NGC 5921: red-shifted HI emission 6.5.2: Difference between revisions

From CASA Guides
Jump to navigationJump to search
← Older edit
Rminchin (talk | contribs)
213 edits
Rminchin (talk | contribs)
213 edits
 
(99 intermediate revisions by 2 users not shown)
Line 1: Line 1:
This version is being edited. See [[NGC 5921: red-shifted HI emission]] for the current version of this cookbook!
  Disclaimer: Due to continuous CASA software updates, GUI images may look different on more recent versions than those shown here.
  Disclaimer: Due to continuous CASA software updates, GUI images may look different on more recent versions than those shown here.


This guide is meant to be used with monolithic CASA and not pip-wheel, because the GUIs are not necessarily validated.


We would like to note that the CASAviewer has not been maintained for a few years anymore and will be removed from future versions of CASA.
The NRAO replacement visualization tool for images and cubes is CARTA, the “Cube Analysis and Rendering Tool for Astronomy”. It is available from the [https://cartavis.org/ CARTA website]. We strongly recommend using CARTA, as it provides a much more efficient, stable, and feature rich user experience. A comparison of the CASAviewer and CARTA, as well as instructions on how to use CARTA at NRAO is provided in the [https://casadocs.readthedocs.io/en/stable/notebooks/carta.html relevant section of CASA docs]. This tutorial shows figures generated with CARTA for visualization.


[[Category: VLA]] [[Category: Calibration]] [[Category: Imaging]] [[Category: Spectral Line]]
[[Category: VLA]] [[Category: Calibration]] [[Category: Imaging]] [[Category: Spectral Line]]


{{Checked 5.7.2}}
<div style="background-color: #CCFF99;">
Last checked on CASA Version 6.5.2.
</div>


== Overview ==
== Overview ==


The technique used to calibrate and image continuum datasets generally applies to spectral line observations, except that an additional calibration step is required. '''Bandpass calibration''' flattens the spectral response of the observations, ensuring that spectral channel images are properly calibrated in amplitude and phase.
The technique used to calibrate and image continuum datasets generally applies to spectral line observations, except that an additional calibration step is required. '''Bandpass calibration''' flattens the spectral response of the observations, ensuring that spectral channel images are properly calibrated in amplitude and phase.  


The following tutorial derives from an annotated script provided in the [http://casa.nrao.edu/ref_cookbook.shtml CASA Cookbook]. The script is largely reproduced and additionally annotated with figures and illustrations. It is assumed that this tutorial will be used interactively, and so interactive pauses in the original script have been removed.
The following tutorial derives from an annotated script originally provided in the [http://casa.nrao.edu/ref_cookbook.shtml CASA Cookbook].


'''DATA''': The data are included with the CASA installation.
'''DATA''': The data are included with the CASA installation.
Line 42: Line 45:
</source>
</source>
 
 
To help clean up the bookkeeping and further avoid issues of write privileges, remove any prior versions of the measurement set and calibration tables. This should be done with the [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.manipulation.rmtables.html rmtables] task, either interactively or using ''rmtables('table_name')'', in preference to the operating system ''rm -rf'' command, as rmtables also clears data in the CASA cache.
To help clean up the bookkeeping and further avoid issues of write privileges, remove any prior versions of the measurement set and calibration tables. This should be done with the [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.manipulation.rmtables.html rmtables] task, either interactively or using ''rmtables('table_name')'', in preference to the operating system ''rm -rf'' command, as rmtables also clears data in the CASA cache.


== Import the data ==
== Import the data ==


The next step is to import the multisource UVFITS data to a CASA measurement set via the [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.data.importuvfits.html importuvfits] task. This task is used to read in data UVFITS data from the legacy VLA or other telescope; for reading in EVLA data in ASDM format the task [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.data.importasdm.html importasdm] would be used.  
The next step is to import the multisource UVFITS data to a CASA measurement set via the [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.data.importuvfits.html importuvfits] task. This task is used to read in data UVFITS data from the legacy VLA or other telescope; for reading in EVLA data in ASDM format the task [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.data.importasdm.html importasdm] would be used.  


Note that you can set each parameter for any particular task one-by-one ('interactive CASA', or you can supply the task and input parameters with a single command ('pseudo-interactive CASA').
Note that you can set each parameter for any particular task one-by-one ('interactive CASA', or you can supply the task and input parameters with a single command ('pseudo-interactive CASA').
Line 78: Line 81:


A few things to note:
A few things to note:
* The first [https://casadocs.readthedocs.io/en/stable/api/casashell/inp.html inp] reveals three parameters with defaults fitsfile='&thinsp;'; vis='&thinsp;'; antnamescheme='old'. We only set two of these, leaving antnamescheme='old' set to the default.
* The first [https://casadocs.readthedocs.io/en/v6.5.2/api/casashell/inp.html inp] reveals three parameters with defaults fitsfile='&thinsp;'; vis='&thinsp;'; antnamescheme='old'.
* fitsfile=fitsdata sets the value of fitsfile to the fitsdata string variable defined earlier. If you were using your own dataset, you could enter it directly as a string (e.g., fitsfile='mydata.fits') or define it as a variable before setting fitsfile (e.g. fitsdata='mydata.fits', then fitsfile=fitsdata). You should avoid using 'fitsfile' as a variable name, as this will be overwritten by 'default importuvfits' or 'tget importuvfits'.
* fitsfile=fitsdata sets the value of fitsfile to the fitsdata string variable defined earlier. If you were using your own dataset, you could enter it directly as a string (e.g., fitsfile='mydata.fits') or define it as a variable before setting fitsfile (e.g. fitsdata='mydata.fits', then fitsfile=fitsdata). You should avoid using 'fitsfile' as a variable name, as this will be overwritten by 'default importuvfits' or 'tget importuvfits'.
* The second [https://casadocs.readthedocs.io/en/stable/api/casashell/inp.html inp] shows that the string variable fitsdata, defined earlier, has been expanded. A valid entry shows in blue, while an invalid entry shows in red. Default entries (as for antnamescheme) show in black.
* The second [https://casadocs.readthedocs.io/en/v6.5.2/api/casashell/inp.html inp] shows that the string variable fitsdata, defined earlier, has been expanded. A valid entry shows in blue, while an invalid entry shows in red. Default entries (as for antnamescheme in the initial listing of inputs) show in black.


== Inspecting the data ==
== Inspecting the data ==


The next step is to inspect to measurement set using the [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.information.listobs.html listobs] task. This provides almost all relevant observational parameters &ndash; to the extent that the exist in the dataset &ndash; such as correlator setup (frequencies, bandwidths, channel number and widths, polarization products), sources, scans, scan intents, and antenna locations. Setting verbose=True (the default, so not included in the commands below) will display all of the contents of the raw data and setting listfile='listobs.txt' will create a text file you can refer to later (if this is not set, the output will instead display in the CASA Logger). Some of the parameters (such as scan intents) are not available for legacy VLA data such as this, so are left blank in the output.
The next step is to inspect to measurement set using the [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.information.listobs.html listobs] task. This provides almost all relevant observational parameters &ndash; to the extent that the exist in the dataset &ndash; such as correlator setup (frequencies, bandwidths, channel number and widths, polarization products), sources, scans, scan intents, and antenna locations. Setting verbose=True (the default, so not included in the commands below) will display all of the contents of the raw data and setting listfile='listobs.txt' will create a text file you can refer to later (if this is not set, the output will instead display in the CASA Logger). Some of the parameters (such as scan intents) are not available for legacy VLA data such as this, so are left blank in the output.


<pre style="background-color: #d8bfd8;">
<pre style="background-color: #d8bfd8;">
Line 168: Line 171:
=== Key information from listobs ===
=== Key information from listobs ===


The output of [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.information.listobs.html listobs] is dense with information, but some facts to note are (working down the file):
The output of [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.information.listobs.html listobs] is dense with information, but some facts to note are (working down the file):


* The observations were taken on 13 April 1995 between 09:18:45 and 10:47:15
* The observations were taken on 13 April 1995 between 09:18:45 and 10:47:15
Line 236: Line 239:


===Antenna positions===
===Antenna positions===
[[file:plotants_6.5.2.png|thumb|Plotants output. Click to enlarge.]]


The antenna positions are given in the output from listobs, but a graphical display can be easier to understand and aid in selecting a good reference antenna. This can be plotted using the [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.visualization.plotants.html plotants] task.
The antenna positions are given in the output from listobs, but a graphical display can be easier to understand and aid in selecting a good reference antenna. This can be plotted using the [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.visualization.plotants.html plotants] task.


<pre style="background-color: #d8bfd8;">
<pre style="background-color: #d8bfd8;">
Line 263: Line 267:
== Flagging ==
== Flagging ==


The next step is to flag the data, for which we use the task [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.flagging.flagdata.html flagdata]. Flagging is a large topic, so for more details see the [[VLA CASA Flagging]] Topical CASA Guide.
The next step is to flag the data, for which we use the task [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.flagging.flagdata.html flagdata]. Flagging is a large topic, so for more details see the [[VLA CASA Flagging]] Topical CASA Guide.


=== Flag the autocorrelations ===
=== Flag the autocorrelations ===
Line 286: Line 290:
CASA issues a warning when running this command, as it is having to make assumptions about the data due to information not being available in legacy VLA files. This can be safely ignored.
CASA issues a warning when running this command, as it is having to make assumptions about the data due to information not being available in legacy VLA files. This can be safely ignored.


If you run this in interactive mode, you will see that there are a lot of options for this task. We're going to use many of them later, but for now we just use vis to set the input measurement set and autocorr=True to say that we want to flag the autocorrelations. One parameter to check is flagbackup=True (which should be set by default). This backs up the flag state ''before'' carrying out the requested operation, allowing you to roll back to an earlier state using [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.flagging.flagmanager.html flagmanager]. It is good practice when flagging to note which flagbackup version is associated with which flagging commands in your data reduction log.
If you run this in interactive mode, you will see that there are a lot of options for this task. We're going to use many of them later, but for now we just use vis to set the input measurement set and autocorr=True to say that we want to flag the autocorrelations. One parameter to check is flagbackup=True (which should be set by default). This backs up the flag state ''before'' carrying out the requested operation, allowing you to roll back to an earlier state using [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.flagging.flagmanager.html flagmanager]. It is good practice when flagging to note which flagbackup version is associated with which flagging commands in your data reduction log.


=== Quack flagging ===
=== Quack flagging ===
Line 314: Line 318:
=== Interactive flagging ===
=== Interactive flagging ===


[[file:spectrum-flagging.png|thumb|Plotms settings for flagging spectral line data. Click to enlarge.]]
We use [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casaplotms.plotms.html plotms] to inspect the spectral line data. While plotms allows flagging inside the graphical interface, this does ''not'' write flagbackup files; we can use plotms to visualize the data in conjunction with using flagdata to actually set the flags in order to have flagbackup files.
 
We use [https://casadocs.readthedocs.io/en/stable/api/tt/casaplotms.plotms.html plotms] to inspect the spectral line data. While plotms allows flagging inside the graphical interface, this does ''not'' write flagbackup files; we can use plotms to visualize the data in conjunction with using flagdata to actually set the flags in order to have flagbackup files.


To start plotms, you can simply run
To start plotms, you can simply run
Line 357: Line 359:
Alternatively, this can be changed in the plotms GUI.  
Alternatively, this can be changed in the plotms GUI.  


The resulting plot shows that there is good signal on channels 6 to 56, which we can specify using spw='0:6~56'. There does not appear to be any visible RFI on this field; before moving on it's worth checking the other fields for RFI as well. This can be done from the GUI or using:
[[file:amp_vs_channel_6.5.2.png|thumb|Amplitude vs channel shown in plotms. Click to enlarge.]]
 
The resulting plot (see figure) shows that there is good signal on channels 6 to 56, which we can specify using spw='0:6~56'. There does not appear to be any visible RFI on this field; before moving on it's worth checking the other fields for RFI as well. This can be done from the GUI or using:


<pre style="background-color: #d8bfd8;">
<pre style="background-color: #d8bfd8;">
Line 385: Line 389:
</source>
</source>


This plots amplitude against time. We can see from the colored striping on the sources that different baselines (coloraxis='baseline' means the different colors represent different baselines) have slightly different amplitudes, including one baseline (pink on the example plot) that is always high.  
This plots amplitude against time (see figure). We can see from the colored striping on the sources that different baselines (coloraxis='baseline' means the different colors represent different baselines) have slightly different amplitudes, including one baseline (pink on the example plot) that is always high.  
 
[[file:amp_vs_time_6.5.2.png|thumb|Amplitude vs time plotted with plotms. Click to enlarge.]]


We can draw a box around some of those pink points in plotms by clicking the '''mark regions'''  [[Image:MarkRegionsButton.png]] tool to select that function and then drawing a box on the screen to mark a region. This may take a few seconds to return, but eventually the box will be filled with dots showing it has been selected. The points within the marked region can then be inspected using the '''locate''' [[File:casaplotms-locate-tool.png]] tool to the right of the region buttons. This outputs information on the selected points to the CASA logger. Once you are finished with a marked region, you should clear it with the '''clear regions''' [[File:Casaplotms-clear-region.png]] tool (attempting to change the plot while a marked region is present will often crash plotms).
We can draw a box around some of those pink points in plotms by clicking the '''mark regions'''  [[Image:MarkRegionsButton.png]] tool to select that function and then drawing a box on the screen to mark a region. This may take a few seconds to return, but eventually the box will be filled with dots showing it has been selected. The points within the marked region can then be inspected using the '''locate''' [[File:casaplotms-locate-tool.png]] tool to the right of the region buttons. This outputs information on the selected points to the CASA logger. Once you are finished with a marked region, you should clear it with the '''clear regions''' [[File:Casaplotms-clear-region.png]] tool (attempting to change the plot while a marked region is present will often crash plotms).
Line 401: Line 407:


It can be seen that although the data is slightly high on the LL correlation of this baseline, it isn't particularly noisy. We have not yet calibrated this data, so some variation is possible. It does not look like this is a bad baseline/correlation, but rather that this will be dealt with by calibration.
It can be seen that although the data is slightly high on the LL correlation of this baseline, it isn't particularly noisy. We have not yet calibrated this data, so some variation is possible. It does not look like this is a bad baseline/correlation, but rather that this will be dealt with by calibration.
<div style="padding-left: 50px; background-color: #F8F9FA;">
'''Flagging data:'''
[[file:spectrum-flagging.png|thumb|Plotms settings for flagging spectral line data. Click to enlarge.]]


If we did want to flag this data, we could either do so within plotms using the '''flag''' [[File:FlagThoseData.png]] tool or we could use flagdata again. If flagging baselines within plotms, you should ensure that you flag all of the channels; to do this, under the '''Flag''' tab, specify '''Extend flags''' to '''Channel''' (obviously, if flagging RFI channels you should not to this). You can read more in the tutorial on [[data flagging with plotms]]. However, if you want flag backups to be created (which is a good idea), you need to flag using flagdata rather than plotms. This can be done using:
If we did want to flag this data, we could either do so within plotms using the '''flag''' [[File:FlagThoseData.png]] tool or we could use flagdata again. If flagging baselines within plotms, you should ensure that you flag all of the channels; to do this, under the '''Flag''' tab, specify '''Extend flags''' to '''Channel''' (obviously, if flagging RFI channels you should not to this). You can read more in the tutorial on [[data flagging with plotms]]. However, if you want flag backups to be created (which is a good idea), you need to flag using flagdata rather than plotms. This can be done using:
Line 416: Line 427:


If executed, this would flag the left-hand correlation of the baseline between antennas VA12 and VA21. Other fields displayed by 'inp' in the section under "mode = 'manual'" can be used to set other data selection parameters, such as spw and timerange, so you can select the data to be flagged. If you control plotms from the GUI, you can identify data to be flagged using the '''mark regions''' and '''locate''' tools and then enter the appropriate parameters into flagdata to flag that data; when running like this you can use 'plotms' at the command line to restart it if it crashes, but while flagdata is the active task 'go' will execute flagdata rather than starting plotms.
If executed, this would flag the left-hand correlation of the baseline between antennas VA12 and VA21. Other fields displayed by 'inp' in the section under "mode = 'manual'" can be used to set other data selection parameters, such as spw and timerange, so you can select the data to be flagged. If you control plotms from the GUI, you can identify data to be flagged using the '''mark regions''' and '''locate''' tools and then enter the appropriate parameters into flagdata to flag that data; when running like this you can use 'plotms' at the command line to restart it if it crashes, but while flagdata is the active task 'go' will execute flagdata rather than starting plotms.
</div>


== Calibration ==
== Calibration ==


Calibration of spectral line data broadly follows the approach for [[Calibrating a VLA 5 GHz continuum survey | continuum data]], except that the amplitude and phase corrections are a function of frequency and so must be corrected by '''bandpass calibration.''' The basic calibration steps follow.
Calibration of spectral line data broadly follows the approach for [[Calibrating a VLA 5 GHz continuum survey | continuum data]], except that the amplitude and phase corrections are a function of frequency and so must be corrected by '''bandpass calibration.''' The basic calibration steps follow.
* [[#Setting the Flux Scale | Set the flux scale]] of the primary calibrator, here, 1331+305 = 3C 286.
* [[#Setting the flux scale | Set the flux scale]] of the primary calibrator, here, 1331+305 = 3C 286.
* [[#A priori calibration| ''A priori'' calibration]]
* [[#A priori calibration| ''A priori'' calibration]]
* [[#Bandpass calibration | Determine bandpass corrections]] based on the primary calibrator. In the script that follows, the bandpass calibration will be stored in ''ngc5921.demo.bcal''.
* [[#Bandpass calibration | Determine bandpass corrections]] based on the primary calibrator. In the script that follows, the bandpass calibration will be stored in ''bandpass.cal''.
* [[#Inspect the Bandpass Response Curve | Inspect the bandpass correction]] to determine viable channels for averaging and imaging. We want to toss out end channels where the response is poor.
* [[#Inspect the bandpass response curve | Inspect the bandpass calibration]] for problems and to determine viable channels for averaging and imaging. We want to toss out end channels where the response is poor.
* [[#Gain Calibration | Determine the gain calibrations]] on the bandpass-corrected and channel-averaged data. In this step, we effectively turn the spectral line data into a single-channel continuum data set and calibrate accordingly. The calibration is first stored in ''ngc5921.demo.gcal''. In the second part of this step we correct the fluxscale of the .gcal table, and store the final calibration solutions with correct fluxes in ''ngc5921.demo.fluxscale'' (this is the table that needs to be applied later to the data, not the .gcal version).
* [[#Gain calibration | Determine the gain calibrations]] on the bandpass-corrected and channel-averaged data. In this step, we effectively turn the spectral line data into a single-channel continuum data set and calibrate accordingly. The calibration is first stored in ''apcal.gcal''. In the second part of this step we correct the fluxscale of the apcal table, and store the final calibration solutions with correct fluxes in ''fluxscale.cal'' (this is the table that needs to be applied later to the data, not the apcal.gcal version).
* [[#Inspect the Calibration Solutions | Inspect the gain calibration solutions]] to look for any aberrant solutions that hint at bad calibrator data.
* [[#Inspect the Calibration Solutions | Inspect the gain calibration solutions]] to look for any aberrant solutions that hint at bad calibrator data.
* [[#Apply the Solutions | Apply the calibration solutions]] to the source (N5921_2). This action literally adds a new column of data to the measurement set. This new column contains the data with the gain calibration and bandpass calibration applied, but it does not overwrite the raw data in case the calibration needs revision.
* [[#Apply the Solutions | Apply the calibration solutions]] to the source (N5921_2). This action literally adds a new column of data to the measurement set. This new column contains the data with the gain calibration and bandpass calibration applied, but it does not overwrite the raw data in case the calibration needs revision.


=== Setting the Flux Scale ===
=== Setting the flux scale ===


The [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.imaging.setjy.html setjy] task generates a source model for the primary calibrator, 1331+305 = 3C286. From CASA 5.3 onwards, the default standard is Perley-Butler 2017 and includes resolved structure of the calibrators. This is 1.4GHz D-config and 1331+305 is sufficiently unresolved that, in principle, we don't need a model image; however, here we proceed with applying the detailed model, as a good practice. Setjy also looks up the radio SED for common flux calibrators and automatically assigns the total flux density.
The [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.imaging.setjy.html setjy] task generates a source model for the primary calibrator, 1331+305 = 3C286. From CASA 5.3 onwards, the default standard is Perley-Butler 2017 and includes resolved structure of the calibrators. This is 1.4GHz D-config and 1331+305 is sufficiently unresolved that, in principle, we don't need a model image; however, here we proceed with applying the detailed model, as a good practice. Setjy also looks up the radio SED for common flux calibrators and automatically assigns the total flux density.


We can first get a listing of the available models. Setjy will look within the CASA working directory for files matching *.im* and *.mod*, i.e. user-defined images or models, and in the CalModels directory of the installation. Here we will want to apply a model from CalModels but, in principle, it is possible to use a user-defined model instead.
We can first get a listing of the available models. Setjy will look within the CASA working directory for files matching *.im* and *.mod*, i.e. user-defined images or models, and in the CalModels directory of the installation. Here we will want to apply a model from CalModels but, in principle, it is possible to use a user-defined model instead.
Line 511: Line 523:
A summary of the operation is sent to the logger window. Here's a listing of the output.
A summary of the operation is sent to the logger window. Here's a listing of the output.


<pre>
<pre style="background-color: #fffacd;">
2022-12-02 00:32:41 INFO setjy ##########################################
2022-12-02 00:32:41 INFO setjy ##########################################
2022-12-02 00:32:41 INFO setjy ##### Begin Task: setjy              #####
2022-12-02 00:32:41 INFO setjy ##### Begin Task: setjy              #####
Line 537: Line 549:
===''A priori'' calibration===
===''A priori'' calibration===


The [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.calibration.gencal.html gencal] task carries out general calibrations using information that is known prior to inspecting the data, and thus known as ''a priori'' calibration. We can use it to apply the antenna gain curve and (if necessary) correct the antenna positions.  
The [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.gencal.html gencal] task carries out general calibrations using information that is known prior to inspecting the data, and thus known as ''a priori'' calibration. We can use it to apply the antenna gain curve and (if necessary) correct the antenna positions.  


'''Antenna gain-elevation curve calibration'''
'''Antenna gain-elevation curve calibration'''
Line 566: Line 578:
</pre>
</pre>


<div style="padding-left: 50px; background-color: #F8F9FA;">
'''Antenna position corrections'''
'''Antenna position corrections'''


Unlike the EVLA, where antenna position offsets can be looked up automatically and applied by gencal using caltype='antpos', you need to look up and apply these corrections manually for the legacy VLA. If needed, and if we have the necessary information, we can correct the antenna positions using gencal with caltype='antposvla'. This takes the offsets to be applied (dBx, dBy, dBz) in meters for a specified antenna. Please see the [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.calibration.gencal.html gencal] documentation for further information.
Unlike the EVLA, where antenna position offsets can be looked up automatically and applied by gencal using caltype='antpos', you need to look up and apply these corrections manually for the legacy VLA. If needed, and if we have the necessary information, we can correct the antenna positions using gencal with caltype='antposvla'. This takes the offsets to be applied (dBx, dBy, dBz) in meters for a specified antenna. Please see the [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.gencal.html gencal] documentation for further information.
</div>


=== Bandpass calibration ===
=== Bandpass calibration ===
Line 613: Line 628:
In the [[#Gain Calibration | gain calibration]] to follow, we will effectively convert the spectral line data into a continuum data set. Before proceeding, we need to inspect the bandpass calibration to make sure that it contains no bad values and also to inspect which channels to average to produce the continuum data.   
In the [[#Gain Calibration | gain calibration]] to follow, we will effectively convert the spectral line data into a continuum data set. Before proceeding, we need to inspect the bandpass calibration to make sure that it contains no bad values and also to inspect which channels to average to produce the continuum data.   


We will plot the [https://casadocs.readthedocs.io/en/stable/api/tt/casatasks.calibration.bandpass.html bandpass] solutions as amplitude vs channel and phase vs channel per antenna. Start by looking at the amplitudes. These should be smooth across the channels. You will see the edge channels have lower amplitudes due to the edges of the bandpass being less sensitive.
We will plot the [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.bandpass.html bandpass] solutions as amplitude vs channel and phase vs channel per antenna. Start by looking at the amplitudes. These should be smooth across the channels. You will see the edge channels have lower amplitudes due to the edges of the bandpass being less sensitive.


<pre style="background-color: #d8bfd8;">
<pre style="background-color: #d8bfd8;">
Line 650: Line 665:
</pre>
</pre>


This creates a 3x3 grid showing the amplitude on each antenna, with 9 antennas per page. You can scroll through the antennas using the green arrows at the bottom of the plotms GUI. Note that antenna VA23 in position VLA:OUT is displayed blank (it was not in the array at the time) and antenna VA28 is shown on a fourth page. This is not a problem. Looking at the amplitudes confirms our earlier observation that channels 6 to 56 (spw='0:6~56') look good. We will use this spw setting again in the later calibration stages.
[[file:gainamp_vs_channel_6.5.2.png|thumb|Amplitude vs channel plotted in a 3&times;3 grid in plotms. Click to enlarge.]]
 
This creates a 3&times;33 grid showing the amplitude on each antenna, with 9 antennas per page. You can scroll through the antennas using the green arrows at the bottom of the plotms GUI. Note that antenna VA23 in position VLA:OUT is displayed blank (it was not in the array at the time) and antenna VA28 is shown on a fourth page. This is not a problem. Looking at the amplitudes confirms our earlier observation that channels 6 to 56 (spw='0:6~56') look good. We will use this spw setting again in the later calibration stages.


You may see the phases vs channel by changing the yaxis to phase interactively, or using the commands below. The phases should be relatively flat and continuous. Note that the phases do wander a bit at the edges of the bandpass where the amplitudes are lower. Some phases (e.g. on antenna VA10) wrap around between -180 and +180 – this is not a real discontinuity. VA15 has a very small variation in phases because it was used as the reference antenna.
You may see the phases vs channel by changing the yaxis to phase interactively, or using the commands below. The phases should be relatively flat and continuous. Note that the phases do wander a bit at the edges of the bandpass where the amplitudes are lower. Some phases (e.g. on antenna VA10) wrap around between -180 and +180 – this is not a real discontinuity. VA15 has a very small variation in phases because it was used as the reference antenna.
[[file:gainphase_vs_channel_6.5.2.png|thumb|Phase vs channel plotted in a 3&times;3 grid in plotms. Click to enlarge.]]


