View source for Sunspot Band6 Feathering for CASA 6.6.1

[[Category:ALMA]][[Category:Imaging]][[Category:Sun]]
{{checked_6.5.4}}

==Overview==
{{CARTA_6.5.4}}

This portion of the [[Sunspot Band6]] guide covers the combination process between the synthesized solar image and the full-sun image obtained with the TP array. It is the final step after:
# calibrating the IF visibility data
# imaging the IF data
# calibrating and imaging the single-dish data

If you wish, you may skip parts 1 and 2, download the calibrated data package, ''Sunspot_Band6_CalibratedData.tgz'', and complete part 3.

If you completed parts 1 and 2, we assume that you are working in the directory ''Sunspot_Band6_UncalibratedData''. If you skip parts 1 and 2, and use the provided calibrated data, we assume that the working directory is ''Sunspot_Band6_CalibratedData''.

For this step you will need:
* ''AR12470_B6AllSpw_I.image'' - the synth image from part 2, before PB correction.
* ''AR12470_B6AllSpw_I.pb'' - the PB from part 2.
* ''uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3.rescl'' - the rescaled single dish image from part 3.

==Prepare the Single-Dish Data for Combination==

===List the Image Header===
We start by defining names for our images.

<source lang='python'>
# In CASA
if_base       = 'AR12470_B6AllSpw_I'                         # basename of the interferometric image
sd_base       = 'uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3'    # basename of the single dish image
combined_base = 'AR12470_B6AllSpw_I_Feather'                 # basename of the combined products
</source>

Now let's examine the single dish image header with {{imhead_6.5.4}} and ''mode='list'''.

<source lang='python'>
# In CASA
imhead(imagename=sd_base+'.rescl', mode='list')
</source>

Output are the supported keywords and their values in the format ''hdkey: hdvalue''.

<pre style="background-color: #fffacd;">
General --
        -- imtype: Intensity
        -- object: Sun
        -- equinox: J2000
        -- date-obs: 2015/12/18/20:12:21.416250
        -- observer: lknee
        -- projection: SIN
        -- restfreq: [248000000000.1]
        -- reffreqtype: LSRK
        -- telescope: ALMA
        -- beammajor: 26.722411arcsec
        -- beamminor: 26.722411arcsec
        -- beampa: 0deg
        -- bunit: K
        -- masks: [mask0]
        -- shape: [800, 800, 1, 1]
        -- datamin: 83.8561
        -- datamax: 7369.92
        -- minpos: 17:44:43.874 -23.04.42.909 I 2.4799e+11Hz
        -- minpixpos: [244, 770, 0, 0]
        -- maxpos: 17:43:24.017 -23.17.12.723 I 2.4799e+11Hz
        -- maxpixpos: [611, 520, 0, 0]
axes --
        -- ctype1: Right Ascension
        -- ctype2: Declination
        -- ctype3: Stokes
        -- ctype4: Frequency
crpix --
        -- crpix1: 400.0
        -- crpix2: 400.0
        -- crpix3: 0.0
        -- crpix4: 0.0
crval --
        -- crval1:  266.02.29.400deg.min.sec
        -- crval2: - 23.23.13.143deg.min.sec
        -- crval3: ['I']
        -- crval4: 247990336130.1Hz
cdelt --
        -- cdelt1: -  0.00.03.000deg.min.sec
        -- cdelt2:    0.00.03.000deg.min.sec
        -- cdelt3: 1
        -- cdelt4: 1999922065.6Hz
units --
        -- cunit1: rad
        -- cunit2: rad
        -- cunit3: 
        -- cunit4: Hz
</pre>

===Convert the Brightness Unit===

[[File:sunspot_singledish_coordinate_unit_CASA_6.5.4.png|500px|thumb|right|'''Fig. 1.'''<br>Left: The full-sun map with its original coordinate grid and brightness units of Kelvin.<br> Right: The shifted coordinate grid and brightness converted to units of Jy/beam.]]

