SMA CO(3-2) data for Science Verification purposes (Ueda, Iono, Petitpas et al., in preparation, to be submitted to ApJ).

Obtaining the Data

To download the data, click on the region closest to your location:

North America Europe East Asia

Here you will find three gzipped tar files which, after unpacking, will create three directories:

• Antennae_Band7_UnCalibratedMSandTablesForReduction - Here we provide you with "starter" datasets, where we have taken the raw data in ALMA Science Data Model (ASDM) format and converted them to CASA Measurement Sets (MS). We did this using the importasdm task in CASA. Along with the raw data, we also provide some tables that you will need for the calibration. This functionality will be available in CASA for Early Science, but it is still under development.

• Antennae_Band7_CalibratedData - The fully-calibrated uvdata, ready for imaging

• Antennae_Band7_ReferenceImages - The final continuum and spectral line images

To see which files you will need, read on below. The downloads to your local computer will take some time, so you may wish to begin them now.

NOTE: CASA 3.2.1 or later is required to follow this guide. For more information on obtaining the latest version of CASA, see http://casa.nrao.edu.

Antennae Band 7 Data Reduction Tutorial

In this tutorial, or "casaguide", we will guide you step-by-step through the reduction of the ALMA science verification data on the Antennae galaxies and its subsequent imaging. This casaguide consists of two parts:

1) Antennae Band7 - Calibration

2) Antennae Band7 - Imaging

To complete the Calibration section of the tutorial, you will need the data in the first directory: Antennae_Band7_UnCalibratedMSandTablesForReduction. For those wishing to skip the calibration section and proceed to Imaging, we also provide the fully-calibrated data in the Antennae_Band7_CalibratedData directory. Finally, we provide the final continuum and spectral line images in the Antennae_Band7_ReferenceImages directory.

NOTE: These guides are dynamic and will evolve as our understanding of how best to reduce ALMA data improves. Check back for updates periodically.

For a similar tutorial on the reduction of ALMA Band 7 data on TW Hydra, and Band 3 on NGC 3256, see the casaguides TWHydraBand7 and NGC3256Band3.

How to use this casaguide

For both portions of the guide, we will provide you with the full CASA commands needed to carry out each step.

# In CASA
The commands you need to execute 
will be displayed in regions 
like this.

Simply copy and paste the commands in order into your CASA terminal. Be careful with the tabs in the 'for' loops, as this is part of the python format. You may also type the commands in by hand if desired, but be mindful of typos. In loops, note that you may need to hit Enter twice in order for the process to start running. Also note that copying and pasting multiple commands at a time may not work, so only copy and paste the contents of one region at a time.

To learn how to extract the CASA commands into an executable python script, click here.

Occasionally we will also show output to the CASA logger:

This output will be displayed 
in regions like this.

Other relevant information will be presented in the following format:

This color shows you background information about the data or other types of reference material

For a brief introduction to the different ways CASA can be run, see the EVLA_Spectral_Line_Calibration_IRC+10216#How_to_Use_This_casaguide page. For further help getting started with CASA, see Getting_Started_in_CASA.

Daniel Espada 12:00 UT, 27 July 2011