<pre style="background-color: #d8bfd8;">
<pre style="background-color: #d8bfd8;">
Line 707: Line 726:
-->
-->


=== Complex gain calibration ===
=== Gain calibration ===
 
From our [#Inspect the bandpass response curve  | inspection of the bandpass response curve]], we can average channels 6 to 56 to produce continuum-like data for the calibrators. This averaging is specified through the '''spw''' (spectral window) parameter, which takes the form IF:Channel-range, as follows.
 
<source lang="python">
spw = '0:6~56'
</source>


That is, there is only one spectral window (IF), '''spw = 0''', and we want to average channels '''6~56''' within that spectral window.
From our [[#Inspect the bandpass response curve  | inspection of the bandpass response curve]], we can average channels 6 to 56 to produce continuum-like data for the calibrators. This averaging is specified through the '''spw''' (spectral window) parameter in the form spw = '0:6~56'. This specifies the spectral window (IF) to be used as '''0''' (there is only one spectral window in this measurement set, as seen in the listobs output) and channels '''6~56''' within that spectral window.


Gain calibrations are otherwise determined as for [[Calibrating a VLA 5 GHz continuum survey#Calibration | continuum data]].  
Gain calibrations are otherwise determined as for [[Calibrating a VLA 5 GHz continuum survey#Calibration | continuum data]].  
* {{gaincal}}() is run only on the calibrators, 1331+305 (flux calibrator) and 1445+099 (phase calibrator).
* [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.gaincal.html gaincal] is run only on the calibrators, 1331+305 (flux calibrator) and 1445+099 (phase calibrator).
* The default model for gain calibrations is a 1 Jy point-source. The flux scale is overridden by {{setjy}}, which has been performed for the flux calibrator. We need to transfer that flux scale to the phase calibrator using {{fluxscale}}().   
* The default model for gain calibrations is a 1 Jy point source. The flux scale is overridden by [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.imaging.setjy.html setjy], which has been performed for the flux calibrator. We need to transfer that flux scale to the phase calibrator using [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.fluxscale.html fluxscale].   
* Note that fluxscale() determines the flux density of the phase calibrator and accordingly adjusts its model and calibration solutions. A report of the results are sent to the logger window.
* Note that fluxscale determines the flux density of the phase calibrator and accordingly adjusts its model and calibration solutions. A report of the results are sent to the logger window.
* Unless you use parameter ''incremental=True'' while executing {{fluxscale}}() (the default is ''False''), the resulting .fluxscale table will replace the .gcal table at this point. This particularly important in the {{applycal}}() stage.
* Unless you use parameter ''incremental=True'' while executing fluxscale (the default is ''False''), the resulting fluxscale.cal table will replace the apcal.gcal table at this point. This is particularly important when it comes to applying the calibration tables to the data in the [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.applycal.html applycal] stage.


''' Complex Gain Calibration '''
'''Complex gain calibration'''


Next we will calibrate the amplitude and phases of the data using the [https://casadocs.readthedocs.io/en/v6.2.0/api/tt/casatasks.calibration.bandpass.html bandpass] and complex gain calibrators. To do this we will use [https://casadocs.readthedocs.io/en/v6.2.0/api/tt/casatasks.calibration.gaincal.html gaincal] and the previously made calibration tables. This will give us antenna based solutions that will show variations across time.
First, we will calibrate the amplitude and phases of the data using the flux/bandpass and complex gain calibrators. To do this we will use [https://casadocs.readthedocs.io/en/v6.2.0/api/tt/casatasks.calibration.gaincal.html gaincal] and the previously-made calibration tables. This will give us antenna-based solutions that will show variations across time.


<pre style="background-color: #d8bfd8;">
<pre style="background-color: #d8bfd8;">
Line 760: Line 773:
</pre>
</pre>


Now look at solutions. First we will look at the phase solutions. These should be at zero with no phase jumps; phase jumps are when the phases change drastically with time. When this happens we are not able to interpolate the phases surrounding that scan that has the phase jump.
[[File:cg_phase_before_casa540.png|200px|thumb|right|Plot of complex gain phase vs time from plotms. Click to enlarge.]]
<pre style="background-color: #d8bfd8;">
# Interactive CASA
default plotms
inp
vis='apcal.gcal'
xaxis='time'
yaxis='phase'
iteraxis='antenna'
coloraxis='corr'
gridrows=3
gridcols=3
plotrange=[0,0,-180,180]
inp
go
</pre>


<source lang="python">
<source lang="python">
# Now we will transfer the flux scale to the phase calibrator.
# Psuedo-interactive CASA
# We will be using 1331+305 (the source we did setjy on) as our flux standard reference.
# Note its extended name as in the FIELD table summary above (it has a VLA seq number appended)


fluxscale(vis='ngc5921.demo.ms', fluxtable='ngc5921.demo.fluxscale', caltable='ngc5921.demo.gcal', reference='1331*', transfer='1445*')
plotms(vis='apcal.gcal',xaxis='time',yaxis='phase',iteraxis='antenna',gridrows=3,gridcols=3,plotrange=[0,0,-180,180])
</source>
</source>


<!--
<pre style="background-color:lightgrey;">
Where:
    vis='apcal.gcal'              # the complex gain calibration table
    xaxis='time'                  # plot channels across the x axis
    yaxis='phase'                # plot amplitudes across the y axis
    iteraxis='antenna'            # pages the plots by antenna
    coloraxis='corr'              # colorizes the plots by correlation (RR and LL)
    gridrows=3                    # places 3 antennas per row
    gridcols=3                    # places 3 antennas per column
    plotrange=[0,0,-180,180]      # sets the plot range
</pre>
 
Now look at the amplitudes to see if there are any irregularities there.
 
<pre style="background-color: #d8bfd8;">
# Interactive CASA
default plotms
inp
vis='apcal.gcal'
xaxis='time'
yaxis='amp'
iteraxis='antenna'
coloraxis='corr'
gridrows=3
gridcols=3
xselfscale=True
yselfscale=True
inp
go
</pre>
 
<source lang="python">
<source lang="python">
default('gaincal')
# Psuedo-interactive CASA


vis = msfile
plotms(vis='apcal.gcal',xaxis='time',yaxis='amp',iteraxis='antenna',gridrows=3,gridcols=3,xselfscale=True,yselfscale=True)
# set the name for the output gain caltable
gtable = prefix + '.gcal'
caltable = gtable
# Use our previously determined bandpass
# Note this will automatically be applied to all sources
# not just the one used to determine the bandpass
gaintable = btable
gainfield = ''
# Use nearest (there is only one bandpass entry)
interp = 'nearest'
# Gain calibrators are 1331+305 and 1445+099 (FIELD_ID 0 and 1)
field = '0,1'
# We have only a single spectral window (SPW 0)
# Choose 51 channels 6-56 out of the 63
# to avoid end effects.
# Channel selection is done inside spw
spw = '0:6~56'
# No other selection
selectdata = False
# In this band we do not need a-priori corrections for
# antenna gain-elevation curve or atmospheric opacity
# (at 8GHz and above you would want these)
opacity = 0.0
# scan-based G solutions for both amplitude and phase
gaintype = 'G'
solint = 'inf'
combine = ''
calmode = 'ap'
# minimum SNR allowed
minsnr = 1.0
# reference antenna 15 (15=VLA:N2)
refant = '15'
saveinputs('gaincal',prefix+'.gaincal.saved')
gaincal()
#=====================================================================
#
# Bootstrap flux scale
#
print '--Fluxscale--'
default('fluxscale')
vis = msfile
# set the name for the output rescaled caltable
ftable = prefix + '.fluxscale'
fluxtable = ftable
# point to our first gain cal table
caltable = gtable
# we will be using 1331+305 (the source we did setjy on) as
# our flux standard reference - note its extended name as in
# the FIELD table summary above (it has a VLA seq number appended)
reference = '1331*'
# we want to transfer the flux to our other gain cal source 1445+099
transfer = '1445*'
saveinputs('fluxscale',prefix+'.fluxscale.saved')
fluxscale()
</source>
</source>
-->


The output from {{fluxscale}} follows. A relatively large uncertainty for the phase calibrator is a sign that something went wrong, perhaps bad solutions in {{gaincal}}. Here, the phase calibrator scaled to 2.486 &plusmn; 0.001 Jy, which looks reasonable.
<pre style="background-color:lightgrey;">
Where:
    vis='apcal.gcal'        # the complex gain calibration table
    xaxis='time'            # plot channels across the x axis
    yaxis='amp'              # plot amplitudes across the y axis
    iteraxis='antenna'      # pages the plots by antenna
    coloraxis='corr'        # colorizes the plots by correlation (RR and LL)
    gridrows=3              # places 3 antennas per row
    gridcols=3              # places 3 antennas per column
    xselfscale=True          # create a global xaxis scale for all antennas
    yselfscale=True          # create a global yaxis scale for all antennas
</pre>
 
Don't worry about the shift in amplitude between the flux calibrator and the phase calibrator; this is because we haven't yet transferred the flux scale to the phase calibrator. What we're looking for here is whether there are large variations on the individual calibrators.  
 
Next we use the gain calibration derived above and the known flux of the flux calibrator to transfer the flux scale to the phase calibrator using the fluxscale task.


<pre>
<pre style="background-color: #d8bfd8;">
2018-09-12 22:38:05 INFO fluxscale ##########################################
# Interactive CASA
2018-09-12 22:38:05 INFO fluxscale ##### Begin Task: fluxscale          #####
default fluxscale
2018-09-12 22:38:05 INFO fluxscale fluxscale(vis="ngc5921.demo.ms",caltable="ngc5921.demo.gcal",fluxtable="ngc5921.demo.fluxscale",reference="1331*",transfer="1445*",
inp
2018-09-12 22:38:05 INFO fluxscale         listfile="",append=False,refspwmap=[-1],gainthreshold=-1.0,antenna="",
vis='ngc5921.demo.ms'
2018-09-12 22:38:05 INFO fluxscale         timerange="",scan="",incremental=False,fitorder=1,display=False)
caltable='apcal.gcal'
2018-09-12 22:38:05 INFO fluxscale ****Using NEW VI2-driven calibrater tool****
reference='0'
2018-09-12 22:38:05 INFO fluxscale Opening MS: ngc5921.demo.ms for calibration.
fluxtable='fluxscale.cal'
2018-09-12 22:38:05 INFO fluxscale Initializing nominal selection to the whole MS.
incremental=False
2018-09-12 22:38:05 INFO fluxscale Beginning fluxscale--(MSSelection version)-------
inp
2018-09-12 22:38:05 INFO fluxscale Found reference field(s): 1331+30500002_0
go
2018-09-12 22:38:05 INFO fluxscale Found transfer field(s):  1445+09900002_0
2018-09-12 22:38:05 INFO fluxscale Flux density for 1445+09900002_0 in SpW=0 (freq=1.41342e+09 Hz) is: 2.52609 +/- 0.00218206 (SNR = 1157.67, N = 54)
2018-09-12 22:38:05 INFO fluxscale Storing result in ngc5921.demo.fluxscale
2018-09-12 22:38:05 INFO fluxscale Writing solutions to table: ngc5921.demo.fluxscale
2018-09-12 22:38:06 INFO fluxscale CASA Version 5.3.0-143 
2018-09-12 22:38:06 INFO fluxscale  
2018-09-12 22:38:07 INFO fluxscale ##### End Task: fluxscale            #####
2018-09-12 22:38:07 INFO fluxscale ##########################################
</pre>
</pre>


<!--
<source lang="python">
2011-04-25 19:54:25 INFO fluxscale ##########################################
# Psuedo-interactive CASA
2011-04-25 19:54:25 INFO fluxscale ##### Begin Task: fluxscale          #####
 
2011-04-25 19:54:25 INFO  fluxscale::::casa
fluxscale(vis='ngc5921.demo.ms',caltable='apcal.gcal',reference='0',fluxtable='fluxscale.cal',incremental=False)
2011-04-25 19:54:25 INFO fluxscale Opening MS: ngc5921.demo.ms for calibration.
</source>
2011-04-25 19:54:25 INFO fluxscale Initializing nominal selection to the whole MS.
 
2011-04-25 19:54:26 INFO fluxscale Beginning fluxscale--(MSSelection version)-------
 
2011-04-25 19:54:26 INFO fluxscale Found reference field(s): 1331+30500002_0
<pre style="background-color:lightgrey;">
2011-04-25 19:54:26 INFO fluxscale Found transfer field(s):  1445+09900002_0
Where:
2011-04-25 19:54:26 INFO fluxscale Flux density for 1445+09900002_0 in SpW=0 (freq=1.41342e+09 Hz) is: 2.53882 +/- 0.00218946 (SNR = 1159.57, N = 54)
    vis='ngc5921.demo.ms'      # the measurement set
2011-04-25 19:54:26 INFO fluxscale Storing result in ngc5921.demo.fluxscale
    caltable='apcal.gcal'      # the calibration table with the amplitude and phase corrections
2011-04-25 19:54:26 INFO fluxscale Writing solutions to table: ngc5921.demo.fluxscale
    reference='0'              # the field ID of the reference field (i.e. the flux calibrator)
2011-04-25 19:54:26 INFO  fluxscale::::casa
    fluxtable='fluxscale.cal'  # the name of the output, flux-scaled calibration table
2011-04-25 19:54:26 INFO fluxscale ##### End Task: fluxscale           #####
    incremental=False          # create a single fluxscale table with all the gain calibration
2011-04-25 19:54:26 INFO fluxscale ##########################################
                              # ('False' is the default; if you use 'True' you need to supply
                              # both the apcal.gcal and fluxscale.cal tables to applycal below)
</pre>
</pre>
-->


=== Inspect the Calibration Solutions ===
The output from [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.fluxscale.html fluxscale] follows. A relatively large uncertainty for the phase calibrator is a sign that something went wrong, such as having bad solutions in [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.gaincal.html gaincal]. Here, the phase calibrator scaled to 2.521 &plusmn; 0.002 Jy, which looks reasonable.


[[File:ngc5921-gaincal.png|thumb|Gain calibration solutions from {{gaincal}} and {{fluxscale}}.]]
<pre style="background-color: #fffacd;">
2023-01-17 22:47:15 INFO fluxscale ##########################################
2023-01-17 22:47:15 INFO fluxscale ##### Begin Task: fluxscale          #####
2023-01-17 22:47:15 INFO fluxscale fluxscale( vis='ngc5921.demo.ms', caltable='apcal.gcal', fluxtable='fluxscale.cal', reference=['0'], transfer=[], listfile='', append=False, refspwmap=[-1], gainthreshold=-1.0, antenna='', timerange='', scan='', incremental=False, fitorder=1, display=False )
2023-01-17 22:47:15 INFO fluxscale ****Using NEW VI2-driven calibrater tool****
2023-01-17 22:47:15 INFO fluxscale Opening MS: ngc5921.demo.ms for calibration.
2023-01-17 22:47:15 INFO fluxscale Initializing nominal selection to the whole MS.
2023-01-17 22:47:15 INFO fluxscale Beginning fluxscale--(MSSelection version)-------
2023-01-17 22:47:16 INFO fluxscale Assuming all non-reference fields are transfer fields.
2023-01-17 22:47:16 INFO fluxscale Found reference field(s): 1331+30500002_0
2023-01-17 22:47:16 INFO fluxscale Found transfer field(s):  1445+09900002_0
2023-01-17 22:47:16 INFO fluxscale Flux density for 1445+09900002_0 in SpW=0 (freq=1.41342e+09 Hz) is: 2.52141 +/- 0.00223811 (SNR = 1126.58, N = 54)
2023-01-17 22:47:16 INFO fluxscale Storing result in fluxscale.cal
2023-01-17 22:47:16 INFO fluxscale Writing solutions to table: fluxscale.cal
2023-01-17 22:47:16 INFO fluxscale Task fluxscale complete. Start time: 2023-01-17 15:47:15.041544 End time: 2023-01-17 15:47:16.120049
2023-01-17 22:47:16 INFO fluxscale ##### End Task: fluxscale            #####
2023-01-17 22:47:16 INFO fluxscale ##########################################
</pre>


Now inspect the results of {{gaincal}}. The setup is identical to that used to plot the [[#Inspect the Bandpass Response Curve | bandpass response curve]]. The only change is that we are plotting the gaintable ngc5921.demo.gcal, and we're looking at solutions for both of the calibrator sources. The results are shown at right.
Now we can look at the amplitudes again, using the transferred flux scale which should eliminate the differences between the calibrators. This is identical to the previous inspection, but using fluxscale.cal rather than apcal.gcal (so could be run in interactive CASA by retrieving the previous inputs with "tget plotms" then just changing the input table using "vis='fluxscale.cal'").
 
<pre style="background-color: #d8bfd8;">
# Interactive CASA
default plotms
inp
vis='fluxscale.cal'
xaxis='time'
yaxis='amp'
iteraxis='antenna'
coloraxis='corr'
gridrows=3
gridcols=3
xselfscale=True
yselfscale=True
inp
go
</pre>


<source lang="python">
<source lang="python">
# Set up 2x1 panels - upper panel amp vs. time
# Psuedo-interactive CASA
plotms(vis='ngc5921.demo.fluxscale', field='0,1', gridrows=2, gridcols=1, plotindex=0, rowindex=0, yaxis='amp', showgui=True, clearplots=False, coloraxis='antenna1')
 
plotms(vis='fluxscale.cal',xaxis='time',yaxis='amp',iteraxis='antenna',gridrows=3,gridcols=3,xselfscale=True,yselfscale=True)
</source>
</source>
<pre style="background-color:lightgrey;">
Where:
    vis='fluxscale.cal'      # the complex gain calibration table with the flux scale applied
    xaxis='time'            # plot channels across the x axis
    yaxis='amp'              # plot amplitudes across the y axis
    iteraxis='antenna'      # pages the plots by antenna
    coloraxis='corr'        # colorizes the plots by correlation (RR and LL)
    gridrows=3              # places 3 antennas per row
    gridcols=3              # places 3 antennas per column
    xselfscale=True          # create a global xaxis scale for all antennas
    yselfscale=True          # create a global yaxis scale for all antennas
</pre>
=== Apply the solutions ===
Next, we apply the calibration solutions to the calibrators themselves, and finally transfer the calibration solutions by interpolation (or nearest-neighbor sampling) to the source. The relevant task is [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.calibration.applycal.html applycal], which fills out a new column (CORRECTED_DATA) of calibrated data in the measurement set without replacing the raw data column (DATA). The application is identical to that used for [[Calibrating a VLA 5 GHz continuum survey|continuum data]], except that the bandpass table is also included in the calibration. In order to apply multiple calibrations at once, we provide the '''gaintable''' parameter with a list of calibration tables rather than a single entry. If we had run fluxscale with "incremental=True", we would also include the apcal.gcal table here.
First, apply the tables to the flux calibrator:
<pre style="background-color: #d8bfd8;">
# Interactive CASA
default applycal
inp
vis='ngc5921.demo.ms'
field='0'
gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal']
gainfield=['','0','0']
calwt=False
flagbackup=True
inp
go
</pre>


<source lang="python">
<source lang="python">
# Set up 2x1 panels - lower panel phase vs. time
# Psuedo-interactive CASA
plotms(vis='ngc5921.demo.fluxscale', field='0,1', gridrows=2, gridcols=1, plotindex=1, rowindex=1, yaxis='phase', showgui=True, clearplots=False, coloraxis='antenna1')
# for the flux/bandpass calibrator (field '0')
applycal(vis='ngc5921.demo.ms', field='0',  
        gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal'],  
        gainfield=['','0','0'],  
        calwt=False, flagbackup=True)
</source>
</source>


The amp and phase coherence looks good. If you want to do this interactively and iterate over antenna, set iteraxis = 'antenna'.
<pre style="background-color:lightgrey;">
Where:
    vis='ngc5921.demo.ms'    # the measurement set
    field='0'                # field id(s) to work on - 0 = the flux calibrator
    gaintable=['antgain.cal''bandpass.cal','fluxscale.cal'] # gain calibration table(s) to apply
    gainfield=['','0','0']    # field id(s) from which each respective gaintable was derived 
    calwt=False              # determines if the weights are calibrated along with the data
    flagbackup=True          # automatically back up the state of flags before the run
</pre>


<!--
Within the gainfield parameter, we do not specify a field for the ''antgain.cal'' table since this was derived independently from the calibrator fields. For the calibrators, all bandpass solutions are the same as for the flux/bandpass calibrator (id=0), and the phase and amplitude calibration as derived from their own visibility data. So when applying corrections to any of our sources, the respective field for ''bandpass.cal'' will be our bandpass calibrator (field='0'), but the field for ''fluxscale.cal'' will be '1' for both the phase calibrator itself and the target field.
default('plotcal')
caltable = ftable
field = '0,1'
# Set up 2x1 panels - upper panel amp vs. time
subplot = 211
yaxis = 'amp'
# No output file yet (wait to plot next panel)
saveinputs('plotcal',prefix+'.plotcal.gscaled.amp.saved')
showgui = True
plotcal()
#
# Set up 2x1 panels - lower panel phase vs. time
subplot = 212
yaxis = 'phase'
saveinputs('plotcal',prefix+'.plotcal.gscaled.phase.saved')
#
# The amp and phase coherence looks good
# Pause script if you are running in scriptmode
# If you want to do this interactively and iterate over antenna, set
#iteration = 'antenna'
plotcal()
-->


Next, apply the tables to the phase calibrator:


=== Apply the Solutions ===
<pre style="background-color: #d8bfd8;">
# Interactive CASA
default applycal
inp
vis='ngc5921.demo.ms'
field='1'
gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal']
gainfield=['','0','1']
calwt=False
flagbackup=True
inp
go
</pre>


Next, apply the calibration solutions to the calibrators themselves, and finally transfer the calibration solutions by interpolation (or nearest-neighbor sampling) to the source. The relevant task is {{applycal}}, which fills out a new column (CORRECTED_DATA) of calibrated data in the measurement set without wiping out the raw data column. The application is identical to that used for [[Calibrating a VLA 5 GHz continuum survey|continuum data]], except that the bandpass table is also included in the calibration. To apply multiple calibrations at once, provide the '''gaintable''' parameter with a list of calibration tables, as follows.
(Note: the only changes from the application to the flux calibrator are the field to apply the calibration to and the gainfield for the fluxscale.cal table, both changed to refer to the phase calibrator.)


<source lang="python">
<source lang="python">
gaintable = ['ngc5921.demo.fluxscale', 'ngc5921.demo.bcal']
# Psuedo-interactive CASA
# for the phase calibrator (field '1')
applycal(vis='ngc5921.demo.ms', field='1',
        gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal'],
        gainfield=['','0','1'],
        calwt=False, flagbackup=True)
</source>
</source>


We want to correct the calibrators using themselves and transfer from 1445+099 to itself and the target N5921. Start with the fluxscale/gain and bandpass tables. We will pick the 1445+099 out of the gain table for transfer and use all of the bandpass table. Also, note that the table .fluxscale has the .gcal solutions with the correct flux scale applied, and so there is no need to invoke the .gcal again in the applycal() command below.
<pre style="background-color:lightgrey;">
Where:
    vis='ngc5921.demo.ms'    # the measurement set
    field='1'                # field id(s) to work on - 1 = the flux calibrator
    gaintable=['antgain.cal''bandpass.cal','fluxscale.cal'] # gain calibration table(s) to apply
    gainfield=['','0','1']    # field id(s) from which each respective gaintable was derived 
    calwt=False              # determines if the weights are calibrated along with the data
    flagbackup=True          # automatically back up the state of flags before the run
</pre>


<source lang="python">
Finally, apply the tables to the science target:
applycal(vis='ngc5921.demo.ms', field='1,2', gaintable=['ngc5921.demo.fluxscale','ngc5921.demo.bcal'], gainfield=['1','*'],  
 
        interp=['linear','nearest'], spwmap=[], selectdata=False)
<pre style="background-color: #d8bfd8;">
</source>
# Interactive CASA
default applycal
inp
vis='ngc5921.demo.ms'
field='2'
gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal']
gainfield=['','0','1']
calwt=False
flagbackup=True
inp
go
</pre>


Now for completeness apply 1331+305 to itself.  
(Note: the only change from the phase calibrator is the field to apply the calibration to – the gain fields are all the same.)


<source lang="python">
<source lang="python">
applycal(vis='ngc5921.demo.ms', field='0', gaintable=['ngc5921.demo.fluxscale','ngc5921.demo.bcal'], gainfield=['0','*'],  
# Psuedo-interactive CASA
         interp=['linear','nearest'], spwmap=[], selectdata=False)
# for the science target (field '2')
applycal(vis='ngc5921.demo.ms', field='2',  
        gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal'],  
        gainfield=['','0','1'],  
         calwt=False, flagbackup=True)
</source>
</source>


<!---
<pre style="background-color:lightgrey;">
In the script snippet below, the python global variables ''ftable'' and ''btable'' replace the full table names.
Where:
    vis='ngc5921.demo.ms'    # the measurement set
    field='2'                # field id(s) to work on - 2 = the science target
    gaintable=['antgain.cal''bandpass.cal','fluxscale.cal'] # gain calibration table(s) to apply
    gainfield=['','0','1']    # field id(s) from which each respective gaintable was derived 
    calwt=False              # determines if the weights are calibrated along with the data
    flagbackup=True          # automatically back up the state of flags before the run
</pre>


default('applycal')
== Plot the spectrum ==
vis = msfile
# We want to correct the calibrators using themselves
# and transfer from 1445+099 to itself and the target N5921
# Start with the fluxscale/gain and bandpass tables
gaintable = [ftable,btable]
# pick the 1445+099 out of the gain table for transfer
# use all of the bandpass table
gainfield = ['1','*']
# interpolation using linear for gain, nearest for bandpass
interp = ['linear','nearest']
# only one spw, do not need mapping
spwmap = []
# all channels
spw = ''
selectdata = False
# as before
opacity = 0.0
# select the fields for 1445+099 and N5921
field = '1,2'
applycal()
# Now for completeness apply 1331+305 to itself
field = '0'
gainfield = ['0','*']
# The CORRECTED_DATA column now contains the calibrated visibilities
saveinputs('applycal',prefix+'.applycal.saved')
applycal()


-->
[[File:spectrum_plot_colors_6.5.2.png|thumb|Integrated spectrum from the calibrated visibilities plotted with the two polarizations shown in different colors. This shows which channels contain an HI signal and which are good to use for continuum subtraction. Click to enlarge]]


== Plot the Spectrum ==
Before we attempt to image the 21 cm cube of the source, we need to subtract off the underlying continuum, which means we need to plot the integrated spectrum of the source to determine the line-free channels where we can fit the continuum.