The unit of the full-sun map is Kelvin. On the other hand, the unit of the synthesized image is Jy/beam. We retrieve frequency and beam size information with {{imhead_6.5.4}}, then convert the brightness values from K to Jy/beam with {{immath_6.5.4}}. This will produce a new image with the scaled values.

<source lang='python'>
# In CASA

# derive a scaling factor based on single dish frequency and beam size
freq_SD   = imhead(sd_base+'.rescl', mode='get', hdkey='crval4')['value']
sd_bmajor = imhead(sd_base+'.rescl', mode='get', hdkey='beammajor')['value']
sd_bminor = imhead(sd_base+'.rescl', mode='get', hdkey='beamminor')['value']

convK2Jb = str(13.6 * (300./(freq_SD/1.e9))**2. * (1./sd_bmajor)*(1./sd_bminor))
# = '0.02787151811741245'

# create a new image with scaled values
import os
os.system(f'rm -rf {sd_base}.jyb.im')

immath(
  imagename=sd_base+'.rescl',
  expr='IM0/'+convK2Jb,
  outfile=sd_base+'.jyb.im')

# change the brightness unit in the new image header from K to Jy/beam
imhead(
  imagename=sd_base+'.jyb.im',
  mode='put',
  hdkey='bunit',
  hdvalue='Jy/beam')
</source>
<!--
# set the Stokes parameter to I
imhead(imagename=sd_base+'.jyb.im', mode='put', hdkey='crval3', hdvalue=['I'])
-->

===Obtain the RA/Dec Coordinate of the Sun Center at the Reference Time===
Before starting the combination process in CASA, we need to know the RA/Dec coordinate of the sun center at the reference time, which is used during the interferometric observation, because the observing time of the TP-array is not exactly the same. The Sun was moving on the RA/Dec coordinate frame during the gap between these observations. We need to shift the coordinate of the full-sun image based on the coordinate of the sun center at the reference time. The reference time of the observation is:<br> ''19:49:00UT, December 18 2015''.

We obtain the RA/Dec coordinate of the sun center estimated from [http://ssd.jpl.nasa.gov/horizons.cgi JPL's HORIZONS system]:<br> ''RA: 266.01898 degree<br> Dec: -23.38648 degrees.''

===Change the Coordinate===

RA/Dec are shown in the image header as ''ctype1/ctype2'', which correspond to ''crval1/crval2''. We shift the coordinate based on the RA/Dec coordinate obtained in the previous section by using ''mode='put''' as follows.

<source lang='python'>
# In CASA
import numpy as np
sun_ra = str(266.01898 * np.pi/180.)
sun_dec = str(-23.38648 * np.pi/180.)

imhead(imagename=sd_base+'.jyb.im', mode='put', hdkey='crval1', hdvalue=sun_ra)
imhead(imagename=sd_base+'.jyb.im', mode='put', hdkey='crval2', hdvalue=sun_dec)
</source>

Now open the image in CARTA. If using NRAO machines, you can open a new terminal tab, cd to the working directory, then type:

<source lang='bash'>
# in terminal
carta --no_browser
</source>

Copy the output URL into a browser to view your CARTA session. Select and load:
* ''uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3.rescl''
* ''uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3.jyb.im''

The result of the process is shown in Figure 1. The look of the image has not changed, but the coordinates and units are now changed to match the synthesized image.

===Regrid, Trim, and Multiply by the Synth Primary Beam===

[[File:sunspot_singledish_regrid_CASA_6.5.4.png|400px|thumb|right|'''Fig. 2.'''<br>Left: The full-sun image from Figure 1.<br> Right: The full-sun image regridded based on the synthesized image.<br><br> The images are spatially matched and raster scaling matched. A circular region is drawn to clearly show the spatial matching.]]
[[File:sunspot_singledish_regrid_trim_CASA_6.5.4.png|400px|thumb|right|'''Fig. 3.'''<br>Left: The regridded full-sun image.<br> Right: The regridded image after trimming.<br><br> The images are spatially matched and raster scaling matched.]]

