View source for Simulation Guide Component Lists (CASA 6.5.3)

''This guide is verified to work with any CASA 6 release. Below information is obtained using CASA version 6.5.3''  

To create a script of the Python code on this page see [[Extracting scripts from these tutorials]].

==Explanation of the guide==

When writing an interferometric proposal it is often useful to simulate observations of very simple objects, like point sources, Gaussians, and disks.  In CASA, observations can be simulated using task {{simobserve}} and analyzed using task {{simanalyze}}.  This guide demonstrates how to simulate ALMA observations of a Gaussian and some point sources using these tasks and using the {{CASA Toolkit}}.  

We begin by employing component lists in the Toolkit to create an image of a Gaussian flux distribution, which will be saved as a FITS file.  The fits file will then be "observed" using {{simobserve}} and {{simanalyze}} along with four point sources, added via the {{complist}} parameter.   Finally, we show how the same observations could have been done without any skymodel in {{simobserve}}, instead using only component lists.

==Getting Started==

To get started you need to download CASA 6.5.3. Other CASA 6 versions (e.g., the default CASA 6.4.1 version for ALMA and VLA) can also be used, and should produce identical results.

To install CASA, follow the instructions given on the [http://casa.nrao.edu/casa_obtaining.shtml CASA download page].

==CASA Basics==

CASA is the post-processing package for ALMA and EVLA and can handle both interferometric and single dish data.  To get a brief introduction to {{simobserve}} and {{simanalyze}}, the tasks within CASA that we will use here, go to the {{simulation}} pages in {{CASA Docs}} (the official CASA documentation). To learn more about CASA in general, go to the [http://casa.nrao.edu CASA homepage].  Walk-throughs of CASA data reduction for a variety of data sets can be found on the [http://casaguides.nrao.edu CASA Guides website].

Once you have installed CASA, you can launch it by typing "casapy" at the prompt or by double-clicking on the icon, depending on your system and preferences.

==Making a Simple FITS Image==

Here we show how to create a simple FITS image using the CASA tasks and the toolkit.  The example here will be that of a Gaussian flux distribution.  Enter the following lines at the CASA prompt:

<source lang="python">
# In CASA
direction = "J2000 10h00m00.0s -30d00m00.0s"
cl.done()
cl.addcomponent(dir=direction, flux=1.0, fluxunit='Jy', freq='230.0GHz', shape="Gaussian", 
                majoraxis="0.1arcmin", minoraxis='0.05arcmin', positionangle='45.0deg')
#
ia.fromshape("Gaussian.im",[256,256,1,1],overwrite=True)
cs=ia.coordsys()
cs.setunits(['rad','rad','','Hz'])
cell_rad=qa.convert(qa.quantity("0.1arcsec"),"rad")['value']
cs.setincrement([-cell_rad,cell_rad],'direction')
cs.setreferencevalue([qa.convert("10h",'rad')['value'],qa.convert("-30deg",'rad')['value']],type="direction")
cs.setreferencevalue("230GHz",'spectral')
cs.setincrement('1GHz','spectral')
ia.setcoordsys(cs.torecord())
ia.setbrightnessunit("Jy/pixel")
ia.modify(cl.torecord(),subtract=False)
exportfits(imagename='Gaussian.im',fitsimage='Gaussian.fits',overwrite=True)
</source>

[[Image:Gauss_fits.jpg|thumb| Figure 1: Gaussian flux distribution created by the CASA Toolkit via component list.]]

The first line defines a string "direction" which will be the center of the Gaussian flux distribution.

<tt>cl.done</tt> closes any open component lists, if any.

<tt>cl.addcomponent</tt> creates a new component centered at "direction", with a flux of 1 Jy at a frequency of 230 GHz, a Gaussian shape of 0.1 by 0.05 arcminutes, and a position angle of 45 degrees.

<tt>ia.fromshape</tt> creates a new, empty CASA image with the name and dimensions given.

<tt>cs=ia.coordsys</tt> gets the coordinate system of the image.

<tt>cs.setunits</tt> defines the units of the four axes of the new CASA image.

<tt>cell_rad</tt> will be the cell size and units in this CASA image, 0.1 arcseconds.

<tt>cs.setincrement</tt> tells CASA that RA increases to the right, Dec increases going up, and,  a few lines later, that the one channel is 1 GHz wide. 

<tt>cs.setreferencevalue</tt> sets the center of the image in RA, Dec, and frequency. 

<tt>ia.setcoordsys</tt> puts the coordinates and frequencies into the image header.

<tt>ia.setbrightnessunit</tt> defines the brightness unit (Jy per pixel) of the CASA image.

<tt>ia.modify</tt> puts the Gaussian component into the image.

{{exportfits}} writes the resultant CASA image as a FITS file (not strictly necessary since you can run simobserve on Gaussian.im, but useful to know in general).



==Simulating Observations with a FITS Image and a Component List==

One use for component lists would be to simulate the effect of having one or more point sources added to an input image, with the goal of finding out the effect on the simulated observations.  For instance, one might want to know if a faint point source would be detectable if there is extended emission around it.  Conversely, one might want to know if the artifacts from imaging a field with a bright point source would make a project tricky to carry out.  In this example, we will use component lists in the {{simobserve}} task to add four point sources to an input FITS image.  The input image will be the Gaussian flux distribution created above.