[[File:spectrum-plotting.png|thumb|{{plotms|Plotms}} settings to produce the integrated spectrum from the calibrated visibilities data.]]
We can do this in [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casaplotms.plotms.html plotms].


Before we attempt to image the 21 cm cube of the source, we need to subtract off the underlying continuum, which means we need to plot the integrated spectrum of the source to determine the continuum channels.
<pre style="background-color: #d8bfd8;">
 
# Interactive CASA
We can do this in {{plotms}}.
default plotms
inp
vis='ngc5921.demo.ms'
field='2'
spw='0:6~56'
averagedata=True
avgtime='3600'
avgscan=True
avgbaseline=True
xaxis='channel'
yaxis='amp'
coloraxis='corr'
ydatacolumn='corrected'
inp
go
</pre>


<source lang="python">
<source lang="python">
plotms(vis='ngc5921.demo.ms', selectdata=True, field='N5921*', spw='0:6~56', averagedata=True, avgtime='3600', avgscan=True,  
# Psuedo-interactive CASA
      avgbaseline=True, xaxis='channel', yaxis='amp', ydatacolumn='corrected')
plotms(vis='ngc5921.demo.ms', field='2', spw='0:6~56', averagedata=True, avgtime='3600', avgscan=True, avgbaseline=True, xaxis='channel', yaxis='amp', ydatacolumn='corrected')
</source>
</source>


Note that we have entered all the relevent parameters via the task interface, as an alternative to entering each option into the GUI. If the symbols appear too small,  the size may be increased via the Display tab: change the Unflagged Points Symbol to 'Custom' and increase the number of pixels for the plotting symbol.  The resulting plot is illustrated in the figure at right. Briefly, we want to average both in time and over baselines to get the signal-to-noise necessary to reveal the 21 cm profile (see [[Averaging data in plotms]] for more details on averaging options). If you wish to enter the values directly into the GUI, you can follow the (Tab)'''Command''' convention of the [[Data flagging with casaplotms|flagging tutorial]] with the following settings :
<pre style="background-color:lightgrey;">
Where:
    vis='ngc5921.demo.ms'        # the measurement set
    field='2'                    # select the science target
    averagedata=True              # average the data (enables data-averaging options)
    avgtime='3600'                # average over 3600s (i.e. the whole dataset)
    avgscan=True                  # average across scan boundaries
    avgbaseline=True              # average baselines
    xaxis='channel'              # plot channels across the x axis
    yaxis='amp'                  # plot amplitudes across the y axis
    coloraxis='corr'              # colorizes the plots by correlation (RR and LL)
    ydatacolumn='corrected'       # use the CORRECTED_DATA column (with the calibration applied)
</pre>
 
The resulting plot is illustrated in the figure at right. Briefly, we want to average both in time and over baselines to get the signal-to-noise necessary to reveal the 21 cm profile (see [[Averaging data in plotms]] for more details on averaging options). If the symbols appear too small, the size may be increased via the Display tab on the GUI: change the Unflagged Points Symbol to 'Custom', change the plotting symbol to 'circle', 'square' or 'diamond', and increase the number of pixels for the plotting symbol.
 
Note that we have entered all the relevent parameters via the command line interface rather than selecting options in the GUI. If you wish to enter the values directly into the GUI, you can follow the (Tab)'''Command''' convention of the [[Data flagging with casaplotms|flagging tutorial]] with the following settings :
* (Data)'''field''' = N5921*
* (Data)'''field''' = N5921*
* (Data)'''spw''' = 0:6~56
* (Data)'''Averaging &rarr; Time''' = 3600 (average over some long time window)
* (Data)'''Averaging &rarr; Time''' = 3600 (average over some long time window)
* (Data)'''Averaging &rarr; Scan''' = True (checkmark; average in time across scan boundaries)
* (Data)'''Averaging &rarr; Scan''' = True (checkmark; average in time across scan boundaries)
Line 991: Line 1,113:
* (Axes)'''X Axis''' = Channel
* (Axes)'''X Axis''' = Channel
* (Axes)'''Y Axis''' = Amp
* (Axes)'''Y Axis''' = Amp
* (Display)'''Colorize''' = Corr


Now remove 0:6~56 from the spw field to see all channels. From inspection of this plot, it looks like channels 4~6 and 50~59 contain line-free channels, suitable to use for continuum subtraction.
From inspection of this plot, it looks like channels 4~8 and 50~59 contain line-free channels, suitable to use for continuum subtraction.


== Continuum Subtraction ==
== Continuum subtraction ==


The next step is to split off the NGC 5921 data from the multisource measurement set and subtract the continuum. Splitting uses the {{split}} command, as follows.
The next step is to split off the NGC 5921 data from the multisource measurement set and subtract the continuum. Splitting uses the [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.manipulation.split.html split] command, as follows.
 
<pre style="background-color: #d8bfd8;">
# Interactive CASA
default split
inp
vis='ngc5921.demo.ms'
field='2'
outputvis='ngc5921.demo.split.ms'
spw=''
datacolumn='corrected'
inp
go
</pre>


<source lang="python">
<source lang="python">
split(vis='ngc5921.demo.ms', outputvis='ngc5921.demo.src.split.ms', field='N5921*', spw='', datacolumn='corrected')
# Psuedo-interactive CASA
plotms(vis='ngc5921.demo.ms', outputvis='ngc5921.demo.split.ms', field='2', spw='', datacolumn='corrected')
</source>
</source>


<!--
<pre style="background-color:lightgrey;">
default('split')
Where:
vis = msfile
    vis='ngc5921.demo.ms'            # the input measurement set
splitms = prefix + '.src.split.ms'
    outputvis='ngc5921.demo.split.ms # the output split measurement set
outputvis = splitms
    field='2'                       # select the science target
field = 'N5921*'
    spw=''                           # select the entire spectral window
spw = ''
    datacolumn='corrected'           # use the CORRECTED_DATA column (with the calibration applied)
datacolumn = 'corrected'
</pre>
saveinputs('split',prefix+'.split.n5921.saved')
split()
print "Created "+splitms
-->


This action generated a new measurement set called ''ngc5921.demo.src.split.ms'' and copied the ''calibrated'' source data (datacolumn = 'corrected') into it.
This creates a new measurement set called ''ngc5921.demo.split.ms'' and copies the ''calibrated'' source data (datacolumn = 'corrected') from the CORRECTED_DATA column into it, writing it to the DATA column in the output measurement set.


{{uvcontsub|Uvcontsub}} subtracts the continuum from the data in the visibility (''u'', ''v'') plane. We will be using channels 4-6 and 50-59 for continuum.
We can now subtract the continuum from this split dataset in the visibility (''uv'') plane using [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.manipulation.uvcontsub.html uvcontsub]. As we determined above, we can use channels 4~8 and 50~59 for this. Note that the uvcontsub task was substantially revised in CASA 6.5 and now has new parameter inputs that are not backwards compatible with inputs based on older CASAguides.
 
<pre style="background-color: #d8bfd8;">
# Interactive CASA
default uvcontsub
ins
vis='ngc5921.demo.split.ms'
outputvis='ngc5921.demo.uvcontsub.ms'
fitspec='0:4~8;50~59'
fitorder=0
inp
go
</pre>


<source lang="python">
<source lang="python">
uvcontsub(vis='ngc5921.demo.src.split.ms', field='N5921*', fitspw='0:4~6;50~59', spw='0', solint=0.0, fitorder=0, want_cont=True)
# Psuedo-interactive CASA
plotms(vis='ngc5921.demo.ms', outputvis='ngc5921.demo.split.ms', fitspec='0:4~8;50~59', fitorder=0)
</source>
</source>


<!--
<pre style="background-color:lightgrey;">
default('uvcontsub')
Where:
vis = splitms
    vis='ngc5921.demo.split ms'          # the input split measurement set
field = 'N5921*'
    outputvis='ngc5921.demo.uvcontsub.ms # the output continuum-subtracted measurement set
# Use channels 4-6 and 50-59 for continuum
    fitspec='0:4~8;50~59'               # select the channels over which to fit the continuum
fitspw='0:4~6;50~59'
    fitorder=0                           # fit with polynomial order 0 (constant)
# Output all of spw 0
</pre>
spw = '0'
# Averaging time (none)
solint = 0.0
# Fit only a mean level
fitorder = 0
# Do the uv-plane subtraction
fitmode = 'subtract'
# Let it split out the data automatically for us
splitdata = True
saveinputs('uvcontsub',prefix+'.uvcontsub.saved')
uvcontsub()
</source>
-->
 
Notice that {{uvcontsub}} splits the data into two new measurement sets, 'ngc5921.demo.ms.cont', which contains an average of the continuum channels, and 'ngc5921.demo.ms.contsub', which contains the continuum-subtracted spectral line data.
 


(Note: this could be run directly on the original measurement set by specifying vis='ngc5921.demo.ms', field='2', and datacolumn='corrected' to select the science target and the
calibrated data column – in a change from its earlier behavior, datacolumn='data' is the default rather than the fallback for uvcontsub, so this must be specified explicitly if not using split data)


The fitspec parameter, if given as a simple string as done here, specifies the spw to be used for the fitting, with the fit order given using fitorder. However, fitspect can be used in more complex ways by specifying it as a python dictionary. For details, see the uvcontsub documentation.


The polynomial fit order specified is used to fit the real and imaginary components separately, so the fitted model amplitude is the quadrature combination of these two fits and is thus not, in general, a polynomial.


== Imaging ==
== Imaging ==


[[File:spectrum-uvplot.png|thumb|Plot of amplitude vs. projected baseline length (in units of the observing wavelength) produced by casaplotms. The maximum baseline is just below 5 kilo-lambda.]]
[[File:spectrum-uvplot.png|thumb|Plot of amplitude vs projected baseline length (in units of the observing wavelength) produced by plotms. The maximum baseline is just below 5 k&lambda;. Click to enlarge.]]


Now we can generate the primary science product, a {{tclean}} data cube (ra, dec, velocity) from the continuum-subtracted (''u'', ''v'', channel) measurement set, ''ngc5921.demo.ms.contsub''. Things to consider in using {{tclean}}:
Now we can use [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.imaging.tclean.html tclean] to generate the primary science product, a cleaned data cube (ra, dec, velocity) from the continuum-subtracted (''u'', ''v'', channel) measurement set, ''ngc5921.demo.uvcontsub.ms''. Things to consider in using tclean:
* To ensure channels aren't averaged prior to imaging, choose '''mode='channel''''.
* To ensure channels aren't averaged prior to imaging and proper Doppler combination, choose '''specmode='cube''''.
* Specify the channels to image using '''start = 5''', '''width = 1''' (no averaging over channels), '''nchan = 46'''; only channels 5~51 will be imaged.
* The maximum baseline is just under 5 k&lambda; (see the figure at right, showing this plotted with plotms), and so the expected synthetic beam is roughly 1.22 &times; 206265 / 5000 = 50 arcseconds (subject to the details of ''u'', ''v'' weighting), as expected for D configuration. Pixels should sample the beam better than 3 times, so 15 arcseconds is a good choice of pixel size ('''cell = ['15.0arcsec','15.0arcsec']''').
* The maximum baseline is just under 5 kilolambda (see the figure at right), and so the expected synthetic beam is roughly 1.22 &times; 206265 / 5000 = 50 arcseconds (subject to the details of ''u'', ''v'' weighting). Pixels should sample the beam better than 3 times, so 15 arcseconds is a good choice of pixel size ('''cell = ['15.0arcsec','15.0arcsec']''').
* We only want to clean down to the noise, which can be determined by examining line-free channels in an image made without cleaning (a 'dirty' image), as detailed below.  
* We only want to {{tclean}} down to the noise, which is easily determined by trial-and-error imaging of a single channel (choosing '''nchan=1''' and '''start''' appropriately). Here, {{tclean}} stops when the maximum residual on the channel is below '''threshold='8.0mJy''''.  


<!--
[[file:CARTA_dirty_cube_6.5.2.png|thumb|A channel near the center of the source in the dirty cube in CARTA, compare to the same channel in the tcleaned cube [[#The integrated spectrum|below]]. Click to enlarge.]]
<source lang="python">
# Image the continuum subtracted measurement set
clean(vis='ngc5921.demo.src.split.ms.contsub', imagename='ngc5921.demo.clean', field='0', mode='channel', nchan=46, start=5, width=1, spw='', gain=0.1, imsize=[256,256], psfmode='clark', imagermode='', cell=['15.0arcsec','15.0arcsec'], niter=6000, threshold='8.0mJy', weighting='briggs', robust=0.5, mask = [108,108,148,148], interactive=False)
</source>
-->


<!-- As of CASA 5.3, the preferred and recommended deconvolution task is {{tclean}}(). The {{tclean}}() execution equivalent to the above {{clean}}() one is following: -->
To create a dirty image:


<source lang="python">
<pre style="background-color: #d8bfd8;">
# Image the continuum subtracted measurement set
# Interactive CASA
tclean(vis='ngc5921.demo.src.split.ms.contsub', imagename='ngc5921.demo.tclean', field='0', datacolumn='data', specmode='cube', nchan=46, start=5, width=1, spw='', deconvolver='hogbom', gridder='standard', niter=6000, gain=0.1, threshold='8.0mJy', imsize=[256,256], cell=['15.0arcsec','15.0arcsec'], weighting='briggs', robust=0.5,  mask = 'box[[108pix,108pix],[148pix,148pix]]', interactive=False, pblimit=-0.2)
default tclean
</source>
inp
 
vis='ngc5921.demo.uvcontsub.ms'
<!--
specmode=cube
Execute only one, either {{tclean}}() or {{clean}}().
inp                              #Run inp again, as setting specmode=cube opens new options
-->
cell=['15.0arcsec','15.0arcsec']
 
outframe='bary'
<!--
niter = 0
srcsplitms = splitms + '.contsub'
imagename='ngc5921.demo.dirty'
#=====================================================================
datacolumn='data'
#
imsize=[256,256]
# Now clean an image cube of N5921
pblimit=-0.2
#
weighting='briggs'
default('clean')
robust=0.5
# Pick up our split source continuum-subtracted data
inp
vis = srcsplitms
go
# Make an image root file name
</pre>
imname = prefix + '.cleanimg'
imagename = imname
# Set up the output image cube
mode = 'channel'
nchan = 46
start = 5
width = 1
# This is a single-source MS with one spw
field = '0'
spw = ''
# Standard gain factor 0.1
gain = 0.1
# Set the output image size and cell size (arcsec)
imsize = [256,256]
# Do a simple Clark clean
psfmode = 'clark'
# No Cotton-Schwab iterations
csclean = False
# Pixel size 15 arcsec for this data (1/3 of 45" beam)
# VLA D-config L-band
cell = ['15.0arcsec','15.0arcsec']
# Fix maximum number of iterations
niter = 6000
# Also set flux residual threshold (in mJy)
threshold='8.0mJy'
# Set up the weighting
# Use Briggs weighting (a moderate value, on the uniform side)
weighting = 'briggs'
robust = 0.5
# Set a cleanbox +/-20 pixels around the center 128,128
mask = [108,108,148,148]
# If you want interactive clean set to True
#interactive=True
interactive=False
saveinputs('clean',prefix+'.clean.saved')
clean()
-->
 
Use {{imhead}} to look at the cube header:


<source lang="python">
<source lang="python">
imhead(imagename='ngc5921.demo.tclean.image', mode='summary')
# Pseudo-interactive CASA
tclean(vis='ngc5921.demo.uvcontsub.ms', imagename='ngc5921.demo.dirty', specmode='cube', niter=0, imsize=[256,256], cell=['15.0arcsec','15.0arcsec'], outframe='baby', weighting='briggs', robust=0.5, interactive=False, pblimit=-0.2)
</source>
</source>


<!--
<pre style="background-color:lightgrey;">
clnimage = imname+'.image' # store the clean image in a python global for future use
Where:
default('imhead')
vis='ngc5921.demo.uvcontsub.ms'. # the input measurement set
imagename = clnimage
specmode=cube                    # sets the spectral mode to properly handle line data
mode = 'summary'
cell=['15.0arcsec','15.0arcsec'] # sets the cell (pixel) size
imhead()
outframe='bary'                 # sets the velocity frame to the extragalactic standard of barycentric
-->
niter = 0                        # sets the number of clean cycles to 0 (i.e. no cleaning)
imagename='ngc5921.demo.dirty'  # the output image name
datacolumn='data'               # tells tclean to use the DATA column
imsize=[256,256]                # sets the image size (in pixels)
pblimit=-0.2                    # negative value to not blank pixels beyond a primary beam gain of 20%
weighting='briggs'              # use Briggs weighting...
robust=0.5                      # ...with a robust value of 0.5
</pre>


The output, as follows, appears in the logger window.
The output ''ngc5921.demo.dirty.image'' file (note that .image gets appended – other outputs such as the .psf, .pb, etc. are also created by tclean) can then be viewed using [https://cartavis.org CARTA]. By defining a rectangular region that takes in the whole image plane and setting the Z profile to 'RMS', it is possible to see how the RMS level varies by channel. You can see how the noise falls from the edge of the bandpass to around 1.75 mJy by channel 6, then rises again from channel 9 when the source starts to contribute, then falls back to 1.75 mJy again by channel 50, rising again from channel 56. This also confirms our earlier choices of which channels looked line-free and which channels were in the best signal-to-noise section of the cube. If we thus want to clean to 4 sigma, we can set '''threshold='7.0mJy''''.


<!--
The dirty image can also be used to determine the region to be cleaned by tclean. This is most easily done by defining a region that encloses the area where flux is visible on the dirty image (which can be checked by stepping through the channels) and then exporting this region as a CRTF file, here ''cleanbox.crtf'', that can be read by CASA.
 
<pre>
2018-09-13 00:26:03 INFO imhead ##########################################
2018-09-13 00:26:03 INFO imhead ##### Begin Task: imhead            #####
2018-09-13 00:26:03 INFO imhead imhead(imagename="ngc5921.demo.clean.image",mode="summary",hdkey="",hdvalue="",verbose=False)
2018-09-13 00:26:03 INFO ImageMetaData  
2018-09-13 00:26:03 INFO ImageMetaData Image name      : ngc5921.demo.clean.image
2018-09-13 00:26:03 INFO ImageMetaData Object name      : N5921_2
2018-09-13 00:26:03 INFO ImageMetaData Image type      : PagedImage
2018-09-13 00:26:03 INFO ImageMetaData Image quantity  : Intensity
2018-09-13 00:26:03 INFO ImageMetaData Pixel mask(s)   : None
2018-09-13 00:26:03 INFO ImageMetaData Region(s)        : None
2018-09-13 00:26:03 INFO ImageMetaData Image units      : Jy/beam
2018-09-13 00:26:03 INFO ImageMetaData Restoring Beam  : 51.5763 arcsec, 47.3275 arcsec, 8.41586 deg
2018-09-13 00:26:03 INFO ImageMetaData  
2018-09-13 00:26:03 INFO ImageMetaData Direction reference : J2000
2018-09-13 00:26:03 INFO ImageMetaData Spectral  reference : LSRK
2018-09-13 00:26:03 INFO ImageMetaData Velocity  type      : RADIO
2018-09-13 00:26:03 INFO ImageMetaData Rest frequency      : 1.42041e+09 Hz
2018-09-13 00:26:03 INFO ImageMetaData Pointing center    :  15:22:00.000000  +05.04.00.000000
2018-09-13 00:26:03 INFO ImageMetaData Telescope          : VLA
2018-09-13 00:26:03 INFO ImageMetaData Observer            : TEST
2018-09-13 00:26:03 INFO ImageMetaData Date observation    : 1995/04/13/09:33:00
2018-09-13 00:26:03 INFO ImageMetaData Telescope position: [-1.60119e+06m, -5.04198e+06m, 3.55488e+06m] (ITRF)
2018-09-13 00:26:03 INFO ImageMetaData  
2018-09-13 00:26:03 INFO ImageMetaData Axis Coord Type      Name            Proj Shape Tile  Coord value at pixel    Coord incr Units
2018-09-13 00:26:03 INFO ImageMetaData ------------------------------------------------------------------------------------------------
2018-09-13 00:26:03 INFO ImageMetaData 0    0    Direction Right Ascension  SIN  256  64  15:22:00.000  128.00 -1.500000e+01 arcsec
2018-09-13 00:26:03 INFO ImageMetaData 1    0    Direction Declination      SIN  256  64 +05.04.00.000  128.00  1.500000e+01 arcsec
2018-09-13 00:26:03 INFO ImageMetaData 2    1    Stokes    Stokes                    1    1            I
2018-09-13 00:26:03 INFO ImageMetaData 3    2    Spectral  Frequency                46    8  1.41279e+09    0.00 2.4414062e+04 Hz
2018-09-13 00:26:03 INFO ImageMetaData                     Velocity                              1607.99    0.00 -5.152860e+00 km/s
2018-09-13 00:26:03 INFO imhead ##### End Task: imhead              #####
2018-09-13 00:26:03 INFO imhead ##########################################
</pre>
-->


We are now ready to run tclean again and create the clean cube.


<pre>
<pre style="background-color: #d8bfd8;">
2019-09-03 22:25:25 INFO imhead ##### Begin Task: imhead            #####
# Interactive CASA
2019-09-03 22:25:25 INFO imhead imhead(imagename="ngc5921.demo.tclean.image",mode="summary",hdkey="",hdvalue="",verbose=False)
default tclean
2019-09-03 22:25:25 INFO ImageMetaData  
inp
2019-09-03 22:25:25 INFO ImageMetaData Image name      : ngc5921.demo.tclean.image
vis='ngc5921.demo.uvcontsub.ms'
2019-09-03 22:25:25 INFO ImageMetaData Object name      : N5921_2
specmode=cube
2019-09-03 22:25:25 INFO ImageMetaData Image type      : PagedImage
cell=['15.0arcsec','15.0arcsec']
2019-09-03 22:25:25 INFO ImageMetaData Image quantity  : Intensity
outframe='bary'
2019-09-03 22:25:25 INFO ImageMetaData Pixel mask(s)    : None
datacolumn='data'
2019-09-03 22:25:25 INFO ImageMetaData Region(s)        : None
imsize=[256,256]
2019-09-03 22:25:25 INFO ImageMetaData Image units      : Jy/beam
pblimit=-0.2
2019-09-03 22:25:25 INFO ImageMetaData Restoring Beams
weighting='briggs'
2019-09-03 22:25:25 INFO ImageMetaData Pol  Type Chan        Freq    Vel
robust=0.5
2019-09-03 22:25:25 INFO ImageMetaData   I    Max    7 1.41296e+09 1571.92  51.6639 arcsec x  47.3594 arcsec pa= 8.3205 deg
imagename='ngc5921.demo.clean'
2019-09-03 22:25:25 INFO ImageMetaData   I    Min  43 1.41384e+09 1386.42  51.5897 arcsec x  47.3127 arcsec pa= 8.3869 deg
niter=6000
2019-09-03 22:25:25 INFO ImageMetaData   I Median  13 1.41310e+09 1541.00  51.6611 arcsec x  47.3318 arcsec pa=  8.1425 deg
mask='cleanbox.crtf'
2019-09-03 22:25:25 INFO ImageMetaData  
threshold='7.0mJy'
2019-09-03 22:25:25 INFO ImageMetaData Direction reference : J2000
inp
2019-09-03 22:25:25 INFO ImageMetaData Spectral  reference : LSRK
go
2019-09-03 22:25:25 INFO ImageMetaData Velocity  type      : RADIO
2019-09-03 22:25:25 INFO ImageMetaData Rest frequency      : 1.42041e+09 Hz
2019-09-03 22:25:25 INFO ImageMetaData Pointing center    :  15:22:00.000000  +05.04.00.000000
2019-09-03 22:25:25 INFO ImageMetaData Telescope          : VLA
2019-09-03 22:25:25 INFO ImageMetaData Observer            : TEST
2019-09-03 22:25:25 INFO ImageMetaData Date observation    : 1995/04/13/09:33:00
2019-09-03 22:25:25 INFO ImageMetaData Telescope position: [-1.60119e+06m, -5.04198e+06m, 3.55488e+06m] (ITRF)
2019-09-03 22:25:25 INFO ImageMetaData  
2019-09-03 22:25:25 INFO ImageMetaData Axis Coord Type      Name            Proj Shape Tile  Coord value at pixel    Coord incr Units
2019-09-03 22:25:25 INFO ImageMetaData ------------------------------------------------------------------------------------------------
2019-09-03 22:25:25 INFO ImageMetaData 0    0    Direction Right Ascension  SIN  256  64  15:22:00.000  128.00 -1.500000e+01 arcsec
2019-09-03 22:25:25 INFO ImageMetaData 1    0    Direction Declination      SIN  256  64 +05.04.00.000  128.00  1.500000e+01 arcsec
2019-09-03 22:25:25 INFO ImageMetaData 2    1    Stokes    Stokes                    1    1            I
2019-09-03 22:25:25 INFO ImageMetaData 3    2    Spectral  Frequency                46    8  1.41279e+09    0.00 2.4414062e+04 Hz
2019-09-03 22:25:25 INFO ImageMetaData                     Velocity                              1607.99    0.00 -5.152860e+00 km/s
2019-09-03 22:25:25 INFO imhead ##### End Task: imhead              #####
2019-09-03 22:25:25 INFO imhead ##########################################
</pre>
</pre>