Now we regrid and trim the full-sun image with {{imregrid_6.5.4}} and {{imsubimage_6.5.4}} to match the size of the synthesized image as shown in Figure 2.
<!-- The area of the trimming is set to the same as the CLEAN box.
# Trimming to exclude noisy edge regions in the TP image -->

<source lang='python'>
# In CASA
os.system(f'rm -rf {sd_base}.jyb.regrid')
os.system(f'rm -rf {sd_base}.jyb.regrid.subim')

imregrid(
  imagename=sd_base+'.jyb.im',
  template=if_base+'.image',
  axes=[0,1],
  output=sd_base+'.jyb.regrid')

imsubimage(
  imagename=sd_base+'.jyb.regrid',
  outfile=sd_base+'.jyb.regrid.subim',
  box='100,100,400,400')
</source>

Follow the progression by opening the images in CARTA:
* ''uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3.jyb.im''
* ''uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3.jyb.regrid''
* ''uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3.jyb.regrid.subim''

<br clear=all>
[[File:sunspot_PB_trim_CASA_6.5.4.png|400px|thumb|right|'''Fig. 4.'''<br>Left: The original primary beam used in synthesis imaging.<br> Right: The synth PB after trimming.<br><br> In CARTA, Preferences > Render Configuration > NaN color has been chosen as gray here to show that the dimension of the original includes the area outside of the primary beam cutoff of 0.73.]]
[[File:sunspot_singledish_regrid_trim_PBcorrect_CASA_6.5.4.png|400px|thumb|right|'''Fig. 5.'''<br> Left: The regridded and trimmed single dish image from Figure 3.<br> Center: The trimmed synth primary beam from Figure 4.<br> Right: The product of multiplying the first two, resulting in a single dish image that is ready to combine with the synth image.<br><br> All three have been spacially matched, and the left and right are raster scaling matched. Note the color scale of each.]]

Finally, we trim the primary beam response of the synthesized image, and with {{immath_6.5.4}} we multiply this by the trimmed single-dish image:

<source lang='python'>
# In CASA
os.system(f'rm -rf {if_base}.pb.subim')
os.system(f'rm -rf {sd_base}.jyb.regrid.subim.depb')

imsubimage(
  imagename=if_base+'.pb',
  outfile=if_base+'.pb.subim',
  box='100,100,400,400')

immath(
  imagename=[sd_base+'.jyb.regrid.subim',
             if_base+'.pb.subim'],
  expr='IM0*IM1',
  outfile=sd_base+'.jyb.regrid.subim.depb',
  imagemd=sd_base+'.jyb.regrid.subim')
</source>

We specify ''imagemd'' so that the header metadata, including units of Jy/beam and the RA/Dec coordinate we just set, is carried over from the single dish image instead of the trimmed synth primary beam.

Follow the progression by opening the images in CARTA:
* ''AR12470_B6AllSpw_I.pb''
* ''AR12470_B6AllSpw_I.pb.subim''
* ''uid___A002_Xae00c5_X2e6b.PM03.StkI.Spw3.jyb.regrid.subim.depb''

<br clear=all>

==Prepare the Synthesized Image for Combination==

[[File:sunspot_synth_trim_CASA_6.5.4.png|400px|thumb|right|'''Fig. 6.'''<br> Left: The original synth image.<br> Right: The trimmed synth image.<br><br> We set the NaN color to gray to clearly show the dimensions of the original image including the area outside the PB cutoff.]]