First we create the four point sources using the CASA toolkit:

<source lang="python">
# In CASA
os.system('rm -rf point.cl')
cl.done()
cl.addcomponent(dir="J2000 10h00m00.08s -30d00m02.0s", flux=0.1, fluxunit='Jy', freq='230.0GHz', shape="point")
cl.addcomponent(dir="J2000 09h59m59.92s -29d59m58.0s", flux=0.1, fluxunit='Jy', freq='230.0GHz', shape="point")
cl.addcomponent(dir="J2000 10h00m00.40s -29d59m55.0s", flux=0.1, fluxunit='Jy', freq='230.0GHz', shape="point")
cl.addcomponent(dir="J2000 09h59m59.60s -30d00m05.0s", flux=0.1, fluxunit='Jy', freq='230.0GHz', shape="point")
cl.rename('point.cl')
cl.done()
</source>

First we delete any previous version of the file 'point.cl', which will be the output file created in a few lines.  Then we use <tt>cl.done</tt> to begin and end this sequence to close any open component list.  The <tt>cl.addcomponent</tt> commands create point sources that are 0.1 Jy at 230 GHz at the coordinates given in each line.  The <tt>cl.rename</tt> command tells CASA the name of output component list file.

We use {{simobserve}} and {{simanalyze}} to make the simulated observations of these point sources and the Gaussian flux distribution given in the FITS file we made previously in this guide: 

<source lang="python">
# In CASA
default("simobserve")
project = "FITS_list"
skymodel = "Gaussian.fits"
inwidth = "1GHz"
complist = 'point.cl'
compwidth = '1GHz'
direction = "J2000 10h00m00.0s -30d00m00.0s" 
obsmode = "int"
antennalist = 'alma.cycle9.1.cfg'
totaltime = "28800s"
mapsize = "10arcsec"
thermalnoise = ''
simobserve()
</source>

We simulate observations of the Gaussian flux distribution (given with the <tt>skymodel</tt> parameter) with the point sources (given with the {{complist}} parameter) using {{simobserve}}.  We center the observations at the center of the Gaussian flux distribution and the point sources, and the field to be imaged is 20" by 20".  We simulate 8 hours (28800 seconds) of observations with ALMA in the compact Cycle 9.1 array configuration.  

All simobserve output will be written to a directory whose name was given by the project parameter, in this case, project='FITS_list'. Inside this directory, you will find the following files:<br>
- The simulated data, stored as a "measurement set" (FITS_list.alma.cycle9.1.ms)<br>
- CASA image of the point spread function (FITS_list.alma.cycle9.1.quick.psf)<br>
- CASA image of the input sky model rescaled according to the skymodel sub-parameters (FITS_list.alma.cycle9.1.skymodel)<br>
- CASA image of moment-0 of the rescaled input sky model (FITS_list.alma.cycle9.1.skymodel.flat)<br>
- PNG image of the moment-0 rescaled input sky model overlaid with the mosaic pattern specified by the setpointings sub-parameters (FITS_list.alma.cycle9.1.skymodel.png)<br>
- ASCII text listing of mosaic pointings (FITS_list.alma.cycle9.1.ptg.txt)<br>
- A 2x2 PNG summary plot (FITS_list.alma.cycle9.1.observe.png), showing source elevation vs. time, antenna position, uv coverage, and the point spread function.<br> 
When {{simobserve}} is executed, the 2x2 PNG plot will be displayed in the CASA plotter. 


<gallery widths="300px" heights="300px">
File:FITS_list.alma.cycle5.1.skymodel.flat.png|''Figure 2: Loading the skymodel.flat image in the viewer reveals the broad Gaussian in addition to the compact components.
</gallery>

The {{simobserve}} task puts The simulated (u,v)-data that {{simobserve}} puts in a measurement set called "FITS_list.alma.cycle9.1.ms" (inside the "FITS_list" project directory) will be the used as input in {{simanalyze}} to make a map of the emission:

<source lang="python">
default("simanalyze")
project = "FITS_list"
vis="FITS_list.alma.cycle9.1.ms"
imsize = [256,256]
imdirection = "J2000 10h00m00.0s -30d00m00.0s" 
cell = '0.1arcsec'
niter = 5000
threshold = '10.0mJy/beam'
analyze = True
simanalyze()
</source>

Inverting the u-v data and making a clean (deconvolved) map of the flux distribution is done with the {{simanalyze}} task in CASA.  The purpose of this guide is to illustrate the use of component lists, not to make the best possible image of this simple flux distribution, so we don't take much care to do the best possible job with the cleaning.  For instance, we don't use a mask or clean boxes, nor do we clean interactively to make sure that there is no point in cleaning further. For a thorough explanation of imaging and deconvolution, see the following ALMA guides: [http://casaguides.nrao.edu/index.php?title=AntennaeBand7_Imaging_5.4 Antennae Band 7] or [http://casaguides.nrao.edu/index.php?title=TWHydraBand7_Imaging_4.4 TW Hydra Band 7]

<gallery heights="280px" widths="450px">
File:Fits.list.alma.cycle9.1.analysis.png|''Figure 3: simulated observations of a Gaussian (skymodel) and four point sources (component list) - analysis.png image created by simanalyze.
</gallery>

==Simulating Observations with Just a Component List==

The CASA task {{simobserve}} can be run on a simulated sky given entirely by the <tt>complist</tt> parameter, with nothing given in the <tt>skymodel</tt> parameter.  A simulation of observations of a Gaussian plus four point sources can be accomplished with only component lists, as shown in the example below.