(Note: only the last four parameters, imagename, niter, mask and threshold have changed)


<!--
<source lang="python">
2011-04-25 20:10:29 INFO imhead ##########################################
# Pseudo-interactive CASA
2011-04-25 20:10:29 INFO imhead ##### Begin Task: imhead            #####
tclean(vis='ngc5921.demo.uvcontsub.ms', imagename='ngc5921.demo.clean', specmode='cube', niter=6000,  threshold='7.0mJy', imsize=[256,256], cell=['15.0arcsec','15.0arcsec'], outframe='baby', weighting='briggs', robust=0.5, mask = 'clean box.crtf', interactive=False, pblimit=-0.2)
2011-04-25 20:10:29 INFO  imhead::::casa
</source>
2011-04-25 20:10:29 INFO  ImageAnalysis::summary
2011-04-25 20:10:29 INFO ImageAnalysis Image name      : ngc5921.demo.cleanimg.image
2011-04-25 20:10:29 INFO ImageAnalysis Object name      : N5921_2
2011-04-25 20:10:29 INFO ImageAnalysis Image type      : PagedImage
2011-04-25 20:10:29 INFO ImageAnalysis Image quantity  : Intensity
2011-04-25 20:10:29 INFO ImageAnalysis Pixel mask(s)    : None
2011-04-25 20:10:29 INFO ImageAnalysis Region(s)        : None
2011-04-25 20:10:29 INFO ImageAnalysis Image units      : Jy/beam
2011-04-25 20:10:29 INFO ImageAnalysis Restoring Beam  : 51.7693 arcsec, 47.2192 arcsec, -170.658 deg
2011-04-25 20:10:29 INFO  ImageAnalysis::summary
2011-04-25 20:10:29 INFO ImageAnalysis Direction reference : J2000
2011-04-25 20:10:29 INFO ImageAnalysis Spectral  reference : LSRK
2011-04-25 20:10:29 INFO ImageAnalysis Velocity type      : RADIO
2011-04-25 20:10:29 INFO ImageAnalysis Rest frequency      : 1.42041e+09 Hz
2011-04-25 20:10:29 INFO ImageAnalysis Pointing center    :  15:22:00.000000  +05.04.00.000000
2011-04-25 20:10:29 INFO ImageAnalysis Telescope          : VLA
2011-04-25 20:10:29 INFO ImageAnalysis Observer            : TEST
2011-04-25 20:10:29 INFO ImageAnalysis Date observation    : 1995/04/13/09:33:00
2011-04-25 20:10:29 INFO ImageAnalysis Telescope position: [-1.60119e+06m, -5.04198e+06m, 3.55488e+06m] (ITRF)
2011-04-25 20:10:29 INFO  ImageAnalysis::summary+
2011-04-25 20:10:29 INFO ImageAnalysis Axis Coord Type      Name            Proj Shape Tile  Coord value at pixel    Coord incr Units
2011-04-25 20:10:29 INFO ImageAnalysis ------------------------------------------------------------------------------------------------
2011-04-25 20:10:29 INFO ImageAnalysis 0    0    Direction Right Ascension  SIN  256  64  15:22:00.000  128.00 -1.500000e+01 arcsec
2011-04-25 20:10:29 INFO ImageAnalysis 1    0    Direction Declination      SIN  256  64 +05.04.00.000  128.00 1.500000e+01 arcsec
2011-04-25 20:10:29 INFO ImageAnalysis 2    1    Stokes    Stokes                    1    1            I
2011-04-25 20:10:29 INFO ImageAnalysis 3    2    Spectral  Frequency                46    8  1.41279e+09    0.00 2.4414062e+04 Hz
2011-04-25 20:10:29 INFO ImageAnalysis                     Velocity                              1607.99    0.00 -5.152860e+00 km/s
2011-04-25 20:10:29 INFO  imhead::::casa
2011-04-25 20:10:29 INFO imhead ##### End Task: imhead              #####
2011-04-25 20:10:29 INFO imhead ##########################################
</pre>-->


<pre style="background-color:lightgrey;">
Where:
vis='ngc5921.demo.uvcontsub.ms'. # the input measurement set
specmode=cube                    # sets the spectral mode to properly handle line data
cell=['15.0arcsec','15.0arcsec'] # sets the cell (pixel) size
outframe='bary'                  # sets the velocity frame to the extragalactic standard of barycentric
datacolumn='data'                # tells tclean to use the DATA column
imsize=[256,256]                # sets the image size (in pixels)
pblimit=-0.2                    # negative value to not blank pixels beyond a primary beam gain of 20%
weighting='briggs'              # use Briggs weighting...
robust=0.5                      # ...with a robust value of 0.5
imagename='ngc5921.demo.clean'  # the output image name
niter=6000                      # sets the number of clean cycles to 6000 (will stop at threshold value)
mask='cleanbox.crtf'            # use the mask defined in the cleanbox.crtf file created by CARTA
threshold='7.0mJy'              # stop cleaning at this flux level
</pre>


== Additional Science Products ==
==Inspecting the data cube==


If things went well, you should now have a spectral line cube (''ngc5921.demo.tclean.image'') as a primary science product. The demo script illustrates further how to generate cube statistics (using {{imstat}}), an integrated spectrum, and moment maps.
We can use [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.information.imhead.html imhead] to examine the cube header:


=== Cube Statistics ===
<pre style="background-color: #d8bfd8;">
# Interactive CASA
default imhead
inp
imagename='ngc5921.demo.clean.image'
inp
go
</pre>


{{imstat|Imstat}} is the tool for displaying statistics of images and cubes. The following example displays the statistics for an empty region of the whole cube.
<!--
<source lang="python">
<source lang="python">
cubestat=imstat(imagename='ngc5921.demo.clean.image', box='10,10,100,100')
# Pseudo-interactive CASA
imhead(imagename='ngc5921.demo.clean.image', mode='summary')
</source>
</source>


The output, as follows, appears in the logger window:


default('imstat')
<pre style="background-color: #fffacd;">
imagename = clnimage # or imagename = "ngc5921.demo.cleanimg.img"
2023-01-18 21:15:06 INFO imhead ##########################################
# Do whole image
2023-01-18 21:15:06 INFO imhead ##### Begin Task: imhead             #####
box = ''
2023-01-18 21:15:06 INFO imhead imhead( imagename='ngc5921.demo.clean.image', mode='summary', hdkey='', hdvalue='', verbose=False )
# or you could stick to the cleanbox
2023-01-18 21:15:08 INFO ImageMetaData  
#box = '108,108,148,148'
2023-01-18 21:15:08 INFO ImageMetaData Image name      : ngc5921.demo.clean.image
cubestats = imstat()
2023-01-18 21:15:08 INFO ImageMetaData Object name      : N5921_2
 
2023-01-18 21:15:08 INFO ImageMetaData Image type      : PagedImage
 
2023-01-18 21:15:08 INFO ImageMetaData Image quantity  : Intensity
The output goes to the logger window.
2023-01-18 21:15:08 INFO ImageMetaData Pixel mask(s)    : None
 
2023-01-18 21:15:08 INFO ImageMetaData Region(s)       : None
<pre>
2023-01-18 21:15:08 INFO ImageMetaData Image units      : Jy/beam
2018-09-13 23:55:54 INFO imstat ##########################################
2023-01-18 21:15:08 INFO ImageMetaData Restoring Beams
2018-09-13 23:55:54 INFO imstat ##### Begin Task: imstat             #####
2023-01-18 21:15:08 INFO ImageMetaData Pol  Type Chan        Freq    Vel
2018-09-13 23:55:54 INFO imstat imstat(imagename="ngc5921.demo.clean.image",axes=-1,region="",box="10,10,100,100",chans="",
2023-01-18 21:15:08 INFO ImageMetaData   I    Max    0 1.41273e+09 1619.82  53.0827 arcsec x  47.0911 arcsec pa=  7.9378 deg
2018-09-13 23:55:54 INFO imstat         stokes="",listit=True,verbose=True,mask="",stretch=False,
2023-01-18 21:15:08 INFO ImageMetaData   I    Min  48 1.41390e+09 1372.47  53.0292 arcsec x  46.9723 arcsec pa=  9.2164 deg
2018-09-13 23:55:54 INFO imstat         logfile="",append=True,algorithm="classic",fence=-1,center="mean",
2023-01-18 21:15:08 INFO ImageMetaData   I Median  31 1.41349e+09 1460.08  53.1100 arcsec x  47.0231 arcsec pa=  8.0658 deg
2018-09-13 23:55:54 INFO imstat         lside=True,zscore=-1,maxiter=-1,clmethod="auto",niter=3)
2023-01-18 21:15:08 INFO ImageMetaData  
2018-09-13 23:55:54 INFO imstat Using specified box(es) 10,10,100,100
2023-01-18 21:15:08 INFO ImageMetaData Direction reference : J2000
2018-09-13 23:55:54 INFO imstat Determining stats for image ngc5921.demo.clean.image
2023-01-18 21:15:08 INFO ImageMetaData Spectral  reference : BARY
2018-09-13 23:55:54 INFO imstat Selected bounding box :  
2023-01-18 21:15:08 INFO ImageMetaData Velocity  type      : RADIO
2018-09-13 23:55:54 INFO imstat     [10, 10, 0, 0] to [100, 100, 0, 45]  (15:23:58.379, +04.34.29.305, I, 1.41279e+09Hz to 15:22:28.105, +04.56.59.962, I, 1.41389e+09Hz)
2023-01-18 21:15:08 INFO ImageMetaData Rest frequency      : 1.42041e+09 Hz
2018-09-13 23:55:54 INFO imstat Statistics calculated using Classic algorithm
2023-01-18 21:15:08 INFO ImageMetaData Pointing center    :  15:22:00.000000  +05.04.00.000000
2018-09-13 23:55:54 INFO imstat Regions ---
2023-01-18 21:15:08 INFO ImageMetaData Telescope          : VLA
2018-09-13 23:55:54 INFO imstat         -- bottom-left corner (pixel) [blc]: [10, 10, 0, 0]
2023-01-18 21:15:08 INFO ImageMetaData Observer            : TEST
2018-09-13 23:55:54 INFO imstat         -- top-right corner (pixel) [trc]:   [100, 100, 0, 45]
2023-01-18 21:15:08 INFO ImageMetaData Date observation    : 1995/04/13/09:33:00.000687
2018-09-13 23:55:54 INFO imstat         -- bottom-left corner (world) [blcf]: 15:23:58.379, +04.34.29.305, I, 1.41279e+09Hz
2023-01-18 21:15:08 INFO ImageMetaData Telescope position: [-1.60119e+06m, -5.04198e+06m, 3.55488e+06m] (ITRF)
2018-09-13 23:55:54 INFO imstat         -- top-right corner (world) [trcf]:   15:22:28.105, +04.56.59.962, I, 1.41389e+09Hz
2023-01-18 21:15:08 INFO ImageMetaData  
2018-09-13 23:55:54 INFO imstat Values ---
2023-01-18 21:15:08 INFO ImageMetaData Axis Coord Type      Name            Proj Shape Tile  Coord value at pixel   Coord incr Units
2018-09-13 23:55:54 INFO imstat         -- flux [flux]:                           1.98066 Jy.km/s
2023-01-18 21:15:08 INFO ImageMetaData ------------------------------------------------------------------------------------------------  
2018-09-13 23:55:54 INFO imstat         -- number of points [npts]:               380926
2023-01-18 21:15:08 INFO ImageMetaData 0    0    Direction Right Ascension  SIN  256  64 15:22:00.000  128.00 -1.500000e+01 arcsec
2018-09-13 23:55:54 INFO imstat         -- maximum value [max]:                   0.00952374 Jy/beam
2023-01-18 21:15:08 INFO ImageMetaData 1    0    Direction Declination      SIN  256  64 +05.04.00.000  128.00  1.500000e+01 arcsec
2018-09-13 23:55:54 INFO imstat         -- minimum value [min]:                   -0.0100571 Jy/beam
2023-01-18 21:15:08 INFO ImageMetaData 2    1    Stokes    Stokes                    1    1            I
2018-09-13 23:55:54 INFO imstat         -- position of max value (pixel) [maxpos]: [85, 63, 0, 8]
2023-01-18 21:15:08 INFO ImageMetaData 3    2    Spectral  Frequency                63    9  1.41273e+09    0.00 2.4415203e+04 Hz
2018-09-13 23:55:54 INFO imstat         -- position of min value (pixel) [minpos]: [30, 18, 0, 7]
2023-01-18 21:15:08 INFO ImageMetaData                     Velocity                              1619.82    0.00 -5.153101e+00 km/s
2018-09-13 23:55:54 INFO imstat         -- position of max value (world) [maxposf]: 15:22:43.151, +04.47.44.907, I, 1.41298e+09Hz
2023-01-18 21:15:08 INFO imhead Task imhead complete. Start time: 2023-01-18 14:15:06.134860 End time: 2023-01-18 14:15:07.997282
2018-09-13 23:55:54 INFO imstat         -- position of min value (world) [minposf]: 15:23:38.319, +04.36.29.518, I, 1.41296e+09Hz
2023-01-18 21:15:08 INFO imhead ##### End Task: imhead               #####
2018-09-13 23:55:54 INFO imstat         -- Sum of pixel values [sum]:              4.72505 Jy/beam
2023-01-18 21:15:08 INFO imhead ##########################################
2018-09-13 23:55:54 INFO imstat         -- Sum of squared pixel values [sumsq]:    1.38067 Jy/beam.Jy/beam
2018-09-13 23:55:54 INFO imstat Statistics ---  
2018-09-13 23:55:54 INFO imstat         -- Mean of the pixel values [mean]:        1.24041e-05 Jy/beam
2018-09-13 23:55:54 INFO imstat         -- Variance of the pixel values :          3.62436e-06 Jy/beam
2018-09-13 23:55:54 INFO imstat         -- Standard deviation of the Mean [sigma]:  0.00190378 Jy/beam
2018-09-13 23:55:54 INFO imstat         -- Root mean square [rms]:                  0.00190381 Jy/beam
2018-09-13 23:55:54 INFO imstat         -- Median of the pixel values [median]:    6.54527e-06 Jy/beam
2018-09-13 23:55:54 INFO imstat         -- Median of the deviations [medabsdevmed]: 0.00127726 Jy/beam
2018-09-13 23:55:54 INFO imstat         -- IQR [quartile]:                          0.00255404 Jy/beam
2018-09-13 23:55:54 INFO imstat         -- First quartile [q1]:                    -0.00126623 Jy/beam
2018-09-13 23:55:54 INFO imstat         -- Third quartile [q3]:                    0.0012878 Jy/beam
2018-09-13 23:55:54 INFO imstat Created Temp image of shape [1, 1, 1, 1] with float valued pixels.
2018-09-13 23:55:54 INFO imstat Sum column unit = Jy/beam
2018-09-13 23:55:54 INFO imstat Mean column unit = Jy/beam
2018-09-13 23:55:54 INFO imstat Std_dev column unit = Jy/beam
2018-09-13 23:55:54 INFO imstat Minimum column unit = Jy/beam
2018-09-13 23:55:54 INFO imstat Maximum column unit = Jy/beam
2018-09-13 23:55:54 INFO imstat Npts          Sum          Mean          Rms          Std_dev      Minimum      Maximum   
2018-09-13 23:55:54 INFO imstat 3.809260e+05  4.725051e+00  1.240412e-05  1.903813e-03  1.903775e-03 -1.005711e-02  9.523738e-03
2018-09-13 23:55:54 INFO imstat ##### End Task: imstat               #####
2018-09-13 23:55:54 INFO imstat ##########################################
</pre>
</pre>




If you executed {{tclean}}() instead of {{clean}}() in previous steps, then your image statistics may look like this:
=== Cube statistics ===
 
-->


<source lang="python">
We can use [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.information.imstat.html imstat] to  display statistics of the cube cubes. The following example displays the statistics for an empty region of the cube (as identified visually in CARTA).
cubestat=imstat(imagename='ngc5921.demo.tclean.image', box='10,10,100,100')
</source>


<!--
<pre style="background-color: #d8bfd8;">
<pre>
#Interactive CASA
2018-09-13 23:57:15 INFO imstat ##########################################
default instate
2018-09-13 23:57:15 INFO imstat ##### Begin Task: imstat            #####
inp
2018-09-13 23:57:15 INFO imstat imstat(imagename="ngc5921.demo.tclean.image",axes=-1,region="",box="10,10,100,100",chans="",
imagename = 'ngc5921.demo.clean.image'
2018-09-13 23:57:15 INFO imstat         stokes="",listit=True,verbose=True,mask="",stretch=False,
box = '10,10,100,100'
2018-09-13 23:57:15 INFO imstat         logfile="",append=True,algorithm="classic",fence=-1,center="mean",
inp
2018-09-13 23:57:15 INFO imstat         lside=True,zscore=-1,maxiter=-1,clmethod="auto",niter=3)
go
2018-09-13 23:57:15 INFO imstat Using specified box(es) 10,10,100,100
2018-09-13 23:57:15 INFO imstat Determining stats for image ngc5921.demo.tclean.image
2018-09-13 23:57:15 INFO imstat Selected bounding box :
2018-09-13 23:57:15 INFO imstat     [10, 10, 0, 0] to [100, 100, 0, 45]  (15:23:58.379, +04.34.29.305, I, 1.41279e+09Hz to 15:22:28.105, +04.56.59.962, I, 1.41389e+09Hz)
2018-09-13 23:57:15 INFO imstat Statistics calculated using Classic algorithm
2018-09-13 23:57:15 INFO imstat Regions ---
2018-09-13 23:57:15 INFO imstat         -- bottom-left corner (pixel) [blc]:  [10, 10, 0, 0]
2018-09-13 23:57:15 INFO imstat         -- top-right corner (pixel) [trc]:    [100, 100, 0, 45]
2018-09-13 23:57:15 INFO imstat         -- bottom-left corner (world) [blcf]: 15:23:58.379, +04.34.29.305, I, 1.41279e+09Hz
2018-09-13 23:57:15 INFO imstat         -- top-right corner (world) [trcf]:  15:22:28.105, +04.56.59.962, I, 1.41389e+09Hz
2018-09-13 23:57:15 INFO imstat Values ---
2018-09-13 23:57:15 INFO imstat         -- flux [flux]:                            1.63176 Jy.km/s
2018-09-13 23:57:15 INFO imstat         -- number of points [npts]:                380926
2018-09-13 23:57:15 INFO imstat         -- maximum value [max]:                    0.00823404 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- minimum value [min]:                    -0.00943008 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- position of max value (pixel) [maxpos]: [61, 54, 0, 42]
2018-09-13 23:57:15 INFO imstat         -- position of min value (pixel) [minpos]: [30, 18, 0, 7]
2018-09-13 23:57:15 INFO imstat         -- position of max value (world) [maxposf]: 15:23:07.232, +04.45.29.778, I, 1.41381e+09Hz
2018-09-13 23:57:15 INFO imstat         -- position of min value (world) [minposf]: 15:23:38.319, +04.36.29.518, I, 1.41296e+09Hz
2018-09-13 23:57:15 INFO imstat         -- Sum of pixel values [sum]:              3.89979 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- Sum of squared pixel values [sumsq]:    1.23177 Jy/beam.Jy/beam
2018-09-13 23:57:15 INFO imstat Statistics ---
2018-09-13 23:57:15 INFO imstat         -- Mean of the pixel values [mean]:        1.02377e-05 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- Variance of the pixel values :          3.23353e-06 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- Standard deviation of the Mean [sigma]:  0.0017982 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- Root mean square [rms]:                  0.00179823 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- Median of the pixel values [median]:    1.07091e-05 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- Median of the deviations [medabsdevmed]: 0.00120728 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- IQR [quartile]:                          0.00241453 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- First quartile [q1]:                    -0.00119593 Jy/beam
2018-09-13 23:57:15 INFO imstat         -- Third quartile [q3]:                    0.00121859 Jy/beam
2018-09-13 23:57:15 INFO imstat Created Temp image  of shape [1, 1, 1, 1] with float valued pixels.
2018-09-13 23:57:15 INFO imstat Sum column unit = Jy/beam
2018-09-13 23:57:15 INFO imstat Mean column unit = Jy/beam
2018-09-13 23:57:15 INFO imstat Std_dev column unit = Jy/beam
2018-09-13 23:57:15 INFO imstat Minimum column unit = Jy/beam
2018-09-13 23:57:15 INFO imstat Maximum column unit = Jy/beam
2018-09-13 23:57:15 INFO imstat Npts          Sum          Mean          Rms          Std_dev      Minimum      Maximum   
2018-09-13 23:57:15 INFO imstat 3.809260e+05  3.899789e+00  1.023766e-05  1.798228e-03  1.798201e-03 -9.430082e-03  8.234036e-03
2018-09-13 23:57:15 INFO imstat ##### End Task: imstat              #####
2018-09-13 23:57:15 INFO imstat ##########################################
</pre>
</pre>
-->


<pre>
As with imhead, the output goes to the logger window:
2019-09-03 22:40:15 INFO imstat ##########################################
 
2019-09-03 22:40:15 INFO imstat ##### Begin Task: imstat            #####
<pre style="background-color: #fffacd;">
2019-09-03 22:40:15 INFO imstat imstat(imagename="ngc5921.demo.tclean.image",axes=-1,region="",box="10,10,100,100",chans="",
2023-01-18 21:42:36 INFO imstat ##########################################
2019-09-03 22:40:15 INFO imstat         stokes="",listit=True,verbose=True,mask="",stretch=False,
2023-01-18 21:42:36 INFO imstat ##### Begin Task: imstat            #####
2019-09-03 22:40:15 INFO imstat         logfile="",append=True,algorithm="classic",fence=-1,center="mean",
2023-01-18 21:42:36 INFO imstat imstat( imagename='ngc5921.demo.clean.image', axes=[], region='', box='10,10,100,100', chans='', stokes='', listit=True, verbose=True, mask='', stretch=False, logfile='', append=True, algorithm='classic', fence=-1.0, center='mean', lside=True, zscore=-1.0, maxiter=-1, clmethod='auto', niter=3 )
2019-09-03 22:40:15 INFO imstat         lside=True,zscore=-1,maxiter=-1,clmethod="auto",niter=3)
2023-01-18 21:42:36 INFO imstat Using specified box(es) 10,10,100,100
2019-09-03 22:40:15 INFO imstat Using specified box(es) 10,10,100,100
2023-01-18 21:42:36 INFO imstat Determining stats for image ngc5921.demo.clean.image
2019-09-03 22:40:15 INFO imstat Determining stats for image ngc5921.demo.tclean.image
2023-01-18 21:42:36 INFO imstat Selected bounding box :  
2019-09-03 22:40:15 INFO imstat Selected bounding box :  
2023-01-18 21:42:36 INFO imstat     [10, 10, 0, 0] to [100, 100, 0, 62]  (15:23:58.379, +04.34.29.305, I, 1.41273e+09Hz to 15:22:28.105, +04.56.59.962, I, 1.41424e+09Hz)
2019-09-03 22:40:15 INFO imstat     [10, 10, 0, 0] to [100, 100, 0, 45]  (15:23:58.379, +04.34.29.305, I, 1.41279e+09Hz to 15:22:28.105, +04.56.59.962, I, 1.41389e+09Hz)
2023-01-18 21:42:36 INFO imstat Statistics calculated using Classic algorithm
2019-09-03 22:40:15 INFO imstat Statistics calculated using Classic algorithm
2023-01-18 21:42:36 INFO imstat Regions ---  
2019-09-03 22:40:15 INFO imstat Regions ---  
2023-01-18 21:42:36 INFO imstat         -- bottom-left corner (pixel) [blc]:  [10, 10, 0, 0]
2019-09-03 22:40:15 INFO imstat         -- bottom-left corner (pixel) [blc]:  [10, 10, 0, 0]
2023-01-18 21:42:36 INFO imstat         -- top-right corner (pixel) [trc]:    [100, 100, 0, 62]
2019-09-03 22:40:15 INFO imstat         -- top-right corner (pixel) [trc]:    [100, 100, 0, 45]
2023-01-18 21:42:36 INFO imstat         -- bottom-left corner (world) [blcf]: 15:23:58.379, +04.34.29.305, I, 1.41273e+09Hz
2019-09-03 22:40:15 INFO imstat         -- bottom-left corner (world) [blcf]: 15:23:58.379, +04.34.29.305, I, 1.41279e+09Hz
2023-01-18 21:42:36 INFO imstat         -- top-right corner (world) [trcf]:  15:22:28.105, +04.56.59.962, I, 1.41424e+09Hz
2019-09-03 22:40:15 INFO imstat         -- top-right corner (world) [trcf]:  15:22:28.105, +04.56.59.962, I, 1.41389e+09Hz
2023-01-18 21:42:36 INFO imstat Values ---  
2019-09-03 22:40:15 INFO imstat Values ---  
2023-01-18 21:42:36 INFO imstat         -- flux [flux]:                            1.41948 Jy.km/s
2019-09-03 22:40:15 INFO imstat         -- flux [flux]:                            1.99425 Jy.km/s
2023-01-18 21:42:36 INFO imstat         -- number of points [npts]:                521703
2019-09-03 22:40:15 INFO imstat         -- number of points [npts]:                380926
2023-01-18 21:42:36 INFO imstat         -- maximum value [max]:                    0.0230701 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- maximum value [max]:                    0.00953276 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- minimum value [min]:                    -0.0222025 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- minimum value [min]:                    -0.0100478 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- position of max value (pixel) [maxpos]: [20, 44, 0, 61]
2019-09-03 22:40:15 INFO imstat         -- position of max value (pixel) [maxpos]: [85, 63, 0, 8]
2023-01-18 21:42:36 INFO imstat         -- position of min value (pixel) [minpos]: [35, 70, 0, 61]
2019-09-03 22:40:15 INFO imstat         -- position of min value (pixel) [minpos]: [30, 18, 0, 7]
2023-01-18 21:42:36 INFO imstat         -- position of max value (world) [maxposf]: 15:23:48.368, +04.42.59.428, I, 1.41422e+09Hz
2019-09-03 22:40:15 INFO imstat         -- position of max value (world) [maxposf]: 15:22:43.151, +04.47.44.907, I, 1.41298e+09Hz
2023-01-18 21:42:36 INFO imstat         -- position of min value (world) [minposf]: 15:23:33.331, +04.49.29.579, I, 1.41422e+09Hz
2019-09-03 22:40:15 INFO imstat         -- position of min value (world) [minposf]: 15:23:38.319, +04.36.29.518, I, 1.41296e+09Hz
2023-01-18 21:42:36 INFO imstat         -- Sum of pixel values [sum]:              3.46393 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Sum of pixel values [sum]:              4.76561 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- Sum of squared pixel values [sumsq]:    2.32674 Jy/beam.Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Sum of squared pixel values [sumsq]:    1.38125 Jy/beam.Jy/beam
2023-01-18 21:42:36 INFO imstat Statistics ---  
2019-09-03 22:40:15 INFO imstat Statistics ---  
2023-01-18 21:42:36 INFO imstat         -- Mean of the pixel values [mean]:        6.63965e-06 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Mean of the pixel values [mean]:        1.25106e-05 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- Variance of the pixel values :          4.45985e-06 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Variance of the pixel values :          3.62589e-06 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- Standard deviation of the Mean [sigma]:  0.00211184 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Standard deviation of the Mean [sigma]:  0.00190418 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- Root mean square [rms]:                  0.00211184 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Root mean square [rms]:                  0.00190421 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- Median of the pixel values [median]:    0 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Median of the pixel values [median]:    6.37541e-06 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- Median of the deviations [medabsdevmed]: 0.00126323 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Median of the deviations [medabsdevmed]: 0.00127676 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- IQR [quartile]:                          0.00252672 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- IQR [quartile]:                          0.00255348 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- First quartile [q1]:                    -0.00125785 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- First quartile [q1]:                    -0.00126604 Jy/beam
2023-01-18 21:42:36 INFO imstat         -- Third quartile [q3]:                    0.00126887 Jy/beam
2019-09-03 22:40:15 INFO imstat         -- Third quartile [q3]:                    0.00128744 Jy/beam
2023-01-18 21:42:36 INFO imstat Sum column unit = Jy/beam
2019-09-03 22:40:15 INFO imstat Sum column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat Mean column unit = Jy/beam
2019-09-03 22:40:15 INFO imstat Mean column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat Std_dev column unit = Jy/beam
2019-09-03 22:40:15 INFO imstat Std_dev column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat Minimum column unit = Jy/beam
2019-09-03 22:40:15 INFO imstat Minimum column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat Maximum column unit = Jy/beam
2019-09-03 22:40:15 INFO imstat Maximum column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat Npts          Sum          Mean          Rms          Std_dev      Minimum      Maximum     
2019-09-03 22:40:15 INFO imstat Npts          Sum          Mean          Rms          Std_dev      Minimum      Maximum     
2023-01-18 21:42:36 INFO imstat 5.217030e+05  3.463928e+00  6.639655e-06 2.111845e-03  2.111836e-03 -2.220254e-02  2.307010e-02
2019-09-03 22:40:15 INFO imstat 3.809260e+05  4.765615e+00  1.251060e-05 1.904215e-03  1.904176e-03 -1.004781e-02  9.532760e-03
2023-01-18 21:42:36 INFO imstat Task imstat complete. Start time: 2023-01-18 14:42:36.025027 End time: 2023-01-18 14:42:36.481128
2019-09-03 22:40:15 INFO imstat ##### End Task: imstat              #####
2023-01-18 21:42:36 INFO imstat ##### End Task: imstat              #####
2019-09-03 22:40:15 INFO imstat ##########################################
2023-01-18 21:42:36 INFO imstat ##########################################
</pre>
</pre>