Trim the synthesized image to fit the area of the trimmed single-dish image:

<source lang='python'>
# In CASA
os.system(f'rm -rf {if_base}.image.subim')

imsubimage(
  imagename=if_base+'.image',
  outfile=if_base+'.image.subim',
  box='100,100,400,400')
</source>

Examine the images in CARTA:
* ''AR12470_B6AllSpw_I.image''
* ''AR12470_B6AllSpw_I.image.subim''

<br clear=all>

==Combination and Primary Beam Correction==
[[File:sunspot_final_6.5.4.png|thumb|right|600px|'''Fig. 7.'''<br>Left: The regridded, trimmed, and synth-PB scaled single dish image from Figure 5.<br> Center: The trimmed synth image from Figure 6.<br> Right: The final combined single dish + synth image, PB corrected, converted to K, and exported to fits format.]]

The combination of the images can be done using {{feather_6.5.4}}, the same as for non-solar data.

<source lang='python'>
# In CASA
os.system(f'rm -rf {combined_base}.image')

feather(
  imagename=combined_base+'.image',
  highres=if_base+'.image.subim',
  lowres=sd_base+'.jyb.regrid.subim.depb',
  sdfactor=1.0)
</source>

<font color="red">
CAUTION: In this tutorial and the packages of the solar SV data released on 2017/01/18, we use the default parameters of the task, as shown above. As a result, the averaged brightness temperature of the combined image is always a few % larger than the brightness temperature at the same position in the single-dish map, although the values have to be the same. This means that you need to tune the ''sdfactor'' parameter of the task to obtain consistent images before using combined images for your science. See more details in the [https://casadocs.readthedocs.io/en/v6.5.4/notebooks/image_combination.html Image Combination section of the CASA Docs].
</font>

After the feathering process, we do the primary beam correction with {{impbcor_6.5.4}} as follows:

<source lang='python'>
# In CASA
os.system(f'rm -rf {combined_base}.pbcor')

impbcor(
  imagename=combined_base+'.image',
  pbimage=if_base+'.pb.subim',
  outfile=combined_base+'.pbcor',
  mode='divide')
</source>

Examine the images in CARTA as you progress:
* ''AR12470_B6AllSpw_I_Feather.image''
* ''AR12470_B6AllSpw_I_Feather.pbcor''
* ''AR12470_B6AllSpw_I_Feather_K.pbcor''
* ''AR12470_B6AllSpw_I_Feather_K.fits''

To convert the unit from Jy/beam to Kelvin, we use the following commands with {{imhead_6.5.4}} and {{immath_6.5.4}}.

<source lang='python'>
# In CASA

# derive a scaling factor based on interferometric frequency and feather beam size
freq_IF  = imhead(if_base+'.image', mode='get', hdkey='crval4')['value']
f_bmajor = imhead(combined_base+'.image', mode='get', hdkey='beammajor')['value']
f_bminor = imhead(combined_base+'.image', mode='get', hdkey='beamminor')['value']

convJb2K = str(13.6 * (300./(freq_IF/1.e9))**2. * (1./f_bmajor)*(1./f_bminor))
# = '5.629310261438283'

# create a new image with scaled values
os.system(f'rm -rf {combined_base}_K.pbcor')

immath(
  imagename=combined_base+'.pbcor',
  expr='IM0*'+convJb2K,
  outfile=combined_base+'_K.pbcor')
  
# change the brightness unit in the new image header from Jy/beam to K 
imhead(
  imagename=combined_base+'_K.pbcor',
  mode='put',
  hdkey='bunit',
  hdvalue='K')
</source>

Finally, we create the FITS file of the combined and primary corrected map with {{exportfits_6.5.4}}.

<source lang='python'>
# In CASA
os.system(f'rm -rf {combined_base}_K.fits')

exportfits(
  imagename=combined_base+'_K.pbcor',
  fitsimage=combined_base+'_K.fits')
</source>

The final result is shown in Figure 7.

----
<font color="red">
Caution: The single-dish images and feathering images in the solar SV data packages (ex. Sunspot_Band6_ReferenceImages.tgz) were not applied the re-scaling to the single-dish data (see [[Sunspot_Band6_SingleDish_for_CASA_6.5.4#Rescaling_after_Imaging]]). Please do not use the reference image for your science.
</font>