<source lang="python">
# In CASA
os.system('rm -rf Gauss_point.cl')
cl.done()
cl.addcomponent(dir="J2000 10h00m00.00s -30d00m00.0s", flux=1.0, fluxunit='Jy', freq='230.0GHz', shape="Gaussian",
                majoraxis="0.1arcmin", minoraxis='0.05arcmin', positionangle='45.0deg')
#
cl.addcomponent(dir="J2000 10h00m00.08s -30d00m02.0s", flux=0.1, fluxunit='Jy', freq='230.0GHz', shape="point")
cl.addcomponent(dir="J2000 09h59m59.92s -29d59m58.0s", flux=0.1, fluxunit='Jy', freq='230.0GHz', shape="point")
cl.addcomponent(dir="J2000 10h00m00.40s -29d59m55.0s", flux=0.1, fluxunit='Jy', freq='230.0GHz', shape="point")
cl.addcomponent(dir="J2000 09h59m59.60s -30d00m05.0s", flux=0.1, fluxunit='Jy', freq='230.0GHz', shape="point")
cl.rename('Gauss_point.cl')
cl.done()
</source>

Here we have created a Gaussian flux distribution with the same properties as in the FITS image created above.  Surrounding the Gaussian are four point sources with the same positions and brightness as before.  The only difference between this call to {{simobserve}} and the one above is that here the Gaussian flux distribution is included in the component list instead of being defined by a FITS file.  

<source lang="python">
# In CASA
default("simobserve")
project = "complist_only"
complist = 'Gauss_point.cl'
compwidth = '1GHz'
direction = "J2000 10h00m00.0s -30d00m00.0s" 
obsmode = "int"
antennalist = 'alma.cycle9.1.cfg'
totaltime = "28800s"
mapsize = "10arcsec"
thermalnoise = ''
simobserve()
</source>

<gallery widths="300px" heights="200px">
File:Complist_only.alma.cycle5.1.skymodel.png|''Figure 4: Note that in the case of component-only simulation, the skymodel graphic produced simply shows the component positions as points.
</gallery>

The simulated visibilities and images are essentially identical, as seen in the analysis.png produced by {{simanalyze}}.

<source lang="python">
default("simanalyze")
project = "complist_only"
vis="complist_only.alma.cycle9.1.ms"
imsize = [256,256]
imdirection = "J2000 10h00m00.0s -30d00m00.0s" 
cell = '0.1arcsec'
niter = 5000
threshold = '10.0mJy/beam'
analyze = True
simanalyze()
</source>

<gallery widths="450px" heights="280px">
File:Complist.only.alma.cycle9.1.analysis.png| ''Figure 5: Simulated observations of a Gaussian and four point sources, all input using the component list.
</gallery>

However, there are some subtle differences between the two methods. When simulating from a componentlist only, {{simobserve}} creates a skymodel image for display purposes (the visibilities are calculated directly from the componentlist).  The choice of pixel size in that display image (called "compskymodel" and "compskymodel.flat") is based on an estimate of the eventual clean beam size, and may not be the same pixel size as defined by for a user-input skymodel image (e.g., the 0.1" pixel chosen for Gaussian.im earlier in this guide).  As the skymodel and compskymodel images are displayed with units of Jy/pixel, different pixel sizes result in different numerical values, even for the same total flux.  Furthermore, any unresolved components are placed in a single pixel of the compskymodel image (or in the case of image plus componentlist input, into the skymodel.flat image).  If the pixel sizes differ significantly, then the position of the source can also differ by as much as a pixel.  

The most important aspects of the simulation are the visibilities and the corresponding simulated (observed) sky image; these are the same for the componentlist+skymodel and the componentlist-only (compare the bottom left plot in Figure 4 and Figure 6 on this page).  However, the small differences in the generated input images (resulting from different pixel sizes) can result in large changes in the difference image.  This is the same case as when, e.g., subtracting a continuum image from a narrow-band CCD image of stars - misalignment by as little as 0.1 pixel can produce visually dramatic residuals in the continuum-subtracted image.   

Thus, when the difference and fidelity images for these two methods are compared, one will find small differences due to these pixelization effects.  In general, for simulations you are advised to use pixels significantly smaller than the clean beam ({{simobserve}} prints warnings when this is not the case), and to be careful of interpreting features of simulated images at dynamic range greater than about 100.

[[Category: Simulations]] [[Category:ALMA]]