<!--
Alternatively, we can use the cleanbox.crtf file created earlier to examine the stats in the region containing the source:
2011-04-25 20:12:13 INFO imstat ##########################################
2011-04-25 20:12:13 INFO imstat ##### Begin Task: imstat            #####
2011-04-25 20:12:13 INFO  imstat::::casa
2011-04-25 20:12:13 INFO imstat No region specified. Using full positional plane.
2011-04-25 20:12:13 INFO imstat Using all spectral channels.
2011-04-25 20:12:13 INFO imstat Using polarizations I
2011-04-25 20:12:13 INFO imstat Determining stats for image ngc5921.demo.clean.image
2011-04-25 20:12:13 INFO imstat Selected bounding box :
2011-04-25 20:12:13 INFO imstat     [0, 0, 0, 0] to [255, 255, 0, 45]  (15:24:08.404, +04.31.59.181, I, 1.41279e+09Hz to 15:19:52.390, +05.35.44.246, I, 1.41389e+09Hz)
2011-04-25 20:12:13 INFO imstat Regions ---
2011-04-25 20:12:13 INFO imstat         -- bottom-left corner (pixel) [blc]:  [0, 0, 0, 0]
2011-04-25 20:12:13 INFO imstat         -- top-right corner (pixel) [trc]:    [255, 255, 0, 45]
2011-04-25 20:12:13 INFO imstat         -- bottom-left corner (world) [blcf]: 15:24:08.404, +04.31.59.181, I, 1.41279e+09Hz
2011-04-25 20:12:13 INFO imstat         -- top-right corner (world) [trcf]:  15:19:52.390, +05.35.44.246, I, 1.41389e+09Hz
2011-04-25 20:12:13 INFO imstat Values ---
2011-04-25 20:12:13 INFO imstat         -- flux density [flux]:    4.14845 Jy
2011-04-25 20:12:13 INFO imstat         -- number of points [npts]:                3.01466e+06
2011-04-25 20:12:13 INFO imstat         -- maximum value [max]:                    0.0555024 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- minimum value [min]:                    -0.0107881 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- position of max value (pixel) [maxpos]: [134, 134, 0, 38]
2011-04-25 20:12:13 INFO imstat         -- position of min value (pixel) [minpos]: [230, 0, 0, 15]
2011-04-25 20:12:13 INFO imstat         -- position of max value (world) [maxposf]: 15:21:53.976, +05.05.29.998, I, 1.41371e+09Hz
2011-04-25 20:12:13 INFO imstat         -- position of min value (world) [maxposf]: 15:20:17.679, +04.31.59.470, I, 1.41315e+09Hz
2011-04-25 20:12:13 INFO imstat         -- Sum of pixel values [sum]:              51.0692 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- Sum of squared pixel values [sumsq]:    12.2781 Jy/beam.Jy/beam
2011-04-25 20:12:13 INFO  imstat::::
2011-04-25 20:12:13 INFO imstat Statistics ---
2011-04-25 20:12:13 INFO imstat         -- Mean of the pixel values [mean]:        1.69403e-05 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- Variance of the pixel values :          4.07252e-06 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- Standard deviation of the Mean [sigma]:  0.00201805 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- Root mean square [rms]:                  0.00201812 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- Median of the pixel values [median]:    -1.18009e-05 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- Median of the deviations [medabsdevmed]: 0.00126199 Jy/beam
2011-04-25 20:12:13 INFO imstat         -- Quartile [quartile]:                    0.00252393 Jy/beam
2011-04-25 20:12:13 INFO  imstat::::casa
2011-04-25 20:12:13 INFO imstat ##### End Task: imstat              #####
2011-04-25 20:12:13 INFO imstat ##########################################
</pre> -->


=== The Integrated Spectrum ===
<pre style="background-color: #d8bfd8;">
#Interactive CASA
default instate
inp
imagename = 'ngc5921.demo.clean.image'
box = ''
region='cleanbox.crtf'
inp
go
</pre>


[[File:spectrum-integrated.png|thumb|Example of the {{viewer}} rectangle selection tool on one channel of the NGC&nbsp;5921 21&nbsp;cm data cube. The spectral profile window is shown at right.]]
Which gives the output:


<pre style="background-color: #fffacd;">
2023-01-18 21:44:58 INFO imstat ##########################################
2023-01-18 21:44:58 INFO imstat ##### Begin Task: imstat            #####
2023-01-18 21:44:58 INFO imstat imstat( imagename='ngc5921.demo.clean.image', axes=[], region='cleanbox.crtf', box='', chans='', stokes='', listit=True, verbose=True, mask='', stretch=False, logfile='', append=True, algorithm='classic', fence=-1.0, center='mean', lside=True, zscore=-1.0, maxiter=-1, clmethod='auto', niter=3 )
2023-01-18 21:44:59 INFO imstat RegionTextParser::_determineVersion: Found spec version 0
2023-01-18 21:44:59 INFO imstat Combined 1 image regions (which excludes any annotation regions)
2023-01-18 21:44:59 INFO imstat The specified region will select all pixels that are included in the region. Full pixels will be included even when they are only partially covered by the region(s).
2023-01-18 21:44:59 INFO imstat Region read from CRTF file cleanbox.crtf
2023-01-18 21:44:59 INFO imstat Determining stats for image ngc5921.demo.clean.image
2023-01-18 21:44:59 INFO imstat Selected bounding box :
2023-01-18 21:44:59 INFO imstat     [111, 107, 0, 0] to [150, 151, 0, 62]  (15:22:17.064, +04.58.44.986, I, 1.41273e+09Hz to 15:21:37.910, +05.09.44.977, I, 1.41424e+09Hz)
2023-01-18 21:44:59 INFO imstat Statistics calculated using Classic algorithm
2023-01-18 21:44:59 INFO imstat Regions ---
2023-01-18 21:44:59 INFO imstat         -- bottom-left corner (pixel) [blc]:  [111, 107, 0, 0]
2023-01-18 21:44:59 INFO imstat         -- top-right corner (pixel) [trc]:    [150, 151, 0, 62]
2023-01-18 21:44:59 INFO imstat         -- bottom-left corner (world) [blcf]: 15:22:17.064, +04.58.44.986, I, 1.41273e+09Hz
2023-01-18 21:44:59 INFO imstat         -- top-right corner (world) [trcf]:  15:21:37.910, +05.09.44.977, I, 1.41424e+09Hz
2023-01-18 21:44:59 INFO imstat Values ---
2023-01-18 21:44:59 INFO imstat         -- flux [flux]:                            28.2043 Jy.km/s
2023-01-18 21:44:59 INFO imstat         -- number of points [npts]:                113400
2023-01-18 21:44:59 INFO imstat         -- maximum value [max]:                    0.0559169 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- minimum value [min]:                    -0.0221281 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- position of max value (pixel) [maxpos]: [134, 134, 0, 43]
2023-01-18 21:44:59 INFO imstat         -- position of min value (pixel) [minpos]: [145, 138, 0, 61]
2023-01-18 21:44:59 INFO imstat         -- position of max value (world) [maxposf]: 15:21:53.976, +05.05.29.998, I, 1.41378e+09Hz
2023-01-18 21:44:59 INFO imstat         -- position of min value (world) [minposf]: 15:21:42.932, +05.06.29.986, I, 1.41422e+09Hz
2023-01-18 21:44:59 INFO imstat         -- Sum of pixel values [sum]:              68.8153 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- Sum of squared pixel values [sumsq]:    2.27782 Jy/beam.Jy/beam
2023-01-18 21:44:59 INFO imstat Statistics ---
2023-01-18 21:44:59 INFO imstat         -- Mean of the pixel values [mean]:        0.000606837 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- Variance of the pixel values :          1.97185e-05 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- Standard deviation of the Mean [sigma]:  0.00444055 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- Root mean square [rms]:                  0.0044818 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- Median of the pixel values [median]:    0 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- Median of the deviations [medabsdevmed]: 0.00138569 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- IQR [quartile]:                          0.00277213 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- First quartile [q1]:                    -0.001358 Jy/beam
2023-01-18 21:44:59 INFO imstat         -- Third quartile [q3]:                    0.00141413 Jy/beam
2023-01-18 21:44:59 INFO imstat Sum column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat Mean column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat Std_dev column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat Minimum column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat Maximum column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat Npts          Sum          Mean          Rms          Std_dev      Minimum      Maximum   
2023-01-18 21:44:59 INFO imstat 1.134000e+05  6.881528e+01  6.068366e-04  4.481805e-03  4.440551e-03 -2.212812e-02  5.591685e-02
2023-01-18 21:44:59 INFO imstat Task imstat complete. Start time: 2023-01-18 14:44:58.195518 End time: 2023-01-18 14:44:59.067297
2023-01-18 21:44:59 INFO imstat ##### End Task: imstat              #####
2023-01-18 21:44:59 INFO imstat ##########################################
</pre>


We saw earlier [[#Plot the Spectrum|how to generate an integrated spectrum]] from the (''u'', ''v'') measurement set. Here's how to produce the integrated spectrum from the spectral line cube. First, load the cube into {{viewer}}.
=== The integrated spectrum ===


<source lang="python">
[[File:spectrum-integrated_6.5.2.png|thumb|Example of the CARTA rectangle selection tool on one channel of the NGC&nbsp;5921 21&nbsp;cm data cube. The spectral profile window is shown at right. This is the same channel shown in the dirty cube [[#Imaging|above]]. Click to enlarge.]]
viewer(infile='ngc5921.demo.tclean.image')
</source>


<!--
CARTA can be used to produce an integrated spectrum from the spectral line cube. Once you have defined a region (you can use the region used earlier to define the region to be cleaned), you can set the Z profile statistic to 'Sum' to see the spectrum of the pixels summed in this region in each channel, 'Mean' to see the mean spectrum, or 'FluxDensity' to see the beam-corrected flux density spectrum (which is probably what you want). Different plotting and smoothing options are available, and you can export an image of the spectrum or export the data (as a tab-separated variables file, which you can then read into your favorite plotting program, iPython notebook, etc.).
# Store the name of the clean image into a python global
clnimage = imname+'.image'
viewer(clnimage)
-->


To generate the integrated spectrum, perform the following tasks.
=== Cube moments ===
* Use the player controls [[File:vcrNext.png]] to inspect the cube one channel at a time.
* From the {{viewer}} Tools menu, select '''Spectral Profile'''. A new graphics window should appear.
* By default, the rectangle selection tool [[File:drawingSelector.png]] is assigned to the right mouse button, and you can just right-click and drag a box over the region where you want to (spatially) integrate the spectrum. See the figure at upper right.
* Alternatively, you can assign one of the other selection tools by right-clicking on the appropriate button.
* The spectrum now appears in the graphics window; see the figure at right.


You can save the integrated spectrum to a text file by clicking the [[File:save_to_text.png]] button on the graphics window. There are also buttons to print the figure or save the figure to disk.
[[File:mom0_mom1_casa6_5_2.png|thumb|The moment 0 (integrated intensity) and moment 1 (velocity field) 21&nbsp;cm images of NGC&nbsp;5921, produced using [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.analysis.immoments.html immoments] and displayed with CARTA. Click to enlarge.]]


Cube moments are maps of weighted sums along the velocity axis. In CASA, they are generated by the task [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.analysis.immoments.html immoments]. The zeroth moment (moments = 0) is a sum of intensities along the velocity axis (the integrated intensity map); the first moment (moment = 1) is the sum of velocities weighted by intensity (the ''velocity field''); the second moment (moment = 2) is a map of the velocity dispersion; see the immoments documentation for additional options.


=== Cube Moments ===
The following example produces maps of the zeroth and first moments, or the integrated intensity and velocity field. To form these maps, we will mask out pixels without signal (below 3 sigma) using hard global limits. We will also collapse along the spectral (channel) axis (the default) and include those channels that show flux in the integrated spectrum, i.e. 9~48.


[[File:spectrum-momzero.png|thumb|The moment 0 (integrated intensity) 21&nbsp;cm image of NGC&nbsp;5921, produced using {{immoments}}]]
<pre style="background-color: #d8bfd8;">
 
#Interactive CASA
Cube moments are maps of weighted sums along the velocity axis. In CASA, they are generated by the task {{immoments}}. The zeroth moment (moments = 0) is a sum of intensities along the velocity axis (the integrated intensity map); the first moment (moment = 1) is the sum of velocities weighted by intensity (the ''velocity field''); the second moment (moment = 2) is a map of the velocity dispersion; see the {{immoments|helpfile}} for additional options.
default immoments
 
inp
The following example produces maps of the zeroth and first moments, or the integrated intensity and velocity field. The respective measurement sets are the moment zero image ''ngc5921.demo.moments.integrated'' and moment one image''ngc5921.demo.moments.weighted_coord''.
imagename='ngc5921.demo.clean.image'
 
moments=[0,1]
We will do the zeroth and first moments and mask out noisy pixels using hard global limits. We will also collapse along the spectral (channel) axis and include all planes.
chans='9~48'
excludepix=[-100,0.00525]
outfile='ngc5921.demo.moment'
inp
go
</pre>


<source lang="python">
<source lang="python">
immoments(imagename='ngc5921.demo.tclean.image', moments=[0,1], excludepix=[-100, 0.009], axis='spectral', chans='', outfile='ngc5921.demo.moments')
#Pseudo-interactive CASA
immoments(imagename='ngc5921.demo.clean.image', moments=[0,1], excludepix=[-100, 0.00525], axis='spectral', chans='9~48', outfile='ngc5921.demo.moment')
</source>
</source>


* moments = [0,1] : Do zeroth and first moments
Where:
* excludepix = [-100,0.009] : Mask out noisy pixels using hard global limits
* axis  = 'spectral' : Collapse along the spectral (channel) axis
* chans = '' :Include all planes


<!--
<pre style="background-color:lightgrey;">
default('immoments')
imagename='ngc5921.demo.clean.image' # input image cube
imagename = clnimage
moments = [0,1]                     # do zeroth and first moments
# Do zeroth and first moments
excludepix = [-100,0.00525]         # use only pixels > 3 sigma
moments = [0,1]
outfile='ngc5921.demo.moment'       # the output filename root (or filename if only doing one moment)
# Need to mask out noisy pixels, currently done
</pre>
# using hard global limits
excludepix = [-100,0.009]
# Collapse along the spectral (channel) axis
axis  = 'spectral'
# Include all planes
chans = ''
# Output root name
momfile = prefix + '.moments'
outfile = momfile
saveinputs('immoments',prefix+'.immoments.saved')
immoments()
momzeroimage = momfile + '.integrated'
momoneimage = momfile + '.weighted_coord'
-->


To examine the moment images, use {{viewer}}; the resulting moment zero image is displayed at right. Note that you may have to play with the color map (Data Display Options button in viewer) in order to replicate the image in this tutorial.
You will get a lot of warnings in the logger and the terminal about the convolving kernel having a size less than the pixel diagonal length. This is because immoments has to convolve all of the channels to have the same beam size prior to forming the moment map, but as they all have very similar beam sizes already the convolving kernel needed for this is fairly small. These warnings can be ignored.


<source lang="python">
Two files are created by this: ''ngc5921.demo.moment.integrated'' (the zeroth moment) and ''ngc5921.demo.moment.weighted_coord'' (the first moment). These can be opened and manipulated in CARTA.
viewer(infile='ngc5921.demo.moments.integrated')
</source>


== Export the Data ==
== Export the Data ==


To export the (''u'', ''v'') data and image cube as FITS files, use {{exportuvfits}} and {{exportfits}}, respectively.
To export the uv data and the image cube as FITS files, use [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.data.exportuvfits.html exportuvfits] and [https://casadocs.readthedocs.io/en/v6.5.2/api/tt/casatasks.data.exportfits.html exportfits] respectively.


Here's how to export the continuum-subtracted (''u'', ''v'') data.
For example, to export the continuum-subtracted uv data (the measurement set we used as input to tclean):
 
<pre style="background-color: #d8bfd8;">
#Interactive python
default exportuvfits
inp
vis='ngc5921.demo.uvcontsub.ms'
fitsfile='ngc5921.demo.uvcontsub.uvfits'  
datacolumn='data'
inp
go
</pre>


<source lang="python">
<source lang="python">
exportuvfits(vis='ngc5921.demo.src.split.ms.contsub', fitsfile='ngc5921.demo.contsub.uvfits', datacolumn='corrected', multisource=True)
#Pseudo-interactive python
exportuvfits(vis='ngc5921.demo.uvcontsub.ms', fitsfile='ngc5921.demo.uvcontsub.uvfits', datacolumn='data')
</source>
</source>


<!--
Note: the default is to export the CORRECTED_DATA column. If we wanted to export the full data-set after applying the calibration this would be appropriate, but uvcontsub writes out to the DATA column into a new measurement set.
default('exportuvfits')
srcuvfits = prefix + '.contsub.uvfits' # recall: prefix = 'ngc5921.demo'
vis = splitms + '.contsub'
fitsfile = srcuvfits
datacolumn = 'corrected'
multisource = True
async = True
myhandle = exportuvfits()
-->


And now, the FITS cube.
And for the cleaned cube:
<source lang="python">
exportfits(imagename='ngc5921.demo.tclean.image', fitsimage='ngc5921.demo.tclean.fits')
</source>


<!--
<pre style="background-color: #d8bfd8;">
default('exportfits')
#Interactive python
clnfits = prefix + '.cleanimg.fits'
default exportfits
imagename = clnimage
inp
fitsimage = clnfits
imagename='ngc5921.demo.clean.image'
async = True
fitsimage='ngc5921.demo.clean.fits'
saveinputs('exportfits',prefix+'.exportfits.saved')
velocity=True
myhandle2 = exportfits()
optical=True
-->
inp
go
</pre>


The moment maps (or any CASA images) can be similarly exported using {{exportfits}}.
In this example, we have chosen to write the FITS cube with velocity rather than frequency on the spectral axis and to use the optical (''cz'') convention for velocity. Both of these are, of course, optional.


<source lang="python">
#Pseudo-interactive python
exportfits(imagename='ngc5921.demo.clean.image', fitsimage='ngc5921.demo.clean.fits')
</source>


The moment maps (or any other CASA images) can be similarly exported using exportfits.


== Appendix: Python Notes ==
== Appendix: Python Notes ==
Line 1,626: Line 1,600:
[[Pre-upgrade VLA Tutorials | &#8629; '''Pre-upgrade VLA Tutorials''']]
[[Pre-upgrade VLA Tutorials | &#8629; '''Pre-upgrade VLA Tutorials''']]


{{Checked 5.7.2}}
<div style="background-color: #CCFF99;">
Last checked on CASA Version 6.5.2.
</div>

Latest revision as of 00:51, 1 February 2023

Disclaimer: Due to continuous CASA software updates, GUI images may look different on more recent versions than those shown here.

This guide is meant to be used with monolithic CASA and not pip-wheel, because the GUIs are not necessarily validated.

We would like to note that the CASAviewer has not been maintained for a few years anymore and will be removed from future versions of CASA.
The NRAO replacement visualization tool for images and cubes is CARTA, the “Cube Analysis and Rendering Tool for Astronomy”. It is available from the CARTA website. We strongly recommend using CARTA, as it provides a much more efficient, stable, and feature rich user experience. A comparison of the CASAviewer and CARTA, as well as instructions on how to use CARTA at NRAO is provided in the relevant section of CASA docs. This tutorial shows figures generated with CARTA for visualization.

Last checked on CASA Version 6.5.2.

Overview

The technique used to calibrate and image continuum datasets generally applies to spectral line observations, except that an additional calibration step is required. Bandpass calibration flattens the spectral response of the observations, ensuring that spectral channel images are properly calibrated in amplitude and phase.

The following tutorial derives from an annotated script originally provided in the CASA Cookbook.

DATA: The data are included with the CASA installation.

Setting up the CASA environment

Start up CASA in the directory you want to use. 

# in bash
mkdir NGC5921
cd NGC5921
casa

We'll use a python os command to get the appropriate CASA path for your installation in order to import the data. The use of os.environ.get is explained in the Appendix. This is not part of the data reduction, just an initial step to find where the example dataset has been stored when CASA was installed – you will not normally need to do this if you are working on your own data. 

import os
pathname=os.environ.get('CASAPATH').split()[0]
fitsdata=pathname+'/data/demo/NGC5921.fits'

You can see the value of the variable fitsdata, which is the path to the fits file, using the python print function: 

 
print(fitsdata)

To help clean up the bookkeeping and further avoid issues of write privileges, remove any prior versions of the measurement set and calibration tables. This should be done with the rmtables task, either interactively or using rmtables('table_name'), in preference to the operating system rm -rf command, as rmtables also clears data in the CASA cache.

Import the data

The next step is to import the multisource UVFITS data to a CASA measurement set via the importuvfits task. This task is used to read in data UVFITS data from the legacy VLA or other telescope; for reading in EVLA data in ASDM format the task importasdm would be used.

Note that you can set each parameter for any particular task one-by-one ('interactive CASA', or you can supply the task and input parameters with a single command ('pseudo-interactive CASA'). 

# Interactive CASA
default importuvfits
inp
fitsfile = fitsdata
vis = 'ngc5921.demo.ms'
antnamescheme = 'new'
inp
saveinputs('importuvfits', 'ngc5921.demo.importuvfits.saved') #optional
go 

# Pseudo-interactive CASA
importuvfits(fitsfile=fitsdata,vis="ngc5921.demo.ms")

Where:
    default importuvfits     # loads importuvfits with the default parameters
    inp                      # lists the inputs available for this task
    fitsfile='filename.fits' # sets the filename of the fits file to use
    antnamescheme='new'      # uses antenna names of the form VANN rather than NN
    vis='filename.ms'        # sets the name of the output measurement set created (.ms)
    go                       # executes the task with the given inputs

A few things to note:

  • The first inp reveals three parameters with defaults fitsfile=' '; vis=' '; antnamescheme='old'.
  • fitsfile=fitsdata sets the value of fitsfile to the fitsdata string variable defined earlier. If you were using your own dataset, you could enter it directly as a string (e.g., fitsfile='mydata.fits') or define it as a variable before setting fitsfile (e.g. fitsdata='mydata.fits', then fitsfile=fitsdata). You should avoid using 'fitsfile' as a variable name, as this will be overwritten by 'default importuvfits' or 'tget importuvfits'.
  • The second inp shows that the string variable fitsdata, defined earlier, has been expanded. A valid entry shows in blue, while an invalid entry shows in red. Default entries (as for antnamescheme in the initial listing of inputs) show in black.

Inspecting the data

The next step is to inspect to measurement set using the listobs task. This provides almost all relevant observational parameters – to the extent that the exist in the dataset – such as correlator setup (frequencies, bandwidths, channel number and widths, polarization products), sources, scans, scan intents, and antenna locations. Setting verbose=True (the default, so not included in the commands below) will display all of the contents of the raw data and setting listfile='listobs.txt' will create a text file you can refer to later (if this is not set, the output will instead display in the CASA Logger). Some of the parameters (such as scan intents) are not available for legacy VLA data such as this, so are left blank in the output. 

# Interactive CASA
default listobs
inp
vis='ngc5921.demo.ms'
listfile='listobs.txt'
inp
go

listobs(vis='ngc5921.demo.ms', listfile='listobs.txt')

You will get a summary, not well formatted for human readability, in the CASA terminal. It is best to ignore this and look at the output text file, which has more information and is better formatted. This looks like: 

================================================================================
           MeasurementSet Name:  <path to directory>/ngc5921.demo.ms      MS Version 2
================================================================================
   Observer: TEST     Project:   
Observation: VLA
Data records: 22653       Total elapsed time = 5310 seconds
   Observed from   13-Apr-1995/09:18:45.0   to   13-Apr-1995/10:47:15.0 (TAI)

   ObservationID = 0         ArrayID = 0
  Date        Timerange (TAI)          Scan  FldId FieldName             nRows     SpwIds   Average Interval(s)    ScanIntent
  13-Apr-1995/09:18:45.0 - 09:24:45.0     1      0 1331+30500002_0           4509  [0]  [30] 
              09:27:15.0 - 09:29:45.0     2      1 1445+09900002_0           1890  [0]  [30] 
              09:32:45.0 - 09:48:15.0     3      2 N5921_2                   6048  [0]  [30] 
              09:50:15.0 - 09:51:15.0     4      1 1445+09900002_0            756  [0]  [30] 
              10:21:45.0 - 10:23:15.0     5      1 1445+09900002_0           1134  [0]  [30] 
              10:25:45.0 - 10:43:15.0     6      2 N5921_2                   6804  [0]  [30] 
              10:45:15.0 - 10:47:15.0     7      1 1445+09900002_0           1512  [0]  [30] 
           (nRows = Total number of rows per scan) 
Fields: 3
  ID   Code Name                RA               Decl           Epoch   SrcId      nRows
  0         1331+30500002_0     13:31:08.287300 +30.30.32.95900 J2000   0           4509
  1         1445+09900002_0     14:45:16.465600 +09.58.36.07300 J2000   1           5292
  2         N5921_2             15:22:00.000000 +05.04.00.00000 J2000   2          12852
Spectral Windows:  (1 unique spectral windows and 1 unique polarization setups)
  SpwID  Name   #Chans   Frame   Ch0(MHz)  ChanWid(kHz)  TotBW(kHz) CtrFreq(MHz)  Corrs  
  0      none      63   LSRK    1412.665        24.414      1550.2   1413.4219   RR  LL
Sources: 3
  ID   Name                SpwId RestFreq(MHz)  SysVel(km/s) 
  0    1331+30500002_0     0     1420.405752    0            
  1    1445+09900002_0     0     1420.405752    0            
  2    N5921_2             0     1420.405752    0            
Antennas: 27:
  ID   Name  Station   Diam.    Long.         Lat.                Offset from array center (m)                ITRF Geocentric coordinates (m)        
                                                                     East         North     Elevation               x               y               z
  0    VA01  VLA:N7    25.0 m   -107.37.07.2  +33.54.12.9        -30.2623      345.7477       -0.8872 -1601155.613187 -5041783.882304  3555162.343090
  1    VA02  VLA:W1    25.0 m   -107.37.05.9  +33.54.00.5          3.5004      -39.7725        0.9883 -1601188.991307 -5042000.530918  3554843.409670
  2    VA03  VLA:W2    25.0 m   -107.37.07.4  +33.54.00.9        -37.1358      -25.0262        1.0383 -1601225.244615 -5041980.431775  3554855.677111
  3    VA04  VLA:E1    25.0 m   -107.37.05.7  +33.53.59.2          6.9833      -79.6414        1.1565 -1601192.444530 -5042022.911771  3554810.411780
  4    VA05  VLA:E3    25.0 m   -107.37.02.8  +33.54.00.5         81.5188      -37.9632        1.0246 -1601114.335629 -5042023.211477  3554844.931655
  5    VA06  VLA:E9    25.0 m   -107.36.45.1  +33.53.53.6        536.8977     -250.3175        0.1183 -1600715.915813 -5042273.186780  3554668.167811
  6    VA07  VLA:E6    25.0 m   -107.36.55.6  +33.53.57.7        267.7566     -124.8145        1.2815 -1600951.554888 -5042125.947753  3554772.987072
  7    VA08  VLA:W8    25.0 m   -107.37.21.6  +33.53.53.0       -401.2640     -270.6305        2.2293 -1601614.059494 -5042001.699973  3554652.484758
  8    VA09  VLA:N5    25.0 m   -107.37.06.7  +33.54.08.0        -16.9948      194.1215       -0.1368 -1601168.756077 -5041869.099542  3555036.914367
  9    VA10  VLA:W3    25.0 m   -107.37.08.9  +33.54.00.1        -74.4964      -50.1921        1.1608 -1601265.132224 -5041982.597979  3554834.857504
  10   VA11  VLA:N4    25.0 m   -107.37.06.5  +33.54.06.1        -11.7487      134.3686        0.1774 -1601173.922897 -5041902.701204  3554987.495105
  11   VA12  VLA:W5    25.0 m   -107.37.13.0  +33.53.57.8       -179.2554     -120.8635        1.4872 -1601376.990711 -5041988.712764  3554776.381187
  12   VA13  VLA:N3    25.0 m   -107.37.06.3  +33.54.04.8         -8.2438       94.5297        0.3947 -1601177.362708 -5041925.112425  3554954.550128
  13   VA14  VLA:N1    25.0 m   -107.37.06.0  +33.54.01.8         -0.0030        0.0445        0.8773 -1601185.580779 -5041978.216463  3554876.396287
  14   VA15  VLA:N2    25.0 m   -107.37.06.2  +33.54.03.5         -4.7904       54.7090        0.5774 -1601180.839839 -5041947.470902  3554921.600805
  15   VA16  VLA:E7    25.0 m   -107.36.52.4  +33.53.56.5        348.8969     -162.6653        1.0336 -1600880.544215 -5042170.427468  3554741.431900
  16   VA17  VLA:E8    25.0 m   -107.36.48.9  +33.53.55.1        438.6654     -204.5038        0.5027 -1600801.910482 -5042219.412805  3554706.408864
  17   VA18  VLA:W4    25.0 m   -107.37.10.8  +33.53.59.1       -122.0163      -82.2819        1.2624 -1601315.866196 -5041985.352573  3554808.279150
  18   VA19  VLA:E5    25.0 m   -107.36.58.4  +33.53.58.8        195.8349      -91.2758        1.2155 -1601014.427180 -5042086.300814  3554800.787928
  19   VA20  VLA:W9    25.0 m   -107.37.25.1  +33.53.51.0       -491.1000     -331.2429        2.5539 -1601709.998072 -5042006.975455  3554602.355417
  20   VA21  VLA:W6    25.0 m   -107.37.15.6  +33.53.56.4       -244.9704     -165.2178        1.6861 -1601447.161927 -5041992.554228  3554739.677219
  21   VA22  VLA:E4    25.0 m   -107.37.00.8  +33.53.59.7        133.6478      -62.2829        1.0919 -1601068.773396 -5042051.970054  3554824.783566
  23   VA24  VLA:E2    25.0 m   -107.37.04.4  +33.54.01.1         40.6649      -18.9151        0.9550 -1601150.040469 -5042000.665669  3554860.702914
  24   VA25  VLA:N6    25.0 m   -107.37.06.9  +33.54.10.3        -23.2197      265.3902       -0.4819 -1601162.569974 -5041829.054708  3555095.873969
  25   VA26  VLA:N9    25.0 m   -107.37.07.8  +33.54.19.0        -46.5533      532.1581       -1.8550 -1601139.422904 -5041679.082136  3555316.518142
  26   VA27  VLA:N8    25.0 m   -107.37.07.5  +33.54.15.8        -38.0437      434.7201       -1.3387 -1601147.894127 -5041733.868915  3555235.935926
  27   VA28  VLA:W7    25.0 m   -107.37.18.4  +33.53.54.8       -319.1171     -215.2368        1.9407 -1601526.340031 -5041996.897001  3554698.302182

Key information from listobs

The output of listobs is dense with information, but some facts to note are (working down the file):

  • The observations were taken on 13 April 1995 between 09:18:45 and 10:47:15
  • In the list of scans we can see that:
    • There is a gap between 09:51:15 and 10:21:45 when the array was making other observations that are not included in this demo dataset
    • The averaging interval for all of the scans is 30s
  • There are three fields listed under "Fields": 1331+305*, 1445+099* and N5921_2.
    • As this is legacy VLA data, no scan intents are given. However, we can identify 1331+305 (field=0_ as 3C286, the flux and bandpass calibrator, 1445+099 (field=1) as the phase calibrator, and N5921_2 (field=2) as the science target.
  • A single spectral window (IF) is listed under "Spectral Windows", with SpwID = 0.
    • This is divided into 63 channels of 24.414 kHz width, centered on 1413.4219 MHz.
    • The correlations are RR and LL (cross-pols are absent).
  • The three sources listed under "Sources" correspond to the three fields under "Fields", but different information is given linking them to the spectral window(s).
    • All sources are associated with SpwID = 0 (if there were multiple spectral windows, there would be a line for each spectral window, repeating sources observed in multiple windows)
    • The rest frequency is set to the HI frequency and the systemic velocity to 0 km/s – although the center frequency above is clearly not at 0 km/s, the systemic velocity field is not correctly populated in this legacy dataset.

Log files

EVLA and VLA logs from October 2013 can be accessed via the operator logs] tool. For earlier observations, such as these, the older VLA operator logs page gives logs by month from January 1989. This is a single, large text file for each month and it is necessary to search through to find the relevant observation. For this observation, we find: 

************************************************************************
Program:       TEST/VANMOORSEL
Observer:      G. van Moorsel
Date:          Thursday, Apr 13 1995
User Number:   1102
Source File:   528MTST             Subarray:  #1
Observe Mode:  Line                Operator:  T. Perreault

** Weather Information **
Time             Dew Point Temp.   Wind           Bar. Pressure Remarks:
95Apr13 08:49:59 -13.3°C   1.1°C   W @ 1 m/s      794.6mbars    The sky is clear.
95Apr13 10:30:39 -10.9°C   3.3°C   NNW @ 1 m/s    794.1mbars    The sky is clear.

** Visibility Tape Information **
Tape #                 File #                  Time of Final Record:
N6078                   1                      

** Monitor Tape Information **
Tape #                 File #                  Time of Final Record:
N6080                   3                      

Antenna(s) Used:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 

** Operator Comments **

Start Time         End Time            Form #      Ant #         Downtime
95Apr13 08:46:40                                                 (in Minutes)
Start of observe file. The band(s) used is(are) L   band(s).

Start Time         End Time            Form #      Ant #         Downtime
95Apr13 08:50:00                                                 
On source 1331+305 with all available antennas. 

Start Time         End Time            Form #      Ant #         Downtime
95Apr13 09:50:02                                                 
The test e-mail message from the computer Zia was received. Observe
mail should work fine.
End of program TEST/VANMOORSEL.  Total Downtime = 0.0 minutes (0.0% of total time).


AsciiFileOut Version: 1.00 -- Version Date: March 31, 1995
******************************************

From this we can see that there are no obvious problems – antenna faults or the like – affecting these observations.

Antenna positions

Plotants output. Click to enlarge.

The antenna positions are given in the output from listobs, but a graphical display can be easier to understand and aid in selecting a good reference antenna. This can be plotted using the plotants task. 

# Interactive CASA
default plotants
inp
vis='ngc5921.demo.ms'
inp
go

# Psuedo-interactive CASA
plotants(vis='ngc5921.demo.ms')

Where:
    vis='filename.ms'.       # sets the name of the input measurement set
Optional parameters:
    logpos=True              # plots the distance from the center of the array logarithmically
    figfile='antlayout.png'  # saves the plot to the specified file

Flagging

The next step is to flag the data, for which we use the task flagdata. Flagging is a large topic, so for more details see the VLA CASA Flagging Topical CASA Guide.

Flag the autocorrelations

First, we can flag the autocorrelation data, which are not needed for our reduction: 

# Interactive CASA
default flagdata
inp
vis='ngc5921.demo.ms'
autocorr=True
inp
go

# Psuedo-interactive CASA
flagdata(vis="ngc5921.demo.ms", autocorr=True)

CASA issues a warning when running this command, as it is having to make assumptions about the data due to information not being available in legacy VLA files. This can be safely ignored.

If you run this in interactive mode, you will see that there are a lot of options for this task. We're going to use many of them later, but for now we just use vis to set the input measurement set and autocorr=True to say that we want to flag the autocorrelations. One parameter to check is flagbackup=True (which should be set by default). This backs up the flag state before carrying out the requested operation, allowing you to roll back to an earlier state using flagmanager. It is good practice when flagging to note which flagbackup version is associated with which flagging commands in your data reduction log.

Quack flagging

It is common for the array to require a small amount of time to settle down at the start of a scan. Consequently, it has become standard practice to flag the initial samples from the start of each scan. This is known as 'quack' flagging. This has been implemented in flagdata.

As we've already used flagdata, we could start where we were before using 'tget flagdata' rather than 'default flagdata' to restore the last parameters used. This would avoid having to re-enter the vis= command, but at the cost of having to check parameters used before and reset them to the defaults, such as setting autocorr=False. It is safer to return to the defaults by using 'default flagdata', which is what we do here. 

# Interactive CASA
default flagdata
inp
vis='ngc5921.demo.ms'
mode='quack'
quackinterval = 10.0
inp
go

# Psuedo-interactive CASA
flagdata(vis="ngc5921.demo.ms", mode='quack', quackinterval='10.0')

If you type 'inp' after setting mode='quack', you will see that additional inputs for this mode have appeared. These allow you to set the quackinterval, here set to 10s (any time less than the averaging interval of the data – 30s as we noted from the listobs output – will select just the first sample); we leave quackmode='beg' at its default value to flag the beginning of each scan. Taken together, these parameters tell flagdata to flag the first sample at the beginning of each scan.

Interactive flagging

We use plotms to inspect the spectral line data. While plotms allows flagging inside the graphical interface, this does not write flagbackup files; we can use plotms to visualize the data in conjunction with using flagdata to actually set the flags in order to have flagbackup files.

To start plotms, you can simply run 

plotms

at the CASA terminal prompt, and set the parameters interactively in the graphical interface. This will take any relevant parameters from the current parameter set, which can lead to some unexpected behavior (e.g., if started after flagging a data selection in flagdata, plotms will start using the same data selection and will report that all the data is flagged – if this happens, simply edit the data selection parameters in the graphical interface and reload the data). Alternatively, you can load it as a CASA task and set the parameters to be used on initial load using interactive of pseudo-interactive CASA.

To start, look at the bandpass of 3C286 to see whether there is any narrow-band RFI and to see which channels look useful. We use 3C286 for this as it has higher flux, and therefore higher signal to noise, than the other sources: 

# Interactive CASA
default plotms
inp
vis='ngc5921.demo.ms'
xaxis='channel'
yaxis='amp'
field='0'
correlation='RR,LL'
coloraxis='baseline'
datacolumn='data'
inp
go

#Pseudo-interactive CASA
plotms(vis='ngc5921.demo.ms', xaxis='channel', yaxis='amp', field=0, correlation='RR,LL', coloraxis='baseline', datacolumn='data')

If we want to increase the signal-to-noise, or look for fainter RFI signals, we can use avgtime='360' to average across all of the samples on 3C286. If using CASA interactively, you can change this averaging using: 

avgtime='360'
go

Alternatively, this can be changed in the plotms GUI.

Amplitude vs channel shown in plotms. Click to enlarge.

The resulting plot (see figure) shows that there is good signal on channels 6 to 56, which we can specify using spw='0:6~56'. There does not appear to be any visible RFI on this field; before moving on it's worth checking the other fields for RFI as well. This can be done from the GUI or using: 

field='N' 
go

(Where 'N' is either '1' or '2' for the phase calibrator and the target fields respectively.)

To check for antenna-based effects, we next want to look at the summed amplitude across the 51 channels identified above. We can do this on the graphical interface or using: 

avgtime=''
spw='0:6~56'
avgchannel='51'
field=''
xaxis='time'
inp
go

Note that here we use avgtime=' ' to unset the time averaging we set previously and field=' ' to unset the field specifier and show all fields. In pseudo-interactive CASA, we don't need to unset the time averaging but we do need to specify all non-defaults every time we run: 

#Pseudo-interactive CASA
plotms(vis='ngc5921.demo.ms', xaxis='time', yaxis='amp', spw='0:6~56', avgchannel='51', correlation='RR,LL', coloraxis='baseline', datacolumn='data')

This plots amplitude against time (see figure). We can see from the colored striping on the sources that different baselines (coloraxis='baseline' means the different colors represent different baselines) have slightly different amplitudes, including one baseline (pink on the example plot) that is always high.

Amplitude vs time plotted with plotms. Click to enlarge.

We can draw a box around some of those pink points in plotms by clicking the mark regions tool to select that function and then drawing a box on the screen to mark a region. This may take a few seconds to return, but eventually the box will be filled with dots showing it has been selected. The points within the marked region can then be inspected using the locate tool to the right of the region buttons. This outputs information on the selected points to the CASA logger. Once you are finished with a marked region, you should clear it with the clear regions tool (attempting to change the plot while a marked region is present will often crash plotms).

On the logger output, the baseline with the high values is identified with "BL=VA12@VLA:W5 & VA21@VLA:W6 [11&20]". This tells us that it is the baselines between antennas VA12 and VA21 at stations VLA:W5 and VLA:W6 with IDs 11 and 20. We can also see that all of the points have "Corr=LL", telling us that it is just the left-hand correlation.

We can plot just this baseline by setting antenna to "VA12&VA21" (or "VLA:W5&VLA:W6") in the GUI or, in interactive CASA: 

antenna='VA12&VA21' 
go

(Note that 'VA12,VA21' would select all baselines from antennas VA12 and VA21, not just the baseline between the two antennas – this is particularly important when flagging using flagdata!)

It can be seen that although the data is slightly high on the LL correlation of this baseline, it isn't particularly noisy. We have not yet calibrated this data, so some variation is possible. It does not look like this is a bad baseline/correlation, but rather that this will be dealt with by calibration.

Flagging data:

Plotms settings for flagging spectral line data. Click to enlarge.

If we did want to flag this data, we could either do so within plotms using the flag tool or we could use flagdata again. If flagging baselines within plotms, you should ensure that you flag all of the channels; to do this, under the Flag tab, specify Extend flags to Channel (obviously, if flagging RFI channels you should not to this). You can read more in the tutorial on data flagging with plotms. However, if you want flag backups to be created (which is a good idea), you need to flag using flagdata rather than plotms. This can be done using:

Do not type 'go' at the end of this script! 'go' has not been included as we're not going to run this as we don't want to actually flag the data. 

# Interactive CASA
default flagdata
inp
vis='ngc5921.demo.ms'
antenna = 'VA12&VA21'
correlation = 'LL'
inp

If executed, this would flag the left-hand correlation of the baseline between antennas VA12 and VA21. Other fields displayed by 'inp' in the section under "mode = 'manual'" can be used to set other data selection parameters, such as spw and timerange, so you can select the data to be flagged. If you control plotms from the GUI, you can identify data to be flagged using the mark regions and locate tools and then enter the appropriate parameters into flagdata to flag that data; when running like this you can use 'plotms' at the command line to restart it if it crashes, but while flagdata is the active task 'go' will execute flagdata rather than starting plotms.

Calibration

Calibration of spectral line data broadly follows the approach for continuum data, except that the amplitude and phase corrections are a function of frequency and so must be corrected by bandpass calibration. The basic calibration steps follow.

  • Set the flux scale of the primary calibrator, here, 1331+305 = 3C 286.
  • A priori calibration
  • Determine bandpass corrections based on the primary calibrator. In the script that follows, the bandpass calibration will be stored in bandpass.cal.
  • Inspect the bandpass calibration for problems and to determine viable channels for averaging and imaging. We want to toss out end channels where the response is poor.
  • Determine the gain calibrations on the bandpass-corrected and channel-averaged data. In this step, we effectively turn the spectral line data into a single-channel continuum data set and calibrate accordingly. The calibration is first stored in apcal.gcal. In the second part of this step we correct the fluxscale of the apcal table, and store the final calibration solutions with correct fluxes in fluxscale.cal (this is the table that needs to be applied later to the data, not the apcal.gcal version).
  • Inspect the gain calibration solutions to look for any aberrant solutions that hint at bad calibrator data.
  • Apply the calibration solutions to the source (N5921_2). This action literally adds a new column of data to the measurement set. This new column contains the data with the gain calibration and bandpass calibration applied, but it does not overwrite the raw data in case the calibration needs revision.

Setting the flux scale

The setjy task generates a source model for the primary calibrator, 1331+305 = 3C286. From CASA 5.3 onwards, the default standard is Perley-Butler 2017 and includes resolved structure of the calibrators. This is 1.4GHz D-config and 1331+305 is sufficiently unresolved that, in principle, we don't need a model image; however, here we proceed with applying the detailed model, as a good practice. Setjy also looks up the radio SED for common flux calibrators and automatically assigns the total flux density.

We can first get a listing of the available models. Setjy will look within the CASA working directory for files matching *.im* and *.mod*, i.e. user-defined images or models, and in the CalModels directory of the installation. Here we will want to apply a model from CalModels but, in principle, it is possible to use a user-defined model instead. 

# Interactive CASA
default setjy
inp
vis='ngc5921.demo.ms'
listmodels=True
inp
go

# Psuedo-interactive CASA
setjy(vis='ngc5921.demo.ms',listmodels=True)

This gives output in both the terminal and the logger for both the working directory and the CalModels directory. 

#Logger output:
Candidate models (*.im* *.mod*) in .:
#Terminal output:
ls: cannot access *.mod*: No such file or directory
ngc5921.demo.importuvfits.saved

This is the output for the current directory. As the listmodels setting uses the linux command 'ls' to look for files matching *.im* and *.mod*, it has found the ngc5921.demo.importuvfits.saved file created earlier. If you didn't create this file, you would instead get just in the logger window: 

#Logger output:
No candidate models matching '*.im* *.mod*' found in .  # The single period here refers to the current working directory.

With no associated output in the terminal window. The output for the CalModels directory follows immediately after this: 

#Logger output:
Candidate models (*) in /home/casa/data/distro/nrao/VLA/CalModels:

#terminal output:
3C123_P.im  3C138_S.im  3C147_P.im  3C286_C.im  3C286_X.im  3C48_P.im
3C138_A.im  3C138_U.im  3C147_Q.im  3C286_K.im  3C295_P.im  3C48_Q.im
3C138_C.im  3C138_X.im  3C147_S.im  3C286_L.im  3C380_P.im  3C48_S.im
3C138_K.im  3C147_A.im  3C147_U.im  3C286_P.im  3C48_A.im   3C48_U.im
3C138_L.im  3C147_C.im  3C147_X.im  3C286_Q.im  3C48_C.im   3C48_X.im
3C138_P.im  3C147_K.im  3C196_P.im  3C286_S.im  3C48_K.im   README
3C138_Q.im  3C147_L.im  3C286_A.im  3C286_U.im  3C48_L.im

From this, we can use the name of our flux calibrator source (3C286) and band (L) and identify the model we want as 3C286_L.im. Note that short codes are used for some bands – A for Ka and U for Ku – and that models are available for additional flux calibrators at P band. We use field='0' to identify the field in our dataset corresponding to 3C286; alternatively we could use the source name and set field='1331+305*' (the wildcard being necessary as there's a string of zeroes after 1331+305 in the source name). 

# Interactive CASA
default setjy
inp
vis='ngc5921.demo.ms'
field='0'
model='3C286_L.im'
usescratch=True
inp
go

# Pseudo-interactive CASA
setjy(vis='ngc5921.demo.ms', field='0', model='3C286_L.im', usescratch=True)

Where:
    vis='ngc5921.demo.ms' # defines the name the of dataset
    field='0'             # defines the field to be used; field 0 = 3C286
    model='3C286_L.im'    # defines the model to be used, here 3C286 and L-band
    usescratch=True       # tells CASA to use the MODEL_DATA column

A summary of the operation is sent to the logger window. Here's a listing of the output. 

2022-12-02 00:32:41 INFO setjy	##########################################
2022-12-02 00:32:41 INFO setjy	##### Begin Task: setjy              #####
2022-12-02 00:32:41 INFO setjy	setjy( vis='ngc5921.demo.ms', field='0', spw='', selectdata=False, timerange='', scan='', intent='', observation='', scalebychan=True, standard='Perley-Butler 2017', model='3C286_L.im', listmodels=False, fluxdensity=-1, spix=0.0, reffreq='1GHz', polindex=[], polangle=[], rotmeas=0.0, fluxdict={}, useephemdir=False, interpolation='nearest', usescratch=False, ismms=False )
2022-12-02 00:32:44 INFO setjy	{'field': '0'}
2022-12-02 00:32:45 INFO Imager	Opening MeasurementSet <path to directory>/ngc5921.demo.ms
2022-12-02 00:32:45 INFO setjy	Using /home/casa/data/distro/nrao/VLA/CalModels/3C286_L.im for model.
2022-12-02 00:32:45 INFO imager	Using channel dependent flux densities
2022-12-02 00:32:45 INFO imager	Selected 4509 out of 22653 rows.
2022-12-02 00:32:45 INFO imager	1331+30500002_0 (fld ind 0) spw 0  [I=15.016, Q=0, U=0, V=0] Jy @ 1.4127e+09Hz, (Perley-Butler 2017)
2022-12-02 00:32:46 INFO imager	Using model image /home/casa/data/distro/nrao/VLA/CalModels/3C286_L.im
2022-12-02 00:32:46 INFO imager	Scaling spw(s) [0]'s model image by channel to  I = 15.0159, 15.0118, 15.0077 Jy @(1.41265e+09, 1.41343e+09, 1.41419e+09)Hz (LSRK) for visibility prediction (a few representative values are shown).
2022-12-02 00:32:46 INFO imager	The model image's reference pixel is 0.00904522 arcsec from 1331+30500002_0's phase center.
2022-12-02 00:32:46 INFO imager	Will clear any existing model with matching field=1331+30500002_0 and spw=*
2022-12-02 00:32:46 INFO  	Clearing model records in MS header for selected fields.
2022-12-02 00:32:46 INFO  	 1331+30500002_0 (id = 0) not found.
2022-12-02 00:32:46 INFO imager	Selected 4509 out of 22653 rows.
2022-12-02 00:32:46 INFO setjy	Task setjy complete. Start time: 2022-12-01 17:32:41.433462 End time: 2022-12-01 17:32:46.302627
2022-12-02 00:32:46 INFO setjy	##### End Task: setjy                #####
2022-12-02 00:32:46 INFO setjy	##########################################

An important piece of information from this is that the flux of 3C286 was set to a bit over 15 Jy, with some slight variation across the frequency range of the data cube, and the data cube was scaled by channel to match this.

A priori calibration

The gencal task carries out general calibrations using information that is known prior to inspecting the data, and thus known as a priori calibration. We can use it to apply the antenna gain curve and (if necessary) correct the antenna positions.

Antenna gain-elevation curve calibration

With elevation, the effective collecting area and surface accuracy of antennas varies as gravity tugs at the surface of the non-rigid antenna. This calibration is only strictly necessary at high frequencies (> 15 GHz), so can be skipped if desired. Using gencal, we will write the gain curve solutions to a calibration table. 

# Interactive CASA
default gencal
inp
vis='ngc5921.demo.ms'
caltable='antgain.cal'
caltype='gc'
inp
go

# Psuedo-interactive CASA
gencal(vis='ngc5921.demo.ms',caltable='antgain.cal',caltype='gc')

Where:
    vis='ngc5921.demo.ms'  # the measurement set
    caltable='antgain.cal' # name of output calibration table where values are stored
    caltype='gc'           # calculate the gain curve


Antenna position corrections

Unlike the EVLA, where antenna position offsets can be looked up automatically and applied by gencal using caltype='antpos', you need to look up and apply these corrections manually for the legacy VLA. If needed, and if we have the necessary information, we can correct the antenna positions using gencal with caltype='antposvla'. This takes the offsets to be applied (dBx, dBy, dBz) in meters for a specified antenna. Please see the gencal documentation for further information.

Bandpass calibration

The flux calibrator 1331+305 = 3C 286 now has a model assigned to it from the setjy step. Since the bandwidth of our observations is only 1.55 MHz, the model doesn't change over this narrow range of frequencies, so we can use it to determine amplitude and phase (gain) corrections for each channel independently. The result is the bandpass calibration.

As for any antenna-based calibration scheme, we have to pick an antenna to act as the reference point for the calibration. Any antenna will do, but it's better to pick one near the center of the array, avoiding any that suffered from shadowing or had to be flagged for any other reason. For the remainder of the calibration, we will use refant = 'VA15' (the antenna in position N2). We can first do the bandpass on the single 5min scan on 1331+305. At 1.4GHz phase stablility should be sufficient to do this without a first (rough) gain calibration. This will give us the relative antenna gain as a function of frequency. 

# Interactive CASA
default bandpass
inp
vis='ngc5921.demo.ms'
caltable='bandpass.cal'
field='0'
solint='inf'
combine='scan'
refant='VA15'
bandtype='B'
gaintable='antgain.cal' # ONLY IF YOU CREATED THIS WITH GENCAL EARLIER
inp
go

# Pseudo-interactive CASA
bandpass(vis='ngc5921.demo.ms', caltable='bandpass.cal', field='0', solint='inf', combine='scan', refant='VA15', bandtype='B', gaintable='antgain.cal')

Where:
    vis='ngc5921.demo.ms'.  # Input measurement set
    caltable='bandpass.cal' # Output calibration table
    field='0'        # Use the flux calibrator 1331+305 = 3C286 (FIELD_ID 0) as bandpass calibrator
    bandtype='B'.    # Choose bandpass solution type. Pick standard time-binned B (rather than BPOLY) [default]
    solint='inf'     # Set solution interval arbitrarily long (to get single bandpass) [default]
    combine='scan'   # Combine scans (but break at obs, field and spw boundaries) [default]
    refant = 'VA15'  # Set antenna VA15 (VLA:N2) as the reference antenna
    gaintable='antgain.cal' # Use the antgain.cal table created by gencal (only if you did this optional step)

Inspect the bandpass response curve

In the gain calibration to follow, we will effectively convert the spectral line data into a continuum data set. Before proceeding, we need to inspect the bandpass calibration to make sure that it contains no bad values and also to inspect which channels to average to produce the continuum data.

We will plot the bandpass solutions as amplitude vs channel and phase vs channel per antenna. Start by looking at the amplitudes. These should be smooth across the channels. You will see the edge channels have lower amplitudes due to the edges of the bandpass being less sensitive. 

# Interactive CASA
default plotms
inp
vis='bandpass.cal'
xaxis='chan'
yaxis='amp'
coloraxis='corr'
iteraxis='antenna'
gridrows=3
gridcols=3
xselfscale=True
yselfscale=True
inp
go

# Psuedo-interactive CASA
plotms(vis='bandpass.cal',xaxis='chan',yaxis='amp',coloraxis='corr',iteraxis='antenna',gridrows=3,gridcols=3,xselfscale=True,yselfscale=True)

Where:
    vis='bandpass.cal'    # the bandpass calibration table
    xaxis='chan'          # plot channels across the x axis
    yaxis='amp'           # plot amplitudes across the y axis
    coloraxis='corr'      # display the two correlations (RR & LL) in different colors
    iteraxis='antenna'    # pages the plots by antenna
    gridrows=3            # places 3 antennas per row
    gridcols=3            # places 3 antennas per column
    xselfscale=True       # create a global xaxis scale for all antennas
    yselfscale=True       # create a global yaxis scale for all antennas
Amplitude vs channel plotted in a 3×3 grid in plotms. Click to enlarge.

This creates a 3×33 grid showing the amplitude on each antenna, with 9 antennas per page. You can scroll through the antennas using the green arrows at the bottom of the plotms GUI. Note that antenna VA23 in position VLA:OUT is displayed blank (it was not in the array at the time) and antenna VA28 is shown on a fourth page. This is not a problem. Looking at the amplitudes confirms our earlier observation that channels 6 to 56 (spw='0:6~56') look good. We will use this spw setting again in the later calibration stages.

You may see the phases vs channel by changing the yaxis to phase interactively, or using the commands below. The phases should be relatively flat and continuous. Note that the phases do wander a bit at the edges of the bandpass where the amplitudes are lower. Some phases (e.g. on antenna VA10) wrap around between -180 and +180 – this is not a real discontinuity. VA15 has a very small variation in phases because it was used as the reference antenna.

Phase vs channel plotted in a 3×3 grid in plotms. Click to enlarge.
# Interactive CASA
yaxis='phase'
inp
go

Note, this follows on from having set the other parameters in interactive CASA as in the previous box, just changing the y-axis to phase. 

# Psuedo-interactive CASA
plotms(vis='bandpass.cal',xaxis='chan',yaxis='phase',coloraxis='corr',iteraxis='antenna',gridrows=3,gridcols=3,xselfscale=True,yselfscale=True)

Gain calibration

From our inspection of the bandpass response curve, we can average channels 6 to 56 to produce continuum-like data for the calibrators. This averaging is specified through the spw (spectral window) parameter in the form spw = '0:6~56'. This specifies the spectral window (IF) to be used as 0 (there is only one spectral window in this measurement set, as seen in the listobs output) and channels 6~56 within that spectral window.

Gain calibrations are otherwise determined as for continuum data.

  • gaincal is run only on the calibrators, 1331+305 (flux calibrator) and 1445+099 (phase calibrator).
  • The default model for gain calibrations is a 1 Jy point source. The flux scale is overridden by setjy, which has been performed for the flux calibrator. We need to transfer that flux scale to the phase calibrator using fluxscale.
  • Note that fluxscale determines the flux density of the phase calibrator and accordingly adjusts its model and calibration solutions. A report of the results are sent to the logger window.
  • Unless you use parameter incremental=True while executing fluxscale (the default is False), the resulting fluxscale.cal table will replace the apcal.gcal table at this point. This is particularly important when it comes to applying the calibration tables to the data in the applycal stage.

Complex gain calibration

First, we will calibrate the amplitude and phases of the data using the flux/bandpass and complex gain calibrators. To do this we will use gaincal and the previously-made calibration tables. This will give us antenna-based solutions that will show variations across time. 

# Interactive CASA
default gaincal
inp
vis='ngc5921.demo.ms'
caltable='apcal.gcal'
field='0,1'
spw='0:6~56'
refant='VA15'
calmode='ap'
solint='inf'
gaintable=['antgain.cal','bandpass.cal']
inp
go

# Psuedo-interactive CASA

gaincal(vis='TDEM0025_HI.ms',caltable='apcal.gcal',field='0,1',spw='0:6~56',refant='VA15',calmode='ap',solint='inf',gaintable=['antgain.cal','bandpass.cal'])

Where:
    vis='ngc5921.demo.ms'                      # the measurement set
    caltable='apcal.gcal'                      # the name you wish to give the calibration table
    field='0,1'                                # the field ids of both calibrators
    refant='VA15'                              # the reference antenna 
    calmode='ap'                               # to find both amplitude and phase solutions
    solint='inf'                               # the solution interval time
    gaintable=['antgain.cal','bandpass.cal']   # existing gain calibration table(s) to apply on the fly

Now look at solutions. First we will look at the phase solutions. These should be at zero with no phase jumps; phase jumps are when the phases change drastically with time. When this happens we are not able to interpolate the phases surrounding that scan that has the phase jump.

Plot of complex gain phase vs time from plotms. Click to enlarge.
# Interactive CASA
default plotms
inp
vis='apcal.gcal'
xaxis='time'
yaxis='phase'
iteraxis='antenna'
coloraxis='corr'
gridrows=3
gridcols=3
plotrange=[0,0,-180,180]
inp
go

# Psuedo-interactive CASA

plotms(vis='apcal.gcal',xaxis='time',yaxis='phase',iteraxis='antenna',gridrows=3,gridcols=3,plotrange=[0,0,-180,180])

Where:
    vis='apcal.gcal'              # the complex gain calibration table
    xaxis='time'                  # plot channels across the x axis
    yaxis='phase'                 # plot amplitudes across the y axis
    iteraxis='antenna'            # pages the plots by antenna
    coloraxis='corr'              # colorizes the plots by correlation (RR and LL)
    gridrows=3                    # places 3 antennas per row
    gridcols=3                    # places 3 antennas per column
    plotrange=[0,0,-180,180]      # sets the plot range

Now look at the amplitudes to see if there are any irregularities there. 

# Interactive CASA
default plotms
inp
vis='apcal.gcal'
xaxis='time'
yaxis='amp'
iteraxis='antenna'
coloraxis='corr'
gridrows=3
gridcols=3
xselfscale=True
yselfscale=True
inp
go

# Psuedo-interactive CASA

plotms(vis='apcal.gcal',xaxis='time',yaxis='amp',iteraxis='antenna',gridrows=3,gridcols=3,xselfscale=True,yselfscale=True)

Where:
    vis='apcal.gcal'         # the complex gain calibration table
    xaxis='time'             # plot channels across the x axis
    yaxis='amp'              # plot amplitudes across the y axis
    iteraxis='antenna'       # pages the plots by antenna
    coloraxis='corr'         # colorizes the plots by correlation (RR and LL)
    gridrows=3               # places 3 antennas per row
    gridcols=3               # places 3 antennas per column
    xselfscale=True          # create a global xaxis scale for all antennas
    yselfscale=True          # create a global yaxis scale for all antennas

Don't worry about the shift in amplitude between the flux calibrator and the phase calibrator; this is because we haven't yet transferred the flux scale to the phase calibrator. What we're looking for here is whether there are large variations on the individual calibrators.

Next we use the gain calibration derived above and the known flux of the flux calibrator to transfer the flux scale to the phase calibrator using the fluxscale task. 

# Interactive CASA
default fluxscale
inp
vis='ngc5921.demo.ms'
caltable='apcal.gcal'
reference='0'
fluxtable='fluxscale.cal'
incremental=False
inp
go

# Psuedo-interactive CASA

fluxscale(vis='ngc5921.demo.ms',caltable='apcal.gcal',reference='0',fluxtable='fluxscale.cal',incremental=False)



Where:
    vis='ngc5921.demo.ms'      # the measurement set
    caltable='apcal.gcal'      # the calibration table with the amplitude and phase corrections
    reference='0'              # the field ID of the reference field (i.e. the flux calibrator)
    fluxtable='fluxscale.cal'  # the name of the output, flux-scaled calibration table
    incremental=False          # create a single fluxscale table with all the gain calibration
                               # ('False' is the default; if you use 'True' you need to supply
                               # both the apcal.gcal and fluxscale.cal tables to applycal below)

The output from fluxscale follows. A relatively large uncertainty for the phase calibrator is a sign that something went wrong, such as having bad solutions in gaincal. Here, the phase calibrator scaled to 2.521 ± 0.002 Jy, which looks reasonable. 

2023-01-17 22:47:15 INFO fluxscale	##########################################
2023-01-17 22:47:15 INFO fluxscale	##### Begin Task: fluxscale          #####
2023-01-17 22:47:15 INFO fluxscale	fluxscale( vis='ngc5921.demo.ms', caltable='apcal.gcal', fluxtable='fluxscale.cal', reference=['0'], transfer=[], listfile='', append=False, refspwmap=[-1], gainthreshold=-1.0, antenna='', timerange='', scan='', incremental=False, fitorder=1, display=False )
2023-01-17 22:47:15 INFO fluxscale	****Using NEW VI2-driven calibrater tool****
2023-01-17 22:47:15 INFO fluxscale	Opening MS: ngc5921.demo.ms for calibration.
2023-01-17 22:47:15 INFO fluxscale	Initializing nominal selection to the whole MS.
2023-01-17 22:47:15 INFO fluxscale	Beginning fluxscale--(MSSelection version)-------
2023-01-17 22:47:16 INFO fluxscale	 Assuming all non-reference fields are transfer fields.
2023-01-17 22:47:16 INFO fluxscale	 Found reference field(s): 1331+30500002_0
2023-01-17 22:47:16 INFO fluxscale	 Found transfer field(s):  1445+09900002_0
2023-01-17 22:47:16 INFO fluxscale	 Flux density for 1445+09900002_0 in SpW=0 (freq=1.41342e+09 Hz) is: 2.52141 +/- 0.00223811 (SNR = 1126.58, N = 54)
2023-01-17 22:47:16 INFO fluxscale	Storing result in fluxscale.cal
2023-01-17 22:47:16 INFO fluxscale	Writing solutions to table: fluxscale.cal
2023-01-17 22:47:16 INFO fluxscale	Task fluxscale complete. Start time: 2023-01-17 15:47:15.041544 End time: 2023-01-17 15:47:16.120049
2023-01-17 22:47:16 INFO fluxscale	##### End Task: fluxscale            #####
2023-01-17 22:47:16 INFO fluxscale	##########################################

Now we can look at the amplitudes again, using the transferred flux scale which should eliminate the differences between the calibrators. This is identical to the previous inspection, but using fluxscale.cal rather than apcal.gcal (so could be run in interactive CASA by retrieving the previous inputs with "tget plotms" then just changing the input table using "vis='fluxscale.cal'"). 

# Interactive CASA
default plotms
inp
vis='fluxscale.cal'
xaxis='time'
yaxis='amp'
iteraxis='antenna'
coloraxis='corr'
gridrows=3
gridcols=3
xselfscale=True
yselfscale=True
inp
go

# Psuedo-interactive CASA

plotms(vis='fluxscale.cal',xaxis='time',yaxis='amp',iteraxis='antenna',gridrows=3,gridcols=3,xselfscale=True,yselfscale=True)

Where:
    vis='fluxscale.cal'      # the complex gain calibration table with the flux scale applied
    xaxis='time'             # plot channels across the x axis
    yaxis='amp'              # plot amplitudes across the y axis
    iteraxis='antenna'       # pages the plots by antenna
    coloraxis='corr'         # colorizes the plots by correlation (RR and LL)
    gridrows=3               # places 3 antennas per row
    gridcols=3               # places 3 antennas per column
    xselfscale=True          # create a global xaxis scale for all antennas
    yselfscale=True          # create a global yaxis scale for all antennas

Apply the solutions

Next, we apply the calibration solutions to the calibrators themselves, and finally transfer the calibration solutions by interpolation (or nearest-neighbor sampling) to the source. The relevant task is applycal, which fills out a new column (CORRECTED_DATA) of calibrated data in the measurement set without replacing the raw data column (DATA). The application is identical to that used for continuum data, except that the bandpass table is also included in the calibration. In order to apply multiple calibrations at once, we provide the gaintable parameter with a list of calibration tables rather than a single entry. If we had run fluxscale with "incremental=True", we would also include the apcal.gcal table here.

First, apply the tables to the flux calibrator: 

# Interactive CASA
default applycal
inp
vis='ngc5921.demo.ms'
field='0'
gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal']
gainfield=['','0','0']
calwt=False
flagbackup=True
inp
go

# Psuedo-interactive CASA
# for the flux/bandpass calibrator (field '0') 
applycal(vis='ngc5921.demo.ms', field='0', 
         gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal'], 
         gainfield=['','0','0'], 
         calwt=False, flagbackup=True)

Where:
    vis='ngc5921.demo.ms'     # the measurement set
    field='0'                 # field id(s) to work on - 0 = the flux calibrator
    gaintable=['antgain.cal''bandpass.cal','fluxscale.cal'] # gain calibration table(s) to apply
    gainfield=['','0','0']    # field id(s) from which each respective gaintable was derived   
    calwt=False               # determines if the weights are calibrated along with the data
    flagbackup=True           # automatically back up the state of flags before the run

Within the gainfield parameter, we do not specify a field for the antgain.cal table since this was derived independently from the calibrator fields. For the calibrators, all bandpass solutions are the same as for the flux/bandpass calibrator (id=0), and the phase and amplitude calibration as derived from their own visibility data. So when applying corrections to any of our sources, the respective field for bandpass.cal will be our bandpass calibrator (field='0'), but the field for fluxscale.cal will be '1' for both the phase calibrator itself and the target field.

Next, apply the tables to the phase calibrator: 

# Interactive CASA
default applycal
inp
vis='ngc5921.demo.ms'
field='1'
gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal']
gainfield=['','0','1']
calwt=False
flagbackup=True
inp
go

(Note: the only changes from the application to the flux calibrator are the field to apply the calibration to and the gainfield for the fluxscale.cal table, both changed to refer to the phase calibrator.) 

# Psuedo-interactive CASA
# for the phase calibrator (field '1') 
applycal(vis='ngc5921.demo.ms', field='1', 
         gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal'], 
         gainfield=['','0','1'], 
         calwt=False, flagbackup=True)

Where:
    vis='ngc5921.demo.ms'     # the measurement set
    field='1'                 # field id(s) to work on - 1 = the flux calibrator
    gaintable=['antgain.cal''bandpass.cal','fluxscale.cal'] # gain calibration table(s) to apply
    gainfield=['','0','1']    # field id(s) from which each respective gaintable was derived   
    calwt=False               # determines if the weights are calibrated along with the data
    flagbackup=True           # automatically back up the state of flags before the run

Finally, apply the tables to the science target: 

# Interactive CASA
default applycal
inp
vis='ngc5921.demo.ms'
field='2'
gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal']
gainfield=['','0','1']
calwt=False
flagbackup=True
inp
go

(Note: the only change from the phase calibrator is the field to apply the calibration to – the gain fields are all the same.) 

# Psuedo-interactive CASA
# for the science target (field '2') 
applycal(vis='ngc5921.demo.ms', field='2', 
         gaintable=['antgain.cal', 'bandpass.cal', 'fluxscale.cal'], 
         gainfield=['','0','1'], 
         calwt=False, flagbackup=True)

Where:
    vis='ngc5921.demo.ms'     # the measurement set
    field='2'                 # field id(s) to work on - 2 = the science target
    gaintable=['antgain.cal''bandpass.cal','fluxscale.cal'] # gain calibration table(s) to apply
    gainfield=['','0','1']    # field id(s) from which each respective gaintable was derived   
    calwt=False               # determines if the weights are calibrated along with the data
    flagbackup=True           # automatically back up the state of flags before the run

Plot the spectrum

Integrated spectrum from the calibrated visibilities plotted with the two polarizations shown in different colors. This shows which channels contain an HI signal and which are good to use for continuum subtraction. Click to enlarge

Before we attempt to image the 21 cm cube of the source, we need to subtract off the underlying continuum, which means we need to plot the integrated spectrum of the source to determine the line-free channels where we can fit the continuum.

We can do this in plotms. 

# Interactive CASA
default plotms
inp
vis='ngc5921.demo.ms'
field='2'
spw='0:6~56'
averagedata=True
avgtime='3600'
avgscan=True
avgbaseline=True
xaxis='channel'
yaxis='amp'
coloraxis='corr'
ydatacolumn='corrected'
inp
go

# Psuedo-interactive CASA
plotms(vis='ngc5921.demo.ms', field='2', spw='0:6~56', averagedata=True, avgtime='3600', avgscan=True, avgbaseline=True, xaxis='channel', yaxis='amp', ydatacolumn='corrected')

Where:
    vis='ngc5921.demo.ms'         # the measurement set
    field='2'                     # select the science target
    averagedata=True              # average the data (enables data-averaging options)
    avgtime='3600'                # average over 3600s (i.e. the whole dataset)
    avgscan=True                  # average across scan boundaries
    avgbaseline=True              # average baselines
    xaxis='channel'               # plot channels across the x axis
    yaxis='amp'                   # plot amplitudes across the y axis
    coloraxis='corr'              # colorizes the plots by correlation (RR and LL)
    ydatacolumn='corrected'       # use the CORRECTED_DATA column (with the calibration applied)

The resulting plot is illustrated in the figure at right. Briefly, we want to average both in time and over baselines to get the signal-to-noise necessary to reveal the 21 cm profile (see Averaging data in plotms for more details on averaging options). If the symbols appear too small, the size may be increased via the Display tab on the GUI: change the Unflagged Points Symbol to 'Custom', change the plotting symbol to 'circle', 'square' or 'diamond', and increase the number of pixels for the plotting symbol.

Note that we have entered all the relevent parameters via the command line interface rather than selecting options in the GUI. If you wish to enter the values directly into the GUI, you can follow the (Tab)Command convention of the flagging tutorial with the following settings :

  • (Data)field = N5921*
  • (Data)Averaging → Time = 3600 (average over some long time window)
  • (Data)Averaging → Scan = True (checkmark; average in time across scan boundaries)
  • (Data)Averaging → All Baselines = True (checkmark)
  • (Axes)X Axis = Channel
  • (Axes)Y Axis = Amp
  • (Display)Colorize = Corr

From inspection of this plot, it looks like channels 4~8 and 50~59 contain line-free channels, suitable to use for continuum subtraction.

Continuum subtraction

The next step is to split off the NGC 5921 data from the multisource measurement set and subtract the continuum. Splitting uses the split command, as follows. 

# Interactive CASA
default split
inp
vis='ngc5921.demo.ms'
field='2'
outputvis='ngc5921.demo.split.ms'
spw=''
datacolumn='corrected'
inp
go

# Psuedo-interactive CASA
plotms(vis='ngc5921.demo.ms', outputvis='ngc5921.demo.split.ms', field='2', spw='', datacolumn='corrected')

Where:
    vis='ngc5921.demo.ms'            # the input measurement set
    outputvis='ngc5921.demo.split.ms # the output split measurement set
    field='2'                        # select the science target
    spw=''                           # select the entire spectral window
    datacolumn='corrected'           # use the CORRECTED_DATA column (with the calibration applied)

This creates a new measurement set called ngc5921.demo.split.ms and copies the calibrated source data (datacolumn = 'corrected') from the CORRECTED_DATA column into it, writing it to the DATA column in the output measurement set.

We can now subtract the continuum from this split dataset in the visibility (uv) plane using uvcontsub. As we determined above, we can use channels 4~8 and 50~59 for this. Note that the uvcontsub task was substantially revised in CASA 6.5 and now has new parameter inputs that are not backwards compatible with inputs based on older CASAguides. 

# Interactive CASA
default uvcontsub
ins
vis='ngc5921.demo.split.ms'
outputvis='ngc5921.demo.uvcontsub.ms'
fitspec='0:4~8;50~59'
fitorder=0
inp
go

# Psuedo-interactive CASA
plotms(vis='ngc5921.demo.ms', outputvis='ngc5921.demo.split.ms', fitspec='0:4~8;50~59', fitorder=0)

Where:
    vis='ngc5921.demo.split ms'          # the input split measurement set
    outputvis='ngc5921.demo.uvcontsub.ms # the output continuum-subtracted measurement set
    fitspec='0:4~8;50~59'                # select the channels over which to fit the continuum
    fitorder=0                           # fit with polynomial order 0 (constant)

(Note: this could be run directly on the original measurement set by specifying vis='ngc5921.demo.ms', field='2', and datacolumn='corrected' to select the science target and the calibrated data column – in a change from its earlier behavior, datacolumn='data' is the default rather than the fallback for uvcontsub, so this must be specified explicitly if not using split data)

The fitspec parameter, if given as a simple string as done here, specifies the spw to be used for the fitting, with the fit order given using fitorder. However, fitspect can be used in more complex ways by specifying it as a python dictionary. For details, see the uvcontsub documentation.

The polynomial fit order specified is used to fit the real and imaginary components separately, so the fitted model amplitude is the quadrature combination of these two fits and is thus not, in general, a polynomial.

Imaging

Plot of amplitude vs projected baseline length (in units of the observing wavelength) produced by plotms. The maximum baseline is just below 5 kλ. Click to enlarge.

Now we can use tclean to generate the primary science product, a cleaned data cube (ra, dec, velocity) from the continuum-subtracted (u, v, channel) measurement set, ngc5921.demo.uvcontsub.ms. Things to consider in using tclean:

  • To ensure channels aren't averaged prior to imaging and proper Doppler combination, choose specmode='cube'.
  • The maximum baseline is just under 5 kλ (see the figure at right, showing this plotted with plotms), and so the expected synthetic beam is roughly 1.22 × 206265 / 5000 = 50 arcseconds (subject to the details of u, v weighting), as expected for D configuration. Pixels should sample the beam better than 3 times, so 15 arcseconds is a good choice of pixel size (cell = ['15.0arcsec','15.0arcsec']).
  • We only want to clean down to the noise, which can be determined by examining line-free channels in an image made without cleaning (a 'dirty' image), as detailed below.
A channel near the center of the source in the dirty cube in CARTA, compare to the same channel in the tcleaned cube below. Click to enlarge.

To create a dirty image: 

# Interactive CASA
default tclean
inp
vis='ngc5921.demo.uvcontsub.ms'
specmode=cube
inp                              #Run inp again, as setting specmode=cube opens new options
cell=['15.0arcsec','15.0arcsec']
outframe='bary'
niter = 0
imagename='ngc5921.demo.dirty'
datacolumn='data'
imsize=[256,256]
pblimit=-0.2
weighting='briggs'
robust=0.5
inp 
go

# Pseudo-interactive CASA
tclean(vis='ngc5921.demo.uvcontsub.ms', imagename='ngc5921.demo.dirty', specmode='cube', niter=0, imsize=[256,256], cell=['15.0arcsec','15.0arcsec'], outframe='baby', weighting='briggs', robust=0.5, interactive=False, pblimit=-0.2)

Where:
vis='ngc5921.demo.uvcontsub.ms'. # the input measurement set
specmode=cube                    # sets the spectral mode to properly handle line data
cell=['15.0arcsec','15.0arcsec'] # sets the cell (pixel) size
outframe='bary'                  # sets the velocity frame to the extragalactic standard of barycentric
niter = 0                        # sets the number of clean cycles to 0 (i.e. no cleaning)
imagename='ngc5921.demo.dirty'   # the output image name
datacolumn='data'                # tells tclean to use the DATA column
imsize=[256,256]                 # sets the image size (in pixels)
pblimit=-0.2                     # negative value to not blank pixels beyond a primary beam gain of 20%
weighting='briggs'               # use Briggs weighting...
robust=0.5                       # ...with a robust value of 0.5

The output ngc5921.demo.dirty.image file (note that .image gets appended – other outputs such as the .psf, .pb, etc. are also created by tclean) can then be viewed using CARTA. By defining a rectangular region that takes in the whole image plane and setting the Z profile to 'RMS', it is possible to see how the RMS level varies by channel. You can see how the noise falls from the edge of the bandpass to around 1.75 mJy by channel 6, then rises again from channel 9 when the source starts to contribute, then falls back to 1.75 mJy again by channel 50, rising again from channel 56. This also confirms our earlier choices of which channels looked line-free and which channels were in the best signal-to-noise section of the cube. If we thus want to clean to 4 sigma, we can set threshold='7.0mJy'.

The dirty image can also be used to determine the region to be cleaned by tclean. This is most easily done by defining a region that encloses the area where flux is visible on the dirty image (which can be checked by stepping through the channels) and then exporting this region as a CRTF file, here cleanbox.crtf, that can be read by CASA.

We are now ready to run tclean again and create the clean cube. 

# Interactive CASA
default tclean
inp
vis='ngc5921.demo.uvcontsub.ms'
specmode=cube
cell=['15.0arcsec','15.0arcsec']
outframe='bary'
datacolumn='data'
imsize=[256,256]
pblimit=-0.2
weighting='briggs'
robust=0.5
imagename='ngc5921.demo.clean'
niter=6000
mask='cleanbox.crtf'
threshold='7.0mJy'
inp 
go

(Note: only the last four parameters, imagename, niter, mask and threshold have changed) 

# Pseudo-interactive CASA
tclean(vis='ngc5921.demo.uvcontsub.ms', imagename='ngc5921.demo.clean', specmode='cube', niter=6000,  threshold='7.0mJy', imsize=[256,256], cell=['15.0arcsec','15.0arcsec'], outframe='baby', weighting='briggs', robust=0.5,  mask = 'clean box.crtf', interactive=False, pblimit=-0.2)

Where:
vis='ngc5921.demo.uvcontsub.ms'. # the input measurement set
specmode=cube                    # sets the spectral mode to properly handle line data
cell=['15.0arcsec','15.0arcsec'] # sets the cell (pixel) size
outframe='bary'                  # sets the velocity frame to the extragalactic standard of barycentric
datacolumn='data'                # tells tclean to use the DATA column
imsize=[256,256]                 # sets the image size (in pixels)
pblimit=-0.2                     # negative value to not blank pixels beyond a primary beam gain of 20%
weighting='briggs'               # use Briggs weighting...
robust=0.5                       # ...with a robust value of 0.5
imagename='ngc5921.demo.clean'   # the output image name
niter=6000                       # sets the number of clean cycles to 6000 (will stop at threshold value)
mask='cleanbox.crtf'             # use the mask defined in the cleanbox.crtf file created by CARTA
threshold='7.0mJy'               # stop cleaning at this flux level

Inspecting the data cube

We can use imhead to examine the cube header: 

# Interactive CASA
default imhead
inp
imagename='ngc5921.demo.clean.image'
inp
go

# Pseudo-interactive CASA
imhead(imagename='ngc5921.demo.clean.image', mode='summary')

The output, as follows, appears in the logger window: 

2023-01-18 21:15:06 INFO imhead	##########################################
2023-01-18 21:15:06 INFO imhead	##### Begin Task: imhead             #####
2023-01-18 21:15:06 INFO imhead	imhead( imagename='ngc5921.demo.clean.image', mode='summary', hdkey='', hdvalue='', verbose=False )
2023-01-18 21:15:08 INFO ImageMetaData	   
2023-01-18 21:15:08 INFO ImageMetaData	Image name       : ngc5921.demo.clean.image
2023-01-18 21:15:08 INFO ImageMetaData	Object name      : N5921_2
2023-01-18 21:15:08 INFO ImageMetaData	Image type       : PagedImage
2023-01-18 21:15:08 INFO ImageMetaData	Image quantity   : Intensity
2023-01-18 21:15:08 INFO ImageMetaData	Pixel mask(s)    : None
2023-01-18 21:15:08 INFO ImageMetaData	Region(s)        : None
2023-01-18 21:15:08 INFO ImageMetaData	Image units      : Jy/beam
2023-01-18 21:15:08 INFO ImageMetaData	Restoring Beams 
2023-01-18 21:15:08 INFO ImageMetaData	Pol   Type Chan        Freq     Vel
2023-01-18 21:15:08 INFO ImageMetaData	  I    Max    0 1.41273e+09 1619.82   53.0827 arcsec x   47.0911 arcsec pa=  7.9378 deg
2023-01-18 21:15:08 INFO ImageMetaData	  I    Min   48 1.41390e+09 1372.47   53.0292 arcsec x   46.9723 arcsec pa=  9.2164 deg
2023-01-18 21:15:08 INFO ImageMetaData	  I Median   31 1.41349e+09 1460.08   53.1100 arcsec x   47.0231 arcsec pa=  8.0658 deg
2023-01-18 21:15:08 INFO ImageMetaData	   
2023-01-18 21:15:08 INFO ImageMetaData	Direction reference : J2000
2023-01-18 21:15:08 INFO ImageMetaData	Spectral  reference : BARY
2023-01-18 21:15:08 INFO ImageMetaData	Velocity  type      : RADIO
2023-01-18 21:15:08 INFO ImageMetaData	Rest frequency      : 1.42041e+09 Hz
2023-01-18 21:15:08 INFO ImageMetaData	Pointing center     :  15:22:00.000000  +05.04.00.000000
2023-01-18 21:15:08 INFO ImageMetaData	Telescope           : VLA
2023-01-18 21:15:08 INFO ImageMetaData	Observer            : TEST
2023-01-18 21:15:08 INFO ImageMetaData	Date observation    : 1995/04/13/09:33:00.000687
2023-01-18 21:15:08 INFO ImageMetaData	Telescope position: [-1.60119e+06m, -5.04198e+06m, 3.55488e+06m] (ITRF)
2023-01-18 21:15:08 INFO ImageMetaData	   
2023-01-18 21:15:08 INFO ImageMetaData	Axis Coord Type      Name             Proj Shape Tile   Coord value at pixel    Coord incr Units
2023-01-18 21:15:08 INFO ImageMetaData	------------------------------------------------------------------------------------------------ 
2023-01-18 21:15:08 INFO ImageMetaData	0    0     Direction Right Ascension   SIN   256   64  15:22:00.000   128.00 -1.500000e+01 arcsec
2023-01-18 21:15:08 INFO ImageMetaData	1    0     Direction Declination       SIN   256   64 +05.04.00.000   128.00  1.500000e+01 arcsec
2023-01-18 21:15:08 INFO ImageMetaData	2    1     Stokes    Stokes                    1    1             I
2023-01-18 21:15:08 INFO ImageMetaData	3    2     Spectral  Frequency                63    9   1.41273e+09     0.00 2.4415203e+04 Hz
2023-01-18 21:15:08 INFO ImageMetaData	                     Velocity                               1619.82     0.00 -5.153101e+00 km/s
2023-01-18 21:15:08 INFO imhead	Task imhead complete. Start time: 2023-01-18 14:15:06.134860 End time: 2023-01-18 14:15:07.997282
2023-01-18 21:15:08 INFO imhead	##### End Task: imhead               #####
2023-01-18 21:15:08 INFO imhead	##########################################


Cube statistics

We can use imstat to display statistics of the cube cubes. The following example displays the statistics for an empty region of the cube (as identified visually in CARTA). 

#Interactive CASA
default instate
inp
imagename = 'ngc5921.demo.clean.image'
box = '10,10,100,100' 
inp
go

As with imhead, the output goes to the logger window: 

2023-01-18 21:42:36 INFO imstat	##########################################
2023-01-18 21:42:36 INFO imstat	##### Begin Task: imstat             #####
2023-01-18 21:42:36 INFO imstat	imstat( imagename='ngc5921.demo.clean.image', axes=[], region='', box='10,10,100,100', chans='', stokes='', listit=True, verbose=True, mask='', stretch=False, logfile='', append=True, algorithm='classic', fence=-1.0, center='mean', lside=True, zscore=-1.0, maxiter=-1, clmethod='auto', niter=3 )
2023-01-18 21:42:36 INFO imstat	Using specified box(es) 10,10,100,100
2023-01-18 21:42:36 INFO imstat	Determining stats for image ngc5921.demo.clean.image
2023-01-18 21:42:36 INFO imstat	Selected bounding box : 
2023-01-18 21:42:36 INFO imstat	    [10, 10, 0, 0] to [100, 100, 0, 62]  (15:23:58.379, +04.34.29.305, I, 1.41273e+09Hz to 15:22:28.105, +04.56.59.962, I, 1.41424e+09Hz)
2023-01-18 21:42:36 INFO imstat	Statistics calculated using Classic algorithm
2023-01-18 21:42:36 INFO imstat	Regions --- 
2023-01-18 21:42:36 INFO imstat	         -- bottom-left corner (pixel) [blc]:  [10, 10, 0, 0]
2023-01-18 21:42:36 INFO imstat	         -- top-right corner (pixel) [trc]:    [100, 100, 0, 62]
2023-01-18 21:42:36 INFO imstat	         -- bottom-left corner (world) [blcf]: 15:23:58.379, +04.34.29.305, I, 1.41273e+09Hz
2023-01-18 21:42:36 INFO imstat	         -- top-right corner (world) [trcf]:   15:22:28.105, +04.56.59.962, I, 1.41424e+09Hz
2023-01-18 21:42:36 INFO imstat	Values --- 
2023-01-18 21:42:36 INFO imstat	         -- flux [flux]:                            1.41948 Jy.km/s
2023-01-18 21:42:36 INFO imstat	         -- number of points [npts]:                521703
2023-01-18 21:42:36 INFO imstat	         -- maximum value [max]:                    0.0230701 Jy/beam
2023-01-18 21:42:36 INFO imstat	         -- minimum value [min]:                    -0.0222025 Jy/beam
2023-01-18 21:42:36 INFO imstat	         -- position of max value (pixel) [maxpos]: [20, 44, 0, 61]
2023-01-18 21:42:36 INFO imstat	         -- position of min value (pixel) [minpos]: [35, 70, 0, 61]
2023-01-18 21:42:36 INFO imstat	         -- position of max value (world) [maxposf]: 15:23:48.368, +04.42.59.428, I, 1.41422e+09Hz
2023-01-18 21:42:36 INFO imstat	         -- position of min value (world) [minposf]: 15:23:33.331, +04.49.29.579, I, 1.41422e+09Hz
2023-01-18 21:42:36 INFO imstat	         -- Sum of pixel values [sum]:               3.46393 Jy/beam
2023-01-18 21:42:36 INFO imstat	         -- Sum of squared pixel values [sumsq]:     2.32674 Jy/beam.Jy/beam
2023-01-18 21:42:36 INFO imstat	Statistics --- 
2023-01-18 21:42:36 INFO imstat	        -- Mean of the pixel values [mean]:         6.63965e-06 Jy/beam
2023-01-18 21:42:36 INFO imstat	        -- Variance of the pixel values :           4.45985e-06 Jy/beam
2023-01-18 21:42:36 INFO imstat	        -- Standard deviation of the Mean [sigma]:  0.00211184 Jy/beam
2023-01-18 21:42:36 INFO imstat	        -- Root mean square [rms]:                  0.00211184 Jy/beam
2023-01-18 21:42:36 INFO imstat	        -- Median of the pixel values [median]:     0 Jy/beam
2023-01-18 21:42:36 INFO imstat	        -- Median of the deviations [medabsdevmed]: 0.00126323 Jy/beam
2023-01-18 21:42:36 INFO imstat	        -- IQR [quartile]:                          0.00252672 Jy/beam
2023-01-18 21:42:36 INFO imstat	        -- First quartile [q1]:                     -0.00125785 Jy/beam
2023-01-18 21:42:36 INFO imstat	        -- Third quartile [q3]:                     0.00126887 Jy/beam
2023-01-18 21:42:36 INFO imstat	Sum column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat	Mean column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat	Std_dev column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat	Minimum column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat	Maximum column unit = Jy/beam
2023-01-18 21:42:36 INFO imstat	Npts          Sum           Mean          Rms           Std_dev       Minimum       Maximum     
2023-01-18 21:42:36 INFO imstat	 5.217030e+05  3.463928e+00  6.639655e-06  2.111845e-03  2.111836e-03 -2.220254e-02  2.307010e-02
2023-01-18 21:42:36 INFO imstat	Task imstat complete. Start time: 2023-01-18 14:42:36.025027 End time: 2023-01-18 14:42:36.481128
2023-01-18 21:42:36 INFO imstat	##### End Task: imstat               #####
2023-01-18 21:42:36 INFO imstat	##########################################

Alternatively, we can use the cleanbox.crtf file created earlier to examine the stats in the region containing the source: 

#Interactive CASA
default instate
inp
imagename = 'ngc5921.demo.clean.image'
box = ''
region='cleanbox.crtf' 
inp
go

Which gives the output: 

2023-01-18 21:44:58 INFO imstat	##########################################
2023-01-18 21:44:58 INFO imstat	##### Begin Task: imstat             #####
2023-01-18 21:44:58 INFO imstat	imstat( imagename='ngc5921.demo.clean.image', axes=[], region='cleanbox.crtf', box='', chans='', stokes='', listit=True, verbose=True, mask='', stretch=False, logfile='', append=True, algorithm='classic', fence=-1.0, center='mean', lside=True, zscore=-1.0, maxiter=-1, clmethod='auto', niter=3 )
2023-01-18 21:44:59 INFO imstat	RegionTextParser::_determineVersion: Found spec version 0
2023-01-18 21:44:59 INFO imstat	Combined 1 image regions (which excludes any annotation regions)
2023-01-18 21:44:59 INFO imstat	The specified region will select all pixels that are included in the region. Full pixels will be included even when they are only partially covered by the region(s).
2023-01-18 21:44:59 INFO imstat	Region read from CRTF file cleanbox.crtf
2023-01-18 21:44:59 INFO imstat	Determining stats for image ngc5921.demo.clean.image
2023-01-18 21:44:59 INFO imstat	Selected bounding box : 
2023-01-18 21:44:59 INFO imstat	    [111, 107, 0, 0] to [150, 151, 0, 62]  (15:22:17.064, +04.58.44.986, I, 1.41273e+09Hz to 15:21:37.910, +05.09.44.977, I, 1.41424e+09Hz)
2023-01-18 21:44:59 INFO imstat	Statistics calculated using Classic algorithm
2023-01-18 21:44:59 INFO imstat	Regions --- 
2023-01-18 21:44:59 INFO imstat	         -- bottom-left corner (pixel) [blc]:  [111, 107, 0, 0]
2023-01-18 21:44:59 INFO imstat	         -- top-right corner (pixel) [trc]:    [150, 151, 0, 62]
2023-01-18 21:44:59 INFO imstat	         -- bottom-left corner (world) [blcf]: 15:22:17.064, +04.58.44.986, I, 1.41273e+09Hz
2023-01-18 21:44:59 INFO imstat	         -- top-right corner (world) [trcf]:   15:21:37.910, +05.09.44.977, I, 1.41424e+09Hz
2023-01-18 21:44:59 INFO imstat	Values --- 
2023-01-18 21:44:59 INFO imstat	         -- flux [flux]:                            28.2043 Jy.km/s
2023-01-18 21:44:59 INFO imstat	         -- number of points [npts]:                113400
2023-01-18 21:44:59 INFO imstat	         -- maximum value [max]:                    0.0559169 Jy/beam
2023-01-18 21:44:59 INFO imstat	         -- minimum value [min]:                    -0.0221281 Jy/beam
2023-01-18 21:44:59 INFO imstat	         -- position of max value (pixel) [maxpos]: [134, 134, 0, 43]
2023-01-18 21:44:59 INFO imstat	         -- position of min value (pixel) [minpos]: [145, 138, 0, 61]
2023-01-18 21:44:59 INFO imstat	         -- position of max value (world) [maxposf]: 15:21:53.976, +05.05.29.998, I, 1.41378e+09Hz
2023-01-18 21:44:59 INFO imstat	         -- position of min value (world) [minposf]: 15:21:42.932, +05.06.29.986, I, 1.41422e+09Hz
2023-01-18 21:44:59 INFO imstat	         -- Sum of pixel values [sum]:               68.8153 Jy/beam
2023-01-18 21:44:59 INFO imstat	         -- Sum of squared pixel values [sumsq]:     2.27782 Jy/beam.Jy/beam
2023-01-18 21:44:59 INFO imstat	Statistics --- 
2023-01-18 21:44:59 INFO imstat	        -- Mean of the pixel values [mean]:         0.000606837 Jy/beam
2023-01-18 21:44:59 INFO imstat	        -- Variance of the pixel values :           1.97185e-05 Jy/beam
2023-01-18 21:44:59 INFO imstat	        -- Standard deviation of the Mean [sigma]:  0.00444055 Jy/beam
2023-01-18 21:44:59 INFO imstat	        -- Root mean square [rms]:                  0.0044818 Jy/beam
2023-01-18 21:44:59 INFO imstat	        -- Median of the pixel values [median]:     0 Jy/beam
2023-01-18 21:44:59 INFO imstat	        -- Median of the deviations [medabsdevmed]: 0.00138569 Jy/beam
2023-01-18 21:44:59 INFO imstat	        -- IQR [quartile]:                          0.00277213 Jy/beam
2023-01-18 21:44:59 INFO imstat	        -- First quartile [q1]:                     -0.001358 Jy/beam
2023-01-18 21:44:59 INFO imstat	        -- Third quartile [q3]:                     0.00141413 Jy/beam
2023-01-18 21:44:59 INFO imstat	Sum column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat	Mean column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat	Std_dev column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat	Minimum column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat	Maximum column unit = Jy/beam
2023-01-18 21:44:59 INFO imstat	Npts          Sum           Mean          Rms           Std_dev       Minimum       Maximum     
2023-01-18 21:44:59 INFO imstat	 1.134000e+05  6.881528e+01  6.068366e-04  4.481805e-03  4.440551e-03 -2.212812e-02  5.591685e-02
2023-01-18 21:44:59 INFO imstat	Task imstat complete. Start time: 2023-01-18 14:44:58.195518 End time: 2023-01-18 14:44:59.067297
2023-01-18 21:44:59 INFO imstat	##### End Task: imstat               #####
2023-01-18 21:44:59 INFO imstat	##########################################

The integrated spectrum

Example of the CARTA rectangle selection tool on one channel of the NGC 5921 21 cm data cube. The spectral profile window is shown at right. This is the same channel shown in the dirty cube above. Click to enlarge.

CARTA can be used to produce an integrated spectrum from the spectral line cube. Once you have defined a region (you can use the region used earlier to define the region to be cleaned), you can set the Z profile statistic to 'Sum' to see the spectrum of the pixels summed in this region in each channel, 'Mean' to see the mean spectrum, or 'FluxDensity' to see the beam-corrected flux density spectrum (which is probably what you want). Different plotting and smoothing options are available, and you can export an image of the spectrum or export the data (as a tab-separated variables file, which you can then read into your favorite plotting program, iPython notebook, etc.).

Cube moments

The moment 0 (integrated intensity) and moment 1 (velocity field) 21 cm images of NGC 5921, produced using immoments and displayed with CARTA. Click to enlarge.

Cube moments are maps of weighted sums along the velocity axis. In CASA, they are generated by the task immoments. The zeroth moment (moments = 0) is a sum of intensities along the velocity axis (the integrated intensity map); the first moment (moment = 1) is the sum of velocities weighted by intensity (the velocity field); the second moment (moment = 2) is a map of the velocity dispersion; see the immoments documentation for additional options.

The following example produces maps of the zeroth and first moments, or the integrated intensity and velocity field. To form these maps, we will mask out pixels without signal (below 3 sigma) using hard global limits. We will also collapse along the spectral (channel) axis (the default) and include those channels that show flux in the integrated spectrum, i.e. 9~48. 

#Interactive CASA
default immoments
inp
imagename='ngc5921.demo.clean.image'
moments=[0,1]
chans='9~48'
excludepix=[-100,0.00525]
outfile='ngc5921.demo.moment'
inp
go

#Pseudo-interactive CASA
immoments(imagename='ngc5921.demo.clean.image', moments=[0,1], excludepix=[-100, 0.00525], axis='spectral', chans='9~48', outfile='ngc5921.demo.moment')

Where: 

imagename='ngc5921.demo.clean.image' # input image cube
moments = [0,1]                      # do zeroth and first moments
excludepix = [-100,0.00525]          # use only pixels > 3 sigma
outfile='ngc5921.demo.moment'        # the output filename root (or filename if only doing one moment)

You will get a lot of warnings in the logger and the terminal about the convolving kernel having a size less than the pixel diagonal length. This is because immoments has to convolve all of the channels to have the same beam size prior to forming the moment map, but as they all have very similar beam sizes already the convolving kernel needed for this is fairly small. These warnings can be ignored.

Two files are created by this: ngc5921.demo.moment.integrated (the zeroth moment) and ngc5921.demo.moment.weighted_coord (the first moment). These can be opened and manipulated in CARTA.

Export the Data

To export the uv data and the image cube as FITS files, use exportuvfits and exportfits respectively.

For example, to export the continuum-subtracted uv data (the measurement set we used as input to tclean): 

#Interactive python
default exportuvfits
inp
vis='ngc5921.demo.uvcontsub.ms'
fitsfile='ngc5921.demo.uvcontsub.uvfits' 
datacolumn='data'
inp
go

#Pseudo-interactive python
exportuvfits(vis='ngc5921.demo.uvcontsub.ms', fitsfile='ngc5921.demo.uvcontsub.uvfits', datacolumn='data')

Note: the default is to export the CORRECTED_DATA column. If we wanted to export the full data-set after applying the calibration this would be appropriate, but uvcontsub writes out to the DATA column into a new measurement set.

And for the cleaned cube: 

#Interactive python
default exportfits
inp
imagename='ngc5921.demo.clean.image'
fitsimage='ngc5921.demo.clean.fits'
velocity=True
optical=True
inp
go

In this example, we have chosen to write the FITS cube with velocity rather than frequency on the spectral axis and to use the optical (cz) convention for velocity. Both of these are, of course, optional. 

#Pseudo-interactive python
exportfits(imagename='ngc5921.demo.clean.image', fitsimage='ngc5921.demo.clean.fits')

The moment maps (or any other CASA images) can be similarly exported using exportfits.

Appendix: Python Notes

os.system

os.system allows you to run shell commands from within python / CASA. For example: 

import os
os.system('ls -sF')

will give an OS-level listing of the current directory's contents.

os.environ.get

It's worth having a look at the output of the os.environ.get command to understand the python syntax (alternative: os.getenv). You can think of os.environ as a list of operating system environment variables, and get is a method that extracts information about the requested environment variable, here, CASAPATH. Get returns a string of whitespace separated information, and .split() turns that string into a list. The array index [0] extracts the first element of that list, which contains the path.

To illustrate, here is some example python I/O in CASA. 

CASA <12>: print os.environ.get('CASAPATH')
/usr/lib64/casapy/30.0.9709test-001 linux local el5bld64b

CASA <13>: print os.environ.get('CASAPATH').split()
['/usr/lib64/casapy/30.0.9709test-001', 'linux', 'local', 'el5bld64b']

CASA <14>: print os.environ.get('CASAPATH').split()[0]
/usr/lib64/casapy/30.0.9709test-001

↵ Pre-upgrade VLA Tutorials

Last checked on CASA Version 6.5.2.

Retrieved from "https://casaguides.nrao.edu/index.php?title=NGC_5921:_red-shifted_HI_emission_6.5.2&oldid=